• Journal of the Korean Home Economics Association
• /
• v.39 no.10
• /
• pp.29-37
• /
• 2001

The purpose of this study is to investigate the preference and the use of the bedclothes. The data were obtained from market research of 12 department stores which were located in Seoul, Daegu and Busan, and from questionnaires completed by 356 women in Daegu area whose age was 20 years and older. The SPSS package was used for data analysis which includes frequency, percentage, $X^2$test, ANOVA, and Scheffe test. Cotton was the most popular fiber for coverings and fillings. Color preference was in the order of pastel, non-chromatic, vivid, and white color and pattern preference was in order of floral, check, and stripe pattern. Practicality, color and fabric were the most important factors and price was the most unsatisfied factor when bedclothes were purchased. Also, information for bedclothes was obtained mainly through internet shopping, home shopping or catalog shopping.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.2 no.2
• /
• pp.137-154
• /
• 2000

The purpose of this study is to investigate the transition of luster material after the tweentieth century. This study was conducted by means of designer collection, journal of fashion, museum data, fabric exhibition and Internet data. The results of this study were as follows: Before the synthetic fiber period, the luster materials were used satin, chamuse, gauze, damask brocade and velvet, except cashmere, mohair and rayon. They are made from silk by the way of giving difference surface property. But since 1960s, it has used not only synthetic fiber with smooth surface but also vinyl, latex, natural leather, synthetic leather and metal. Luster material recently has a tendency to natural and soft shiny, example silket finish, chintz finish, silico coating finish with paper touch feel and so forth.

• Geomechanics and Engineering
• /
• v.25 no.4
• /
• pp.341-345
• /
• 2021

1D sand compression response to ko-loading experiences volume contraction from low to high effective stress regimes. Previous study suggested compressibility model with physically correct asymptotic void ratios at low and high stress levels and examined only for both remolded clays and natural clays. This study extends the validity of Enhanced Terzaghi model for different sand types complied from 1D compression data. The model involved with four parameters can adequately fit 1D sand compression data for a wide stress range. The low stress obtained from fitting parameters helps to identify the initial fabric conditions. In addition, strong correlation between compressibility and the void ratio at low stress facilitates determination of self-consistent fitting parameters. The computed tangent constrained modulus can capture monotonic stiffening effect induced by an increase in effective stress. The magnitude of tangent stiffness during large strain test should not be associated with small strain stiffness values. The use of a single continuous function to capture 1D stress-strain sand response to ko-loading can improve numerical efficiency and systematically quantify the yield stress instead of ad hoc methods.

• Journal of the Korean Home Economics Association
• /
• v.49 no.4
• /
• pp.105-113
• /
• 2011

The purpose of this study was to develop the pattern of scuba diving suits for local men in their thirties by using 3D body-scanned data. It is widely acknowledged that draping method is more suitable than flat pattern for body shape as most scuba diving suits in the market are designed to fit the body tightly in a single piece with sleeves and legs. A dummy for this study was made based on men's standard clothing sizes in 30's which was derived from data of 2004 Size Korea. Accordingly, the basic body block was built upon through draping method. Next, a scuba diving suit was made from neoprene, followed by fit and the clothing pressure tests in order to evaluate the diving suit's functionality and comfort. The results of the fit test had high points of 4.33 in majority parts except armhole and crotch ones. In comparison of clothing pressure between wearer and dummy, the clothing pressure of wearer was indicated relatively low in most parts other than armhole and knee, resulting from cushion function of skin and muscle and high stretch of fabric.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.10 no.3
• /
• pp.1-13
• /
• 2008

The purpose of this research is to study the cause of obstruction in various knit pattern structures by understanding the needs of the customers, and to develop knitted fabric goods that satisfy the individual taste of consumers and that reflecting the latest fashions. Actual conditions of the manufacturer's designing processes must be examined. In addition, a comparison analysis of fashion sensibilities and preferences between producers and consumers had been made in order to study developing knit pattern structures. Questionnaires and interviews had been used as research methods. The research involved two groups: one group consisted of 57 producers, which included designers, programmers, and merchandisers working for a knit manufacturer in Seoul, while the other group consisted of 74 consumers, which included students with knitted fabric design as their major and those who have working knowledge of knitted fabrics. For a more accurate evaluation, 28 out of 150 patterns have been selected through a preliminary study conducted by 24 designers. On the 28 knit patterns, a sensibility evaluation had been made through the use of the sense of sight and sense of touch, which was followed by a frequency analysis, cluster analysis, and t-test using SPSS 12.0. The results are as follows: the fashion sensibility evaluation on knit patterns showed that structures, such as racking II or lace II, are typically elegant ('elegance'), while structures, such as links I or racking I, are typically 'active.' Furthermore, a 'country' image was displayed in structures such as cable I, cable II, and miss II. Links I appeared as 'sophisticated'. Miss I and milano were said to have 'modem' images. Lace II was regarded as 'ethnic', while racking II was said to have a 'romantic' image. 2:1 rib and milano were generally thought to be manly ('manish'). The fashion sensibility scale for each knit pattern has been made based on the above results. Based on producer and consumer responses, the sensibility evaluation on knit pattern structures showed that the two groups had similar preferences in knit pattern structures. Therefore, the fashion sensibility scale developed in this study can be used as a basic data for structure development when designing knitted fabric goods.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.527-534
• /
• 2006

The purpose of this study is the development of more effective filter-type polymer adsorbent for removal of anionic pollutants from wastewater. In order to synthesize the polymer adsorbent that possesses anionic exchangeable function, carboxyl(-COOH) group of PP-g-AA nonwoven fabric was converted into amine($-NH_2$) group by the chemical modification using diethylene triamine(DETA). FT-IR data indicate that amine group was introduced into PP-g-AA through amidation of grafted acrylic acid by reaction with DETA. The degree of amination increased with increase in the reaction time and temperature of the chemical modification process, and was significantly improved by the pre-swelling treatment of PP-g-AA with solvent and addition of metal chlorides as a catalyst in following order as $NH_4OH>MeOH{\geq}HCl{\geq}H_2O\;and\;AlCl_3>FeCl_3{\geq}SnCl_2{\gg}ZnCl_2{\geq}FeCl_2$, respectively. However, the addition of catalyst limited the reusability of DETA, hence was less useful from the viewpoint of cost effectiveness and waste management. The anion exchange capacity of the aminated PP-g-AA(PP-g-AA-Am) increased with increase in the degree of amination, but it reached maximum value at the degree of amination as about $50{\sim}60%$. The anion exchange capacity of PP-g-AA-Am was higher than those of commercial anion resins.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.1
• /
• pp.55-60
• /
• 2021

In order to produce wearable displays with high adhesion while maintaining flexible characteristics, the adhesive method using electro plating method was carried out. Laser lift-off (LLO) transcription was also used to remove sapphire substrates from LEDs bonded to fibers. Afterwards, the SEM and EDS data of the sample, which conducted the adhesion method using electro plating, confirmed that copper actually grows through the lattice of the fiber fabric to secure the light source and fiber. The adhesion characteristics of copper were checked using Universal testing machine (UTM). After plating adhesion, the characteristics of the LLO transcription process completed and the LED without the transcription process were compared using probe station. The electroluminescence (EL) according to the enhanced current was measured to check the characteristics of the light source after the process. As the current increases, the temperature rises and the bandgap decreases, so it was confirmed that the spectrum shifted. In addition, the change in the electrical characteristics of the samples according to the radius change is confirmed using probe station. The radius strain also had mechanical strength that copper could withstand bending stress, so the Vf variation was measured below 6%. Based on these results, it is expected that it will be applied to batteries, catalysts, and solar cells that require flexibility as well as wearable displays, contributing to the development of wearable devices.

• Journal of Conservation Science
• /
• v.38 no.3
• /
• pp.243-253
• /
• 2022

Using non-destructive analytical methods, we identified the material characteristics of two gold fabric artifacts excavated from the Cheongsong Sim clan (Bugeum Wonsam, Jikgeum Chima), including the artifact condition, fiber type, surface contamination, and metallic threads. We found that the artifacts were buried and had turned brown; thus, we were unable to determine their original color. The fiber type was determined to be silk from cocoons, based on scanning electron microscopy, Fourier transform infrared (FT-IR) analyses of Amide I, II, III, and IV peaks, and color reactions Further, the FT-IR and X-ray fluorescence (XRF) analyses identified the white and black stains as natural resin hydrolyzed substances, such as lipids and proteins, that occurred as microbial decomposition due to body decay. Finally, the XRF analyses identified the thin gold layer of the metallic yarn as gold (Au). According to the FT-IR data and the color reaction to the metallic yarn medium, the adhesive component of the medium was a product of-Amides I, II, III, and 3000 cm^-1 within Amides A and B (an animal type), respectively. Thus, the medium was identified as Hanji (Korean paper), which is made from domestically produced Broussonetia kazinoki fibers.

• Korean Journal of Human Ecology
• /
• v.21 no.2
• /
• pp.299-314
• /
• 2012

The purpose of this study was to explore effects of pattern alteration using a virtual clothing simulation approach in combination with 3D analysis software. Three raglan sleeves of different patterns were worn by an avatar using virtual clothing simulation with silk and cotton as the test fabrics. It was observed that the silhouette and hemline shape were affected differently based on raglan sleeve pattern and fabric type. By examining clothing pressure distribution, the cotton fabric designs and pattern shapes provided for a variety of influences on armhole and bust regions as well as the back sleeve area. For representative locations, cross section circumstance, cross section area, and volume were measured by using 3D analysis and the resulting correlation between the 2D and 3D data were investigated. Among different fabrics, there was little difference between the 2D and 3D clothing surface area. However, when using 3D analysis, clothing volume was significantly affected by different fabrics and pattern types. By simultaneously adopting the virtual simulator and 3D analysis, quantitative assessment of virtual clothing simulation was successfully conducted. In light of the results of this study, the resulting methodology is expected to be used as a comprehensive evaluation tool for virtual clothing simulation wear testing.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.3
• /
• pp.69-83
• /
• 2013

Clothes show not just the different social status of people, but the ideology and value of former society through pattern, colour, materials, shapes, etc. The purpose of this article is to fill the academic blank of this part by researching the pattern of fabric design in Jing Pai(Beiing style) and Hai Pai(Shanghai style) cheong-sam during the period of the Republic of China. The contrastive analysis of regional pattern between Jing Pai and Hai Pai cheong-sam expect to provide the theoretical basis for the former fashion designers and scholars. There are three approaches in the article: Data collection method, comparison method and Combining theory with practice method as film. Regarding components of pattern, both Jing Pai and Hai Pai cheong-sam have mostly single or composite pattern like plants. Further the most of Jing Pai cheong-sam pattern is traditional flower pattern. But Haipai cheong-sam patterns have some western flower pattern. Beside that, it have some geometry pattern. Regarding arrangement of the pattern, both cheong-sams have scattered dot style, the border style, and pictures style. But continuous type of Jing Pai cheong-sam is less while Hai Pai cheong-sam is the most. Comparing Jing Pai cheong-sam color of patterns in "Moment in Peking" is unadorned and types are simple as chinese traditional clothes; However, "In the Mood for Love" introduces us various material colors, new types of patterns and extraneous characteristic geometry patterns of Hai Pai cheong-sam. Generally speaking, the main characteristic of Jing Pai cheong-sam is traditional and conservatism. It keeps Chinese traditional pattern and culture to the most extent. However, Hai Pai cheong-sam are confluent and open with absorbed external culture and techniques which are endowed new artistic color.