• East Asian mathematical journal
• /
• v.39 no.5
• /
• pp.493-503
• /
• 2023

Tendency prediction of daily confirmed cases is an important issue for public health authorities. To protect the tendency, we estimate the transmission rate of stochastic SEIR model for COVID-19 in Korea using particle Markov chain Monte Carlo method. The results show that the increasing and decreasing tendency of estimated transmission rate appear one or two days in advance compared to daily incidence cases, and as time evolves the standard deviation of the estimates of transmission rate reduces. Since ten months have passed since the first incident case of COVID-19 in Korea, we expect to forecast the tendency of daily confirmed cases for the next one or two days more accurately using our method.

• International Journal of Railway
• /
• v.3 no.2
• /
• pp.39-45
• /
• 2010

The RF-CBTC (Radio Frequency-Communication Based Train Control) System is a communication system in railroad systems. The communication method of RF-CBTC system is the wireless between the wayside device and on-board device. The wayside device collects its location and speed from each train and transmits the distance from the forwarding train to the speed-limit position to it. The on-board device controlling device controls the speed optimum for the train. In the case of the RF-CBTC system used in Korea, transmission frequency is 2.4 [GHz]. It is the range of ISM(Industrial Scientific and Medical equipment) band and transmission of voice and data is performed by CDMA (Code Division Multiple Access) method. So noises are made in the AWGN (Additive White Gaussian Noise) and fading environment. Currently, the SNR (Signal to Noise Ratio) is about 20 [dB], so due to bit errors made by noises, transmission of reliable information to the train is not easy. Also, in the case that two tracks are put to a single direction, it is needed that two trains transmit reliable voice and data to a wayside device. But, by noises, it is not easy that just a train transmits reliable information. In this paper, we estimated the BER (Bit Error Rate) related to the SNR of voice and data transmission in the environment such as AWGN and fading from the RF-CBTC system using the CDMA method. Also, we supposed the SNR which is required to meet the BER standard for voice and data transmission. By increasing the processing gain that is a ratio of chip transmission to voice and data transmission, we made possible voice and data transmission from maximally two trains to a wayside device, and demonstrated it by using Matlab program.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1059-1066
• /
• 2009

In this paper, we propose the precoder with superimposed pilots for orthogonal frequency-division multiple access (OFDMA) systems in order to enhance the transmission efficiency of the system and reduce peak-to-average power ratio (PAPR) which is the problem in OFDMA uplink. In wireless communication systems, the way to improve transmission efficiency is 1) to reduce bit error rate (BER) or 2) to increase data rate. In the proposed scheme, we design the precoder and superimposed pilots in the transmitter and use them in the receiver for increasing data rate, caused by the saved transmission bandwidth thanks to the superimposed pilots. In addition, we improve BER performance with the help of the frequency diversity gain caused by precoding. Also using superimposed pilots, we enhance the PAPR performance by increasing the average output power of the signal.

• Journal of Internet of Things and Convergence
• /
• v.8 no.4
• /
• pp.41-47
• /
• 2022

Smoothing is a transmission plan that converts video data stored at a variable bit rate into a fixed bit rate. Algorithms for smoothing include CBA, which aims to minimize the number of transmission rate increases, MCBA, which minimizes the number of transmission rate changes, and MVBA algorithms that minimize the amount of transmission rate change. This paper compares the proposed algorithm with the CBA algorithm with various video data, buffer size, and performance evaluation factors as a follow-up to the proposed smoothing algorithm that minimizes (maximizes) the transmission rate increase (decrease) when the server requires more bandwidth The evaluation factors used were compared with the number of changes in the fps rate, the minimum fps, the average fps, fps variability, and the number of frames to be discarded. As a result of the comparison, the proposed algorithm showed superiority in comparing the number of fps rate changes and the number of frames discarded.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1180-1186
• /
• 2008

The LNB phase noise of user terminal for high data rate satellite transmission was analyzed in this paper. The phase noise severely affects the service performance in low data rate transmission as well as multi-mode signal for high data rate. As the satellite link frequency is increased, the effects of phase noise for multi-mode signal is increased. The phase noise of LNB, which is operated in high frequency band, is about equal to the transmission system phase noise and have an major effects on service performance degradation. The available transmission mode was analyzed in presence of phase noise of LNB and analysis method for LNB phase noise spectrum distribution was proposed in multi-mode signal.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1679-1685
• /
• 2022

In this paper, we propose an optimal multi-hop transmission scheme to maximize the end-to-end data rate from the source to the destination node in a wireless powered communication network. The frame structure for multi-hop transmission is presented to transmit multi-hop data while harvesting energy. Then, the transmission time of each node that maximizes the end-to-end transmission rate is determined through mathematical analysis in consideration of different harvested energy and link quality among nodes. We derive an optimization problem through system modeling of the considered wireless powered multi-hop transmission, and prove that there is a global optimal solution by verifying the convexity of this optimization problem. This analysis facilitates to find the optimal solution of the considered optimization problem. The proposed optimal multi-hop transmission scheme maximizes the end-to-end rate by allocating the transmission time for each node that equalizes the transmission rates of all links.

• Journal of ILASS-Korea
• /
• v.19 no.2
• /
• pp.64-68
• /
• 2014

A driving vehicle performance which is driven by FTP-75 mode was simulated by computer. Throttle valve position, engine speed, air mass flow rate, fuel consumption et al. were computer simulated. A set of engine part load performance data, automatic transmission shift map and vehicle specifications were used for the computer simulation. Throttle valve position, engine speed, air mass flow rate et al. measured for evaluating the computer simulation results by driving the vehicle with FTP-75 mode on a chassis dynamometer. GT-Power$^{(R)}$ software was used for the computer simulation of the driving vehicle performance. Experimental fuel consumption rate was measured by using an ECU HILS fuel injection system. The experimental data and simulation results were compared. The computer simulation of the driving vehicle performance predicts the measured data well comparatively.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.121-129
• /
• 2012

In this paper, we proposed WBAN system model to management an application that requires low rate data transfer in IEEE 802.15.4. We have to use different wireless sensor network technology to transfer different date rate and emergency message in medical application service. A suitable system model for WBAN and a WBAN MAC protocol in order to solve these existing system problems are proposed. Firstly, the priority queuing was applied to contention access period, and the system model which could guarantee transmission of a MAC command frame was proposed. Secondly, the MAC frame was newly defined to use the system model which was proposed above. Thirdly, WBAN CSMA/CA back-off algorithm based on data transmission rate was proposed to enhance data throughput and transmission probability of the data frame which does not have priority in the proposed WBAN system. The proposed algorithm is designed to be variable CSMA/CA algorithm parameter, depending on data rate. For the evaluation of WBAN CSMA/CA algorithm, we used Castalia. As a result of the simulation, it is found that the proposed system model can not only relieve loads of data processing, but also probability of collision was decreased.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.520-526
• /
• 2018

In this paper, considering the superposition transmission-based wireless cooperative multicast communication system (ST-CMS) with multiple relays and destinations, we propose a relay selection scheme to improve the data rate of multicast communication. In addition, we adopt the optimal power allocation coefficient for the superposition transmission to maximize the data rate of the proposed relay selection scheme. To propose the relay selection scheme, we derive an approximate expression for the data rate of the ST-CMS, and present the relay selection scheme using only partial channel state information based on the approximate expression. Moreover, we derive an approximate average data rate of the proposed relay selection scheme. Through numerical investigation, comparing the average data rates of the proposed relay selection scheme and the optimal relay selection scheme using full channel state information, we show that the proposed scheme provides extremely similar performance to the optimal scheme in the high signal-to-noise power ratio region.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.553-556
• /
• 2003

In this paper was studied the improvements and increasements of the data transmission rate in UWB (Ultra wideband) systems. so Considered that previous UWB systems of code structure and proposed the New constructure that was synthesized the PPM and Bi-Phase Modulation structure, may increase the data transmission rate of multiple channel structure using Time-slots. This proposed structure was modeled suitable at Home Networking conditions and was simulated. and so measure the performance of coding construction, and compare that New synthesized structure with early structure. so we can verify the superiority of New experiment.