• Journal of Information Processing Systems
• /
• v.10 no.2
• /
• pp.176-192
• /
• 2014

The realization of Wireless Multimedia Sensor Networks (WMSNs) has been fostered by the availability of low cost and low power CMOS devices. However, the transmission of bulk video data requires adequate bandwidth, which cannot be promised by single path communication on an intrinsically low resourced sensor network. Moreover, the distortion or artifacts in the video data and the adherence to delay threshold adds to the challenge. In this paper, we propose a two stage Quality of Service (QoS) guaranteeing scheme called Prioritized Multipath WMSN (PMW) for transmitting H.264 encoded video. Multipath selection based on QoS metrics is done in the first stage, while the second stage further prioritizes the paths for sending H.264 encoded video frames on the best available path. PMW uses two composite metrics that are comprised of hop-count, path energy, BER, and end-to-end delay. A color-coded assisted network maintenance and failure recovery scheme has also been proposed using (a) smart greedy mode, (b) walking back mode, and (c) path switchover. Moreover, feedback controlled adaptive video encoding can smartly tune the encoding parameters based on the perceived video quality. Computer simulation using OPNET validates that the proposed scheme significantly outperforms the conventional approaches on human eye perception and delay.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.200-201
• /
• 2016

Recently, according to era of Internet of Things was opened, various mobile devices connected to the internet using wireless communication. Many IoT devices have limited communication performance. Thus, these devices efficiently forward data using an abbreviated ID method. However, movement of devices causes abbreviated ID confliction, and These conflict degraded network performance. Therefore it is important management of ID conflict. In this paper, we proposed an abbreviated ID conflict management method to improve the efficiency of communication in the dynamic IoT network.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.671-672
• /
• 2011

비 신뢰적이고 비 대칭적인 무선 링크를 갖는 무선센서네트워크에서 데이터전송이 성공했음에도 ACK 메시지 전송 실패로 발생하는 불필요한 데이터 재전송을 피해 에너지 효율을 높이는 전송기법들이 제안되었다. 이러한 전송기법의 하나인 Probability-based Data Forwarding(PDF)기법에서 기대 전송 횟수 임계치를 설정해 임계값만큼 데이터를 재전송 하였다면 더 이상 재전송하지 않음으로 불필요한 에너지 낭비를 줄인다. 하지만 PDF 는 데이터 전송 횟수만을 고려함으로, 여전히 ACK 메시지의 신뢰성 있는 전송을 보장하지 못한다. 따라서 본 논문은 에너지 효율적인 PDF 기법에 비 대칭적 무선 노드의 특성을 고려하여 ACK 메시지 전송 시 사용되는 역방향 링크의 신뢰성이 낮다면 높은 신뢰성의 역방향 링크를 갖는 노드들을 선택하여 멀티 홉으로 송신 노드에게 ACK 메시지를 전송하는 기법을 적용한다. 이를 통해 불필요한 데이터 전송을 줄여 에너지의 낭비를 줄이고 무선센서네트워크의 수명을 연장한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1655-1665
• /
• 2017

Recently data centers are being constructed actively by many cloud service providers, enterprises, research institutes, etc. Generally, they are built on tree topology using ECMP data forwarding scheme for load balancing. In this paper, we examine data center network topologies like tree topology and fat-tree topology, and load balancing technologies like MLAG and ECMP. Then, we propose a scheduling algorithm to efficiently transmit particular files stored on the hosts in the data center to the destination node outside the data center, where fat-tree topology and OpenFlow protocol between infrastructure layer and control layer are used. We run performance analysis by numerical method, and compare the analysis results with those of ECMP. Through the performance comparison, we show the outperformance of the proposed algorithm in terms of throughput and file transfer completion time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.993-999
• /
• 2021

Recently, many studies on VNDN technology have been conducted to graft Named Data Networking (NDN) into VANET as a core network technology. VNDN can use the content name to deliver various infotainment application content data through name-based forwarding. When VNDN is used as a communication technology for infotainment applications in connected vehicles, it is possible to realize data-centric networking technology in which data is the subject of communication. It can overcome the limitations of connected vehicle infotainment application service technology based on the host-centric current Internet, such as security attack/hacking, performance degradation in long-distance data transmission, frequent data cut-off. In this paper, we present the main functions provided by VNDN technology, and systematically analyze and organize the issues necessary to realize infotainment application services for connected vehicles in the VNDN environment. Based on this, it can be utilized as basic information necessary to establish infotainment application requirements in VNDN environment.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.9
• /
• pp.209-216
• /
• 2019

Publish-subscribe communication model is popular for various type of distributed applications because of its loosely coupled style connections. Among the various architecture style for publish-subscribe system, peer-to-peer architecture has been used for the mission critical application domain since it provides high scalability and real-timeness. On the other hand, to utilize the bandwidth of given networks, message filtering is frequently used to reduce the number of messages on the system. Even if P2P provides superior scalability, it is hard to apply filtering to the its messaging system because the filtering process should be done on the peer-side in P2P architecture that are usually done on the broker server in conventional pub/sub architecture. In this paper, we propose a hierarchical subscription management structure as well as message forwarding scheme for efficient data dissemination. Our proposed scheme reduces the number of received messages by filter-out un-wanted messages and offloading the message dissemination work to other subscribers to enhance the messaging throughput.

• International Journal of Railway
• /
• v.3 no.2
• /
• pp.39-45
• /
• 2010

The RF-CBTC (Radio Frequency-Communication Based Train Control) System is a communication system in railroad systems. The communication method of RF-CBTC system is the wireless between the wayside device and on-board device. The wayside device collects its location and speed from each train and transmits the distance from the forwarding train to the speed-limit position to it. The on-board device controlling device controls the speed optimum for the train. In the case of the RF-CBTC system used in Korea, transmission frequency is 2.4 [GHz]. It is the range of ISM(Industrial Scientific and Medical equipment) band and transmission of voice and data is performed by CDMA (Code Division Multiple Access) method. So noises are made in the AWGN (Additive White Gaussian Noise) and fading environment. Currently, the SNR (Signal to Noise Ratio) is about 20 [dB], so due to bit errors made by noises, transmission of reliable information to the train is not easy. Also, in the case that two tracks are put to a single direction, it is needed that two trains transmit reliable voice and data to a wayside device. But, by noises, it is not easy that just a train transmits reliable information. In this paper, we estimated the BER (Bit Error Rate) related to the SNR of voice and data transmission in the environment such as AWGN and fading from the RF-CBTC system using the CDMA method. Also, we supposed the SNR which is required to meet the BER standard for voice and data transmission. By increasing the processing gain that is a ratio of chip transmission to voice and data transmission, we made possible voice and data transmission from maximally two trains to a wayside device, and demonstrated it by using Matlab program.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.4
• /
• pp.367-373
• /
• 2022

VANET (Vehicular Ad hoc NETwork) is one of the special cases of the ad hoc networks in which car nodes communicate with each other and/or with RSUs (Road Side Unit) in order for the drivers to receive nearby road traffic information as well as for the passengers to retrieve nearby gas price or hotel information. In case of constructing VANET over CCN, users do not need to specify a destination server address rather to input a key word such as nearby congestion in order to gather surrounding traffic congestion information. Furthermore, each car node caches its retrieved data for forwarding other nodes when requested. In addition, the data transmission is inherently multicast, which implies fast data propagation to the participating car nodes. This paper measures and evaluates the data transmission performance of the VCCN (VANET over CCN) in which nodes are equipped with diverse wireless communication channels. The simulation result indicates that 802.11a shows the best performance of the data transmission against other wireless channels. Moreover, it indicates that VCCN improves overall data transmission and provides benefit to the nodes that request the same traffic information by exploiting inherent multicast communication.

• Journal of KIISE:Information Networking
• /
• v.36 no.3
• /
• pp.222-230
• /
• 2009

A sensor network is an important element of the ubiquitous and it consists of sensor fields that contain sensor nodes and sink nodes that collect data from sensor nodes. Since each sensor node has limited resources, one of the important issues covered in the past sensor network studies has been maximizing the usage of limited energy to extend network lifetime. However, most studies have only considered fixed sink nodes, which created various problems for cases with multiple mobile sink nodes. Accordingly, while maintaining routes to mobile sink nodes, this study aims to deploy the hybrid communication mode that combines single and multi-hop modes for intra-cluster and inter-cluster transmission to resolve the problem of failed data transmission to mobile sink nodes caused by disconnected routes. Furthermore, a 2-level hierarchical routing protocol was used to reduce the number of sensor nodes participating in data transmission, and cross-shape trajectory forwarding was employed in packet transmission to provide an efficient data dissemination method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7A
• /
• pp.706-714
• /
• 2010

In wireless sensor networks, real-time data delivery schemes typically achieve a desired delivery speed by performing one-hop lookahead. Recently, to reduce the deadline miss ratio against the desired delivery speed, a study has proposed a real-time routing protocol based on proactively performing two-hop lookahead. However, the study might cause heavy message exchange overhead and high computing complexity to carry out obtainment of two-hop neighborhood speed information in the entire sensor nodes whether data are delivered or not. Moreover, although multi-hop lookahead provides the least deadline miss ratio, due to the restriction from the overhead and the complexity, the recent study merely adopts the two-hop lookahead manner. In this paper, we propose a novel real-time routing protocol that adopts on-demand neighborhood multi-hop information obtainments only around data forwarding paths. Simulation results prove that the proposed routing protocol offers better performances with respect to deadline miss ratio, total communication costs, energy efficiency, and network lifetime.