• 제목/요약/키워드: Data base

검색결과 5,589건 처리시간 0.039초

고추역병 방제능이 있는 식물성장촉진 균주 Bacillus licheniformis K11의 cellulase 유전자의 cloning 및 효소 특성 조사 (Cloning of the Cellulase Gene and Characterization of the Enzyme from a Plant Growth Promoting Rhizobacterium, Bacillus licheniformis K11)

  • 우상민;김상달
    • Applied Biological Chemistry
    • /
    • 제50권2호
    • /
    • pp.95-100
    • /
    • 2007
  • 식물성장 촉진호르몬인 auxin, 식물병원성 진균을 방제하는 siderophore 그리고 cellulase를 동시에 생산하는 PGPR균이자 생물방제균인 Bacillus licheniformis K11의 cellulase의 유전자를 PCR을 이용해 pUC18에 재조합 후 E. coli DH5${\alpha}$에 cloning하였으며, 이 형질전환 된 균주를 E. coli DH5${\alpha}$(pCW 77)라 하였다. 형질전환 균주 E. coli DH5${\alpha}$(pCW 77)는 B. licheniformis K11의 1.6kb 유전자를 포함하며, 이 cellulase는 1,479 bp, 499개의 amino acid가 암호화된 것으로 추정된다. 형질전환균주가 생산하는 cellulase(CelW)는 lac 프로모터를 이용해 발현되었으며, CMC-SDS-PAGE의 방법으로 약 55 kDa의 분자량을 확인하였다. B. licheniformis K11의 cellulase는 4종의 대표적인 Bacillus spp. 들이 생산하는 cellulase의 아미노산 배열이 97% 이상 일치하였다. CelW는 carboxymethyl-cellulose(CMC) 뿐만 아니라 불용성 섬유소인 Avicel, Filter paper(Whatman$^{\circledR}$ No. 1)는 물론이고 고추역병균 P. capsici의 건조 cell wall도 분해하였다. CMC를 기질로 60$^{\circ}C$에서 효소활성이 가장 높았으며, 최적 pH는 pH 6.0이었다. 그리고 CoCl$_2$ 또는 MnSO$_4$ 첨가시 활성이 2배 이상 증가하였지만, FeCl$_3$ 또는 HgCl$_2$ 첨가 시는 활성이 20% 이하로 떨어졌고, SDS와 sodium azide 등 여러 화학 저해제들을 첨가하여도 87% 이상의 활성을 유지하였다. 이 결과들은 B. licheniformis K11이 식물뿌리에 근권 microflora형성의 중요한 요인으로 작용할 수 있고, 생물방제력을 발휘하는 식물병원성 진균의 세포벽 분해 cellulase 기능 연구를 가능케 하여 식물병의 생물학적 방제 연구에 기초가 될 것이라 생각된다.

Flowable Composite Resin의 미세변연누출 및 전단결합강도 (MICROLEAKAGE AND SHEAR BOND STRENGTH OF FLOWABLE COMPOSITE RESIN)

  • 박성준;오명환;김오영;이광원;엄정문;권혁춘;손호현
    • Restorative Dentistry and Endodontics
    • /
    • 제26권4호
    • /
    • pp.332-340
    • /
    • 2001
  • Flowable composite resin has lower filler content, increased flow, and lower modules of elasticity. It is suggested that flowable composite resin can be bonded to the tooth structure intimately and absorb or dissipate the stress. Therefore, it may be advantageous to use flowable composite resin for the base material of class II restoration and for the class V restoraton. The purpose of this study was to evaluate the microleakage and shear bond strength of four flowable composite resins (Aeliteflo, Flow-It, Revolution, Ultraseal XT Plus) compared to Z100 using Scotchbond Multi Purpose dentin bonding system. To evaluate the microleakage, notch-shaped class V cavities were prepared on buccal and lingual surfaces of 80 extracted human premolars and molars on cementum margin. The teeth were randomly divided into non-thermocycling group (group 1) and thermocycling group (group 2) of 40 teeth each. The experimental teeth of each group were randomly divided onto five subgroups of eight samples (sixteen surfaces). The Scotchbond Multi-Purpose and composite resin were applied for each group following the manufacturer's instructions. the teeth of group 2 were thermocycled five hundred times between 5$^{\circ}C$ and 55$^{\circ}C$. The teeth of group 2 were placed in 2% methylene blue dye for 24 hours, then rinsed with tab water. The specimens were embedded in clear resin, and sectioned longitudinally with a diamond saw. The dye penetration on each of the specimen were observed with a stereomicioscope at $\times$20 magnification. To evaluate the shear bond strength, 60 teeth were divided into five groups of twelve teeth each. The experimental teeth were ground horizontally below the dentinoenamel junction, so that no enamel remained. After applying Scotchbond Multi-Purpose on the dentin surface, composite resin was applied in the shape of cylinder. The cylinder was 4mm in diameter and 2mm in thickness. Shear bond strength was measured using Instron with a cross-head speed of 0.5mm/min. After shear bond strength measurement, mode of failure was evaluated with a stereomicroscope at $\times$30 magnification. All data were statistically analyzed by One Way ANOVA and Student-Newman-Keuls method. The correlation between microleakage and shear bond strength was analyzed by linear regression. The results of this study were as follows ; 1. In non-thermocycling group, the leakage value of Z100 was significantly lower than those of flowable composite resins at the enamel and dentin margin, margin, except that Revolution showed the lower leakage value than that of Z100 at the dentin margin (p<0.05). 2. In thermocycling group, the leakage values of Z100 and Ultraseal XT Plus were lower than those of other subgroup at the enamel and dentin margin, except that Flow-It showed the lower leakage value than that of Ultraseal XT Plus at the dentin margin (p<0.05). 3. The leakage value of Z100 and Ultraseal XT Plus in thermocycling group were not higher than that in non-thermocycling group at the enamel margin. The leakage value of Z100 in thermocycling group was not higher than that in non-thermocycling group at the dentin margin (p<0.05). 4. As for the shear bond strength measurement, there were no statistically significant differences among groups (p<0.05). The shear bond strengths given in descending order were as follows: Z100(16.81$\pm$2.98 MPa), Flow-It(14.8$\pm$4.43 MPa), Aeliteflo(14.34$\pm$3.69 MPa), Revolution(13.46$\pm$4.23 MPa), Ultraseal XT Plus(12.83$\pm$3.16 MPa). 5. Failure modes of all specimens were adhesive failures. 6. There was no correlation between microleakage and shear bond strength.

  • PDF

정원디자인에 나타난 시각적 서술의 표현특성 - 2018 태화강 정원박람회 작품을 대상으로 - (A Characteristics of Visual Narrative Expression in Garden Design - Focused on the Taehwagang Garden Show 2018 -)

  • 권진욱
    • 한국전통조경학회지
    • /
    • 제37권3호
    • /
    • pp.108-118
    • /
    • 2019
  • 정원박람회에서 정원을 감상한다는 것은 자연에 대한 아름다움과 함께 조형예술로서 정원의 내면에 숨겨진 작가들의 개념과 아이디어들을 감상하는 데 의미를 가진다. 본 연구는 정원에 표출된 조형 매체를 통하여 작가의 의도된 표현 특성을 파악하는 데 목적을 두고, 2018 태화강 정원박람회에 전시된 정원 중 총 20개 작품을 대상으로 공간에서 전개되는 시각적 서술의 조형 구조를 파악하였다. 이것은 조형 구조가 조형 매체와 조형 언어를 통하여 내용과 형식으로 전달되는 특성을 반영한 것이다. 작품에 대한 분석은 정원에 표현된 서사구조로부터 조형 구조인 시각언어와 공간 언어를 통하여 매체의 표현 특성을 파악하였으며 결과는 다음과 같다. 첫째, 상호텍스트성을 통한 매체 이미지는 다수의 작품이 '도형적 이미지(figure image)'를 통하여 메시지를 전달하고 있다. 즉 개념은 매체를 통하여 '실제 대상의 유사성'으로 전달되며, 이에 따른 '의미와 의미작용'을 기대하는 것이다. 둘째, 정원에서 상징성을 보여주기 위한 기호(sign) 특성은 '도상(icon)', '지표(index)', '상징(symbol)'으로 구분하여 추출하였다. 그 결과 대부분의 작품은 '도상'과 '상징'을 통하여 이미지와 의미 사이의 공통된 특성을 표현하고 있다. 셋째, 조형 원리에 따른 공간 구성요소들은 '주체적(dominant)'인 역할과 '종속적(subordinate)'인 역할의 요소들이 개념전달을 위한 주요 인자로 도출되었다. 또한 '중첩에 의한 공간 구성'과 '투명에 의한 공간 구성'을 통하여 개념적 층위를 강화하고 있음을 알 수 있다. 넷째, 매체의 공간 점유유형은 중앙홀형, 통로형, 개실형 등이 주를 이루며, 개실형의 경우 특정한 오브제가 아닌 공간 전체영역을 개념화한 특징을 가진다. 동선의 유형은 순회형, 통과형, 회귀형의 순으로 빈도가 도출되었다. 이와 같은 정원디자인에 나타난 시각적 서술의 표현 특성에 대한 연구는 향후 개념의 시각적 연출을 위한 공간설계 기법의 기초자료를 마련하는 데 의의가 있다.

전어 내장(內臟)젓 의 맛성분(成分) (The Taste Compounds in Fermented Entrails of Clupanodon Osdeckii)

  • 정승용;김희숙
    • 한국식품영양과학회지
    • /
    • 제9권1호
    • /
    • pp.23-32
    • /
    • 1980
  • 젓갈은 전통(傳統)있는 수산발효식품(水産醱酵食品)으로서 옛부터 즐겨 먹어온 우리나라 고유(固有)의 기호식품(嗜好食品)으로 널리 애용(愛用)되고 있으나 이들에 관(關)한 상세(詳細)한 연구(硏究)는 많지 않다. 본(本) 연구(硏究)는 전어내장(內臟)젓의 맛성분(成分)을 밝히기 위해 전어내장(內臟)젓 숙성(熟成)중의 유리(遊離)아미노산(酸), 핵산관련물질(核酸關聯物質), betaine, TMAO 및 TMA의 변화(變化)를 실험(實驗)하였다. 전어내장(內臟)젓 숙성(熟成)중 ATP, ADP, AMP 및 IMP는 감소(減少)하고 반면 hypoxanthine은 증가(增加)하여 숙성(熟成) 50일(日) 후에는 7.2u mole/g으로서 원료(原料)에 비(比)하여 2배(倍)나 증가(增加)하였다. 원료(原料)의 유리(遊離)아미노산조성(酸組成)을 보면 함량(含量)이 많은 것은 lysine, glutamic acid, valine, alanine, serine이며 함량(含量)이 적은 것은 arginine, phenyl-alanine, tyrosine이었고 cysteine 및 proline은 흔적량(痕迹量)에 불과(不過)하였다. 젓갈 숙성(熟成) 중 유리(遊離)아미노산(酸)의 양적(量的)인 변화(變化)는 있었으나 조성(組成)에는 변화(變化)가 없었고 대부분(大部分) 원료(原料)에 많았던 lysine, valine, glutamic acid, serine methionine, 등의 유리(遊離)아미노산(酸)이 젓갈중에도 함량(含量)이 많았으며 엑스분질소(分窒素)에 대한 유리(遊離)아미노산질소(酸窒素)의 비율(比率)은 50일간(日間) 숙성(熟成)시킨 젓갈이 가장 높았다. betaine은 젓갈의 숙성(熟成)과 더불어 계속해서 증가(增加)하여 숙성(熟成) 50일(日) 후에는 14.5mg%로서 원료(原料)에 비(比)하여 약(約) 4.5배(倍) 증가(增加)하였다. TMAO는 성숙(成熟) 50일(日) 후에 17.1mg%, TMA는 56.0mg%였다. 전어내장(內臟)젓의 맛성분(成分)으로서는 함량(含量)이 많은 lysine, valine, glutamic acid, leucine, methionine, serine, alanine, arginine 등의 유리(遊離)아미노산(酸)과 핵산관련물질(核酸關聯物質)로서는 hypoxanthine 등이 식염(食鹽)의 짠맛과 조합(組合)되어 전어내장(內臟)젓의 맛에 중요(重要)한 구실을 할 것이라고 추정(推定)된다.

  • PDF

멀티도어코트하우스제도: 기원, 확장과 사례분석 (The Multi-door Courthouse: Origin, Extension, and Case Studies)

  • 정용균
    • 한국중재학회지:중재연구
    • /
    • 제28권2호
    • /
    • pp.3-43
    • /
    • 2018
  • The emergence of a multi-door courthouse is related with a couple of reasons as follows: First, a multi-door courthouse was originally initiated by the United States government that increasingly became impatient with the pace and cost of protracted litigation clogging the courts. Second, dockets of courts are overcrowded with legal suits, making it difficult for judges to handle those legal suits in time and causing delays in responding to citizens' complaints. Third, litigation is not suitable for the disputant that has an ongoing relationship with the other party. In this case, even if winning is achieved in the short run, it may not be all that was hoped for in the long run. Fourth, international organizations such as the World Bank, UNDP, and Asia Development Bank urge to provide an increased access to women, residents, and the poor in local communities. The generic model of a multi-door courthouse consists of three stages: The first stage includes a center offering intake services, along with an array of dispute resolution services under one roof. At the second stage, the screening unit at the center would diagnose citizen disputes, then refer the disputants to the appropriate door for handling the case. At the third stage, the multi-door courthouse provides diverse kinds of dispute resolution programs such as mediation, arbitration, mediation-arbitration (med-arb), litigation, and early neutral evaluation. This study suggests the extended model of multi-door courthouse comprised of five layers: intake process, diagnosis and door-selection process, neutral-selection process, implementation process of dispute resolution, and process of training and education. One of the major characteristics of extended multi-door courthouse model is the detailed specification of individual department corresponding to each process within a multi-door courthouse. The intake department takes care of the intake process. The screening department plays the role of screening disputes, diagnosing the nature of disputes, and determining a suitable door to handle disputes. The human resources department manages experts through the construction and management of the data base of mediators, arbitrators, and judges. The administration bureau manages the implementation of each process of dispute resolution. The education and training department builds long-term planning to procure neutrals and experts dealing with various kinds of disputes within a multi-door courthouse. For this purpose, it is necessary to establish networks among courts, law schools, and associations of scholars in order to facilitate the supply of manpower in ADR neutrals, as well as judges in the long run. This study also provides six case studies of multi-door courthouses across continents in order to grasp the worldwide picture and wide spread phenomena of multi-door courthouse. For this purpose, the United States and Latin American countries including Argentina and Brazil, Middle Eastern countries, and Southeast Asian countries (such as Malaysia and Myanmar), Australia, and Nigeria were chosen. It was found that three kinds of patterns are discernible during the evolution of a multi-door courthouse model. First, the federal courts of the United States, land and environment court in Australia, and Lagos multi-door courthouse in Nigeria may maintain the prototype of a multi-door courthouse model. Second, the judicial systems in Latin American countries tend to show heterogenous patterns in terms of the adaptation of a multi-door courthouse model to their own environments. Some court systems of Latin American countries including those of Argentina and Brazil resemble the generic model of a multi-door courthouse, while other countries show their distinctive pattern of judicial system and ADR systems. Third, it was found that legal pluralism is prevalent in Middle Eastern countries and Southeast Asian countries. For example, Middle Eastern countries such as Saudi Arabia have developed various kinds of dispute resolution methods, such as sulh (mediation), tahkim (arbitration), and med-arb for many centuries, since they have been situated at the state of tribe or clan instead of nation. Accordingly, they have no unified code within the territory. In case of Southeast Asian countries such as Myanmar and Malaysia, they have preserved a strong tradition of customary laws such as Dhammthat in Burma, and Shriah and the Islamic law in Malaysia for a long time. On the other hand, they incorporated a common law system into a secular judicial system in Myanmar and Malaysia during the colonial period. Finally, this article proposes a couple of factors to strengthen or weaken a multi-door courthouse model. The first factor to strengthen a multi-door courthouse model is the maintenance of flexibility and core value of alternative dispute resolution. We also find that fund raising is important to build and maintain the multi-door courthouse model, reflecting the fact that there has been a competition surrounding the allocation of funds within the judicial system.

염기서열결정과 Line Probe 분석법에 의한 Rifampin내성 결핵균의 rpoB 유전자 분석 (Analysis of rpoB Gene in Rifampin-Resistant M. Tuberculosis by Direct Sequencing and Line Probe Assay)

  • 이민기;김윤성;이효진;전두수;윤상명;박삼석;김철민;박순규
    • Tuberculosis and Respiratory Diseases
    • /
    • 제44권2호
    • /
    • pp.251-263
    • /
    • 1997
  • 연구배경 : 다제내성결핵의 증가는 효과적인 결핵 치료를 어렵게 할 뿐만 아니라 결핵관리 사업에 큰 장애로 대두되고 있다. 따라서 다제내성결핵균의 내성획득 기전에 대한 이해와 조기진단 방법의 개발이 시급한 실정이다. 최근 분자생물학의 발달로 결핵균의 유전학적인 검검출방법은 기존 배양검사의 감수성에 필적하는 수준이며, 더 나아가 1차 약제인 INH와 RMP 등의 핵산 수준에서 내성기전에 대한 최근의 연구 결과는 더욱 새롭고 빠른 감수성 검사의 기틀을 마련할 것으로 생각된다. RMP에 대한 M. tuberculosis의 주 내성기전은 RNA polymerase $\beta$subunit (rpoB)의 돌연변이로 보고되고 있다. 방 법 : 본 실험에서 42예의 결핵균 배양검체 (RMP 내성 32예, 감수성 10예)를 선택하여 rpoB 유전자의 돌연변이를 분석하였다. 역교잡법(reverse hybridization)을 이용한 상용화된 INNO-LiPA Line Probe Assay (LiPA)를 이용하여 돌연변이 양상을 검사하고 직접염기서열 방법으로 분석한 결과와 비교하였다. 결 과 : LiPA에서 RMP 감수성균주는 S띠의 발색이 모두 나타났으며, 내성균주는 모두 R띠의 발색이냐 S띠의 소실이 나타나 내성임을 확인할 수 있었다. 내성균주 32예중 22예(68.8%)는 4개의 R띠중 하나의 소실이 있어 바로 돌연변이 양상을 확인할 수 있었으며 R5(S531L)형이 17예(77.3%)로 제일 많았다. LiPA에서 확인되지 않았던 10예는 직접염기서열 분석법으로 내성양상을 검사한 바, 총 11예와 점돌연변이와 1예의 염기결실을 확인하였다. 이중 S522W와 9염기쌍의 결실은 현재까지 보고된 바 없는 처음으로 보고되는 유형의 돌연변이었다. 결 론 : 한국인의 결핵균에서 RMP 내성의 주 기전은 rpoB 유전자의 돌연변이에 의한 RNA polymerase의 구조 변화에 기인하는 것을 알 수 있었고 직접염기서열 결정법으로 그 양상을 확인하였으며, LiPA법이 RMP 내성의 조기진단에 유용하게 이용될 수 있는 것으로 판단되었다.

  • PDF

불완전경쟁하(不完全競爭下)에서의 무역장벽(貿易障壁) 완화효과(緩和效果) (Economic Effects of Eliminating Trade Barriers under Imperfect Competition)

  • 이홍구
    • KDI Journal of Economic Policy
    • /
    • 제14권2호
    • /
    • pp.29-54
    • /
    • 1992
  • 무역자유화(貿易自由化)나 지역경제통합(地域經濟統合)의 경제적(經濟的) 효과(效果)를 논의할 때 시장구조(市場構造)와 규모(規模)의 경제(經濟)와 관련된 개방효과(開放效果)를 분석(分析)하는 것이 중요하다. 잠재시장(潛在市場)의 크기가 확대되는 데에 따르는 제품차별화(製品差別化)의 심화(深化)나 규모(規模)의 경제실현(經濟實現)은 '무역(貿易)의 이익(利益)'의 차원(次元)을 확장시킨다. 개방(開放)에 따르는 해외로부터의 경쟁강화(競爭强化)는 국내기업(國內企業)의 경쟁환경(競爭環境)을 심화(深化)시켜 시장진입(市場進入) 퇴출(退出)과 산업합리화(産業合理化)에 영향을 미치기 때문이다. 본고(本稿)는 무역장벽완화(貿易障壁緩和)가 유발하는 자원배분효과(資源配分效果) 및 후생효과(厚生效果)뿐만 아니라, 시장구조(市場構造)가 불완전경쟁적(不完全競爭的)이고 생산과정(生産過程)에 규모(規模)의 경제(經濟)가 존재(存在)하기 때문에 나타나는 '개방(開放)의 이익(利益)'을 가상적(假想的)인 한국(韓國) 일본(日本)의 쌍무적(雙務的) 관세인하효과분석(關稅引下效果分析)을 중심으로 검토하고 있다. 이를 위하여 전산업을 완전경쟁적(完全競爭的) 산업(産業), 불완전경쟁적(不完全競爭的) 산업(産業), 비교역산업(非交易産業)으로 구성되는 30개 산업으로 분류하였으며, 가상적(假想的)인 관세인하(關稅引下)(한국(韓國)의 경우 법정관세 인하, 일본(日本)의 경우 실적관세율 50%인하)를 상정(想定)하여 이것이 양국의 산업에 미치는 영향을 검토하였다. 관세인하는 산업내(産業內) 무역(貿易)을 증가(增加)시킬 것이나, 산업합리화(産業合理化) 효과(效果)나 규모(規模)의 경제(經濟) 실현(實現)에 미치는 영향은 크지 않을 것으로 추정된다. 또한 관세인하(關稅引下)로 한국(韓國)과 일본(日本)의 총수출(總輸出)과 총수입(總輸入)이 모두 증가하나, 한국(韓國)의 경우 수출증가보다 수입증가가 큰 반면 일본(日本)의 경우 수입증가보다 수출증가가 큰 것으로 나타났다. 한편 관세인하로 한국(韓國)과 일본(日本)의 총산출증가(總産出增加)가 예상되는데, 증가폭은 각각 0.5~0.6%에 이를 것으로 예상된다.

  • PDF

예정원가계산에 의한 감사보수 산정 (Calculating the Audit Fee Based on the Estimated Cost)

  • 문태형
    • 경영과정보연구
    • /
    • 제35권1호
    • /
    • pp.189-206
    • /
    • 2016
  • 2014년도 회계감사보고서부터 외감법의 개정에 따라 감사보고서에 관한 7조의 2의 외부감사 참여인원 수, 감사내용 및 소요시간 등 외부감사 실시내용을 적은 서류를 첨부하도록 되었다. 본 연구에서는 개정된 외부감사 실시내용을 반영하여 정부출연기관의 용역예정원가계산에 의하여 감사보수를 산정한다. 본 연구에서는 대상기업(전기 적정의견, 직전년도 자산총액 1,000억원, 제조업, 사전의 의뢰인 수임에서 내부통제위험 및 유의적인 감사위험이 없는 것으로 가정한 상장기업)을 국가계약법의 용역원가계산 체계에 따라 인건비, 경비, 일반관리비, 이윤의 4가지 비목을 합계하여 감사보수를 산출한다. 그리고 회계감사의 참여자와 감사투입시간을 확인하기 위하여 Big-4 회계법인에 예정원가 산정 대상기업에 대한 견적을 의뢰하여 계정된 외부감사 실시내용을 적은 서류에 따라 수집한 결과를 이용하였다. 인건비는 2014년 학술연구용역비 인건비기준단가의 참여율 150% 적용, 경비는 한국은행의 기업경영분석(2013년)의 회계법인등의 평균을 사용, 일반관리비는 국가를 당사자로 하는 계약에 관한 법률 시행규칙 7조1항 용역업의 일반관리비율 5%를 적용, 이윤은 국가를 당사자로 하는 계약에 관한 법률 시행규칙 7조2항 용역업의 이윤율 10%가 적용되었다. 이를 적용한 예정원가 계산에 의한 감사보수는 50,617,769원이 산출되었다. 본 연구의 결과가 최적의 적정감사보수는 아니다 할지라도 기준이 없는 기업의 감사보수를 비교할 수 있는 기본 척도로 사용 할 수 있을 것이다. 그리고 이러한 외감법의 개정은 이전의 총 투입 감사시간만을 공시한 것보다 감사인의 독립성과 회계제도의 투명성을 제고할 수 있을 것이다.

  • PDF

만성기도폐쇄 환자에서 최대운동부하시 관찰되는 호흡양상 - 기도폐쇄정도와 흡기책임비율변화 사이의 상관관계 - (The Changes of Breathing Pattern Observed During Maximal Exercise Testing in the Patients with Chronic Airflow Obstruction : the Correlation Between the Change of Inspiratory Duty Cycle and the Degree of Airflow Obstruction)

  • 이계영;지영구;김건열
    • Tuberculosis and Respiratory Diseases
    • /
    • 제44권3호
    • /
    • pp.574-582
    • /
    • 1997
  • 연구배경 : 정상인에서는 운동부하시 증가되는 환기량의 요구를 초기에는 상시호흡량의 증가로 후기에는 호흡수의 증가로 충족시키며, 호흡수 증가에 따라 유발되는 호흡주기의 감소를 보상하기 위해 흡기책임비율이 50% 이상까지 증가하는 것으로 알려져 있다. 반면 만성기도폐쇄 환자에서는 환기능력의 감소와 생리적 사강 호흡의 증가로 인해 최대운동부하시 얕고 빠른 호흡양상을 보인다고 알려져 있지만 책임비율의 변화에 대해서는 연구가 많지 않고 이와 기도폐쇄정도와의 관련성에 대해서는 보고가 없는 실정이다. 방 법 : 12명의 만성기도폐쇄 환자와 10명의 정상인을 대조로 점진적 최대운동부하검사를 실시하였다. 결과 분석은 안정시에서 최대운동부하시점까지의 시간을 100%로 하여 rest, 20%, 40%, 60%, 80%, max 등% control duration으로 분획한 후 각 시점에서 1분 환기량, 상시호흡량, 호흡수, 생리적 사강비율, 흡기책임비율 등의 지표를 양군 간에 비교하였다. 결 과 : 1분환기량과 상시호흡량의 안정시에서 최대운동시까지의 변화는 양군 간에 유의한 차이가 관찰되었으나 호흡수는 유의한 차이를 나타내지 않았다. 생리적사강 비율은 정상대조군에 비해 만성기도폐쇄군에서 그 감소가 유의하게 낮았다. 흡기책임비율은 정상대조군에서 $38.4{\pm}3.0%$에서 $48.6{\pm}4.5%$로 증가한 반면 만성기도폐쇄군에서는 $40.5{\pm}2.2%$에서 $42.6{\pm}3.5%$로 별 변화가 없어 양군간에 유의한 변화의 차이가 있음을 확인할 수 있었고 이러한 흡기책임비율의 변화는 기도폐쇄정도 (FEV1%)와 유의한 상관관계가 있음을 확인할 수 있었다. (r=0.8151, p<0.05). 결 론 : 이상의 결과에서 만성기도폐쇄 환자는 최대운동부하시 정상에서 관찰되는 흡기책임비율의 증가가 발생하지 않으며 이는 기도폐쇄의 정도와 유의한 상관성을 갖고 있음을 확인할 수 있었다.

  • PDF

복합 레진에서 마무리 방법에 따른 표면 거칠기 비교 (Comparative study of surface roughness between several finishing and polishing procedures on ormocer-based composite resin and nanohybrid composite resin)

  • 정숙인;오남식;이명현;이은정;조정현;지성원
    • 대한치과보철학회지
    • /
    • 제46권2호
    • /
    • pp.105-115
    • /
    • 2008
  • 전치부 영역에서의 복합 레진을 이용한 수복물의 표면은 착색과 치태 침착이 적어야 하며 치은 조직에 좋은 내성을 갖도록 평활해야 한다. 레진 수복 후 여러 마무리 방법중 blade를 이용한 방법은 치은과 접해있는 변연 부위의 불필요한 레진을 제거하고 마무리하는데 있어 치은 손상을 최소화하면서 간편하게 이용할 수 있는 방법이다. 본 연구의 목적은 현재 많이 사용되고 있는 nano-hybrid composite resin과 ormocer-based compostie resin 간의 여러 가지 마무리 방법에 있어 blade를 이용한 방법과 polishing을 시행한 경우의 표면 거칠기 및 nano계열과 ormocer 계열 복합 레진의 표면 특징을 비교하는 것으로 실험을 위해 가로 6mm, 세로 3mm, 높이 2mm의 금속 주형을 이용하여 레진 블록을 형성하고 대조군은 상면에 mylar strip을 위치시켜 광중합 하였으며, Ormocer - based composite resin ($Admira^{(R)}$)과 nanohybrid composite resin ($Grandio^{(R)}$)에서는 blade를 이용한 경우와 rubber polishing을 이용한 경우를 실험군으로 하였고, ormocer-based flowable composite resin ($Admira^{(R)}$ Flow)과 nanohybrid flowable composite resin ($Grandio^{(R)}$ Flow)에서는 blade를 이용한 경우, rubber polishing을 이용한 경우와 추가적으로 아무것도 시행하지 않은 경우를 실험군으로 하였다. 레진 블록의 표면은 profilometer 및 SEM을 이용하여 거칠기 및 조도를 비교하였으며 통계분석 하였다. 실험 결과 mylar stirp을 적용한 경우 Ra (${\mu}m$) 평균 값은 ormocer-base composite resin이 $0.25{\mu}m$, ormocer-based flowable resin $0.17{\mu}m$, nanohybrid composite resin $0.24{\mu}m$, nanohybrid flowable resin $0.18{\mu}m$ 였으며 blade를 적용한 경우 평균 값은 각각 $0.43{\mu}m$, $0.37{\mu}m$, $0.48{\mu}m$, $0.41{\mu}m$ 였다. 가장 낮은 Ra (${\mu}m$)은 mylar stirp을 적용한 시편에서 얻어졌으며, blade를 이용한 마무리 방법과 rubber polishing을 시행한 경우와 표면 거칠기 비교시 Ra (${\mu}m$)값에서 통계적으로 유의한 차이를 보이지 않았다 (P>0.05). Nanohybrid composite resin이 blade로 마무리하거나 rubber polishing후 ormocer-based composite resin보다 표면 거칠기 증가율이 좀 더 큰 것을 알 수 있었다. 이상의 결과는 blade를 이용한 마무리 방법이 다른 마무리 방법을 대체할 수 있을 것이라는 것을 보여주며, 이에 따라 본 실험 결과에 한정지어 볼 때 복합레진 수복후 마무리 방법으로 blade를 이용하여 시행하는 것이 적용가능 할 것이라 생각된다.