• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.115-119
• /
• 2005

In this paper, we propose a method that search the sweet spot of array antenna beam, and keep it for fast speed transmission in millimeter wave on single array antenna link. We use TDD(Time Division Duplex) as transfer method, and it transfers the control data of antenna. The proposed method is the modified genetic algorithm which selects a superior initial group through slave-processing in order to resolve the local solution of genetic algorithm. The efficiency of the proposed method is verified by means of simulations with white Gaussian noise and not on single array antenna link.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.113-116
• /
• 2006

In order to fully utilize the inherent precision that GPS observables could offer, accurate estimation of dynamic and measurement parameters is vital. Among these parameters some are indispensable in virtually every form of GPS processing, while some are limitedly relevant to a particular application. In the context of time transfer by GPS, the transmission-related errors such as ionospheric and tropospheric delays, and the integer ambiguity of the carrier phase observables belong to the former, the atomic clock parameters and data batch-related parameters to the latter. Obviously the atomic clock parameters are of prime importance in GPS time transfer. In this study some of important parameters in conducting time transfer experiments by use of GPS were characterized and their effects on time transfer performance were investigated in detail

• The KIPS Transactions:PartC
• /
• v.10C no.4
• /
• pp.479-484
• /
• 2003

In the current Internet, it is difficult for an Internet Phone to guarantee the QoS due to variable network conditions such as packet loss rate, delay and bandwidth. In addition, the QoS of an Internet Video Phone is more hard to guarantee because of video data. In this paper, we investigate application-level QoS control schemes that can adapt to variable network conditions, and describe an error control scheme and a congestion control scheme. Based on these QoS control schemes, we have designed and implemented an Internet Video Phone System that supports adaptive audio and video delivery. Through experiments, we found that the Internet Video Phone can reduce the packet loss rate considerably as well as adjust the transmission rate considering other TCP flows.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.991-1000
• /
• 2019

The flying-disc game has started since 1940. It has been spreading rapidly in Korea since 2007, mainly in elementary schools. Additionally, as sports science has been developed, research on flying discs has been continued to build a monitoring system for technological improvement and efficiency. In this paper, we acquire information on the user's flying-disc using 9-axis motion sensor and GPS. Then we propose a method for wireless transmission using Bluetooth 5.0. Specifically, the HW platform was designed and implemented not only to monitor a real-time data but also to compare and analyze rotational speed, flight trajectory, and a count of disc rotation through post-processing.

• Current Optics and Photonics
• /
• v.2 no.2
• /
• pp.134-139
• /
• 2018

A novel approach for frequency-tripling vector signal generation via balanced detection without precoding and optical filter is proposed. The scheme is mainly utilizing an integrated dual-polarization quadrature phase shift keying (DPQPSK) modulator. In the DPQPSK modulator, one QPSK modulator is driven by an RF signal to generate high-order optical sidebands, while the other QPSK modulator is modulated by I/Q data streams to produce baseband vector signal as an optical carrier. After that, a frequency-tripling 16-quadrature-amplitude-modulation (16QAM) vector millimeter-wave (mm-wave) signal can be obtained by balanced detection. The proposed scheme can reduce the complexity of transmitter digital signal processing. The results show that, a 4 Gbaud baseband 16QAM vector signal can be generated at 30 GHz by frequency-tripling. After 10 km single-mode fiber (SMF) transmission, the constellation and eye diagrams of the generated vector signal perform well and a bit-error-rate (BER) below than 1e-3 can be achieved.

• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2910-2917
• /
• 2020

Digital light processing three-dimensional (3D) printing technique is a powerful tool to rapidly manufacture plastic scintillators of almost any shape or geometric features. In our previous study, the main properties of light output and transmission were analyzed. However, a more detailed study of the other properties is required to develop 3D printed plastic scintillators with expectable and reproducible properties. The 3D printed plastic scintillator displayed an average decay time constants of 15.6 ns, intrinsic energy resolution of 13.2%, and intrinsic detection efficiency of 6.81% for 477 keV Compton electrons from the ¹³⁷Cs γ-ray source. The 3D printed plastic scintillator showed a similar decay time and intrinsic detection efficiency as that of a commercial plastic scintillator BC408. Furthermore, the presented estimates for the properties showed good agreement with the analyzed data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.759-761
• /
• 2016

ICMP(Internet Control Message Protocol) supports the processing of error in the communication network based TCP/IP. If a problem is occurred in a data transmission process, router or receiving host sends ICMP message containing the error cause to sending host. However, in this process an attacker sends a fake ICMP message to the host so that the communication between the hosts can be abnormally terminated. In this paper, we performed a study to prevent several attacks related to ICMP. To this, we have designed outbound traffic controller so that attack packet is not transmitted to network in operating system of host.

• Smart Media Journal
• /
• v.8 no.1
• /
• pp.35-42
• /
• 2019

With IoT device technology developments, such devices now can perceive the surrounding environment and operate upon the condition, but a method for efficiently processing an enormous amount of IoT device data is required. The existing cloud computing has a transmission delay problem due to load and distance. Fog Computing, an environment to control IoT devices, therefore, emerged to solve this problem. In Fog Computing, IoT devices are located close to each other to solve the shortcomings of the cloud system. While many earlier studies on Fog Computing for IoT mainly focus on its structure and framework, we would like to propose an integrated Fog Computing platform that monitors, analyzes, and controls IoT devices.

• Journal of Conservation Science
• /
• v.37 no.1
• /
• pp.1-12
• /
• 2021

In the digital era, large archives of information and Internet accessibility make information search, including image search, easier and affordable, even from remote locations. Information transmission and sharing can be performed instantly, at any moment. In the case of images, there are risks of transmitting and recklessly sharing intentionally modified images. Such modified images can also be transmitted and used as an additional source of information by followers. In this study, historical portraits of Yu Kil-Chun are shown, who was the first Korean student to study in both Japan and the United States. He was an intellectual, writer, politician, and independence activist of Korea's late Joseon Dynasty. Using image processing software, the portrait images were compared to investigate aging effects and artificial modifications. Statistics of red (R), green (G), blue (B), and L^*, a^*, and b^* values of every pixel in the selected identical areas of the portraits were compared to identify possible causes of variations, including aging effects and artificial modifications. Sepia toning, used in black and white photographs until the 1930s, and modern digital sepia toning can be very confusing owing to their aging effects. The importance of preservation of physical copies and preservation of context (interconnections between data and between documents) is discussed from archiving and conservation science perspectives.

• Journal of KIBIM
• /
• v.10 no.2
• /
• pp.1-11
• /
• 2020

BIM(Building Information Modeling) is a salient technology for influential innovation in the construction industry. The patent network analysis is useful for suggesting the direction of technology development and exploring the research and development field. Therefore, the purpose of this study is to analyze the BIM technology structure and core technologies according to the convergence of BIM technology and market expansion. In this study, social network analysis was conducted by establishing a co-classification IPC network for the United States BIM patent. In particular, the characteristics of the major technical areas in the BIM technology network were identified through centrality analysis. G06F017/00, digital computing or data processing method, is a core technology field in the BIM network. Arrangements, apparatus or systems for transmission of digital information, H04L029/00 is an influential technology across the network. B25J009/00 for program controlled manipulators is an intermediary technology field and G06T019/00, manipulating 3D models or images for computer graphics, is an important field for technological development competitiveness.