• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.171-175
• /
• 1997

We have developed a remote diagnosis system using the LAN and MODEM which enables a routine check for a patient remotely. We used $LabVIEW^{TM}$ as the programing development tool and DAQ (Data Aquisition) board from National Instrument for data aquisition. The LAN card and MODEM are used for the transmission of patient's data. A patient data are aquired by DAQ board and signal processing is done by $LabVIEW^{TM}$, which is a graphical prgamming language. Two methods for the data of transmission. One is the Client-Server model using TCP/IP (Transmission Control Protocol / Internet Address) in the LAN (Local Area Network) Another is using MODEM to transmit the measured data from a patient. In this case, the data transmission is accomplished by the FTP (File Transfer Protocol).

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.1
• /
• pp.62-69
• /
• 2013

This paper proposes real-time video transmission system by the car-mounted cameras based on MOST Network. Existing vehicles transmit videos by connecting the car-mounted cameras in the form of analog. However, the increase in the number of car-mounted cameras leads to development of the network to connect the cameras. In this paper, DSP is applied to process MPEG 2 encoding/decoding for real-time video transmission in a short period of time. MediaLB is employed to transfer data stream between DSP and MOST network controller. During this procedure, DSP cannot transport data stream directly from MediaLB. Therefore, FPGA is used to deliver data stream transmitting MediaLB to DSP. MediaLB is designed to streamline hardware/software application development for MOST Network and to support all MOST Network data transportation methods. As seen in this paper, the test results verify that real-time video transmission using proposed system operates in a normal matter.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.993-997
• /
• 2004

A data error inspection algorithm for wireless digital data communication was developed. Original data converted By wireless digital data error inspection algorithm. Wireless digital data is high possibility to get distortion and lose by noise and barrier on wireless. If the data check damaged and lost at receiver, can't make it clear and can't judge whether this data is right or not. Therefore, by wireless transmission data need the data error inspection algorithm in order to decrease the data distortion and lose and to monitoring the transmission data as real time. This study consists of RF station for wireless transmission, Water Level Meter station for water level measurement and Error inspection algorithm for error check of transmission data. This study is also that investigation and search for error inspection algorithm in order to wireless digital data transmission in condition of the least data's damage and lose. Designed transmitter and receiver with one - chip micro process to protect to swell the volume of circuit. Had designed RF transmitter - receiver station simply by means of ATMEL one - chip micro processing the systems. Used 10mW of the best RF power and 448MHz-449MHz on frequency band which is open to public touse free within the limited power.

• Journal of the Korean Professional Engineers Association
• /
• v.16 no.4
• /
• pp.15-19
• /
• 1983

Therefore the use of Hadamard transform in the image processing requires only the real number operations and results in the computational advantages. Recently, however, certain degradation aspects have been reported. In this paper we propose a WH matrixtwhich retains the main properties of Hadamard matrix. The actual improvement of the image transmission in the inner part of the picture has been demonstrated by the computer simulated image developments. The orthogonal transforms such as Hadamard transform offers a useful facility in the digital signal processing. As the size of the transmission block increases, however, the assignment of bits for each data must increase exponentially. Thus the SNR of the image tends to decline accordingly. As an attempt to increase the SNR, we propose the WH matrix whose elements are made of ${\pm}$1, ${\pm}$2, ${\pm}$3, ${\pm}$4, and the unitform is 8${\times}$8 matrix.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9B
• /
• pp.1579-1587
• /
• 2000

This paper presents the properties of the RF part in the receiving system based in IMT-2000 terminal technology. It mainly discuss the RF parameter performance of the receiving system for mobile telecommunication comparable to IS-98A and J-STD-018 specifications of commercially available CDMA and PCS, and is to anticipate the processing gain of the IMT-2000 receiving system, processing gain according to data processing rate, and terminal noise figure according to processing gain, relationship between noise figures according to Eb/Nt, Ioc. It is performed by such analysis method as CDMA and PCS receiving systems. Transmission bandwidth is n$\times$1.25 MHz(n=1, 3, 6, 9, 12) which is recommended by Qualcomm and NTT, the leading company in cdma 2000. Data transmission rate of IMT-2000 is classified into three cases as in moving vehicle environment of 144Kbps, outdoor pedestrian environment of 384Kbps, and indoor office environment of 2Mbps

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.486-488
• /
• 2004

The SRI (Super Resolution Imager) uses the CCD (Charge coupled device) detector that is used to convert the light into electronic data. The purpose of the SRI is to obtain data for high resolution images by converting incoming light into digital stream of pixel data. The SRI has a high resolution, so this electronic system needs more fast imaging data processing, detector control and data transmission systems. This report describes the required system specification and manufactured electronic system for satellite.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.1009-1011
• /
• 2011

With the growth of Smart Grid technologies, security and privacy will become the most important issues and more attention should be paid. There are some existing solutions about anonymization of smart meters, however, they still have some potential threats. In this paper, we describe an enhanced method to protect the privacy of consumer data. When metering data are required by a utility or the electrical energy distribution center for operational reasons, data are delivered not with the real IDs but with temporary IDs. In addition, these temporary IDs are changed randomly to prevent the attackers from analyzing the energy usage patterns. We also describe secure data transmission method for securing data delivered. In this way, we can enhance the privacy of Smart Grid System with low overhead.

• The Journal of the Korea Contents Association
• /
• v.5 no.5
• /
• pp.43-50
• /
• 2005

POS system that become that is supply net administration and computerization fetters of customer management that become point in istribution network constructed database and use XML-Encryption that is certificate techniques of PKI and standard of security for security that is XML's shortcoming and design distributed processing POS system using XML for data integration by introduction of Ubiquitous concept. This POS system has four advantages. First, Because there is no server, need not to attempt authentication and data transmission every time. Second, can integrate data base by XML and improve portability of program itself. Third, XML data in data transmission because transmit data after encryption data safe .Fourth, After encode whenever process data for data breakup anger of POS system client program and elevation of the processing speed, transmit at because gathering data at data transmission.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.5
• /
• pp.125-131
• /
• 2000

In this paper, we proposed conditional access algorithm for data confidential using smart card. This algorithm is constructed smart card and E-mail gateway for restricting of user's illegal confidential data transmission. After processing of certification procedure in smart card, each E-mail forwarded to E-mail gateway(EG). The EG selects outgoing E-mail and it is sent to fire-wall E-mail processing program, it is checked attached file in transmission mail and if it is attached file, it writes to database. This time, it can be used evidence data about user's illegal confidential data transmission, because of using registered content and smart card certification data in database. in addition to, we can get psychologically effect of prevention to send illegally, and this system can prevent spam mail in EG, also.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.4
• /
• pp.291-296
• /
• 2015

Transmission line is exposed to a large area, and then faults are likely to occur than the other component of power system. When a fault occurs on a transmission line, fault locator helps fast recovery of power supply on power system. This paper deals with the design of a digital fault locator for improvement accuracy of the fault distance estimation and a fault occurrence position for transmission line. The algorithm of a fault locator uses a DC offset removal filter and DFT filter. The algorithm utilizes a fault data of GPS time synchronized. The computed fault information is transmitted to the other side substation through communication. The digital fault locator includes MPU module, ADPU module, SIU module, and a power module. The MMI firmware and software of the fault locator was implemented.