• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2218-2221
• /
• 1998

Data compression of 3 dimensional objects has limitations such as large data size, slow processing time, uncertainties of noise and measurement errors. Recently, along with activities of information transmission in internet, the researches in 3 dimensional information processing become a very important issue as the exchanges of large data are available. In this paper, we propose a data compression algorithm which first estimates the surfaces of 3 dimensional objects and then apply them to the FCV(Fuzzy c-Varieties) Clustering to obtain 3 dimensional edges and vertices, and represent the results.

• Journal of Biosystems Engineering
• /
• v.36 no.2
• /
• pp.130-139
• /
• 2011

Three modes of VIS/NIR spectroscopic measurement (interactance and two modes of transmission) were compared for their ability to estimate soluble solids content (SSC) of 'Shingo' pear non-destructively. The two transmission modes are named as full- and semi-transmission, where full-transmission stands for passing of light through abdomen of pear and semi-transmission is for transit of light mainly through flesh of pear. For comparison of the modes, prediction models developed from the collected spectroscopic data by the three modes were developed and tested for comparison of their performance. Partial least square regression (PSLR) was used to develop the models and various pre-processing methods were applied to develop models of high accuracy. The experiment was repeated three times with pears produced in different regions. The experiments resulted that selection of pre-processing is very important to attain accurate models, and multiplicative scatter correction (MSC) was selected as a pre-processor of high accuracy for the three modes of spectroscopic measurement in every experiment. Except for MSC, different group of pre-processing methods were selected for the three modes of measurement in every experiment without any tendency to the tested modes of measurement and pears of different produced region. Root-mean-square error of prediction (RMSEP) of prediction models of the three modes of measurement using prepreocessor of MSC were compared for their ability to estimate SSC. The models resulted in ranges of $0.37{\sim}0.57^{\circ}Brix$, $0.65{\sim}0.72^{\circ}Brix$, $0.39{\sim}0.51^{\circ}Brix$ for interactance, full- and semi-transmission, respectively. As shown, modes of semi-transmission and interactance resulted about the same level of prediction accuracy and were noted as modes of high performance to predict SSC.

• The KIPS Transactions:PartB
• /
• v.13B no.2 s.105
• /
• pp.105-114
• /
• 2006

In ubiquitous environment where various kinds of computers are embedded in persons, objects and environment and they are interconnected and can be used in my place as necessary, different types of data need to be exchanged between heterogeneous machines through home network. In the environment, the efficient processing, transmission and monitoring of image data are essential technologies. We need to make research not only on traditional image processing such as spatial and visual resolution, color expression and methods of measuring image quality but also on transmission rate on home network that has a limited bandwidth. The present study proposes a new motion vector estimation algorithm for transmitting, processing and controlling image data, which is the core part of contents in home network situation and, using algorithm, implements a real time monitoring system of multi dimensional images transmitted from multiple cameras. Image data of stereo cameras to be transmitted in different environment in angle, distance, etc. are preprocessed through reduction, magnification, shift or correction, and compressed and sent using the proposed metamorphosis hierarchical motion vector estimation algorithm for the correction of motion. The proposed algorithm adopts advantages and complements disadvantages of existing motion vector estimation algorithms such as whole range search, three stage search and hierarchical search, and estimates efficiently the motion of images with high variation of brightness using an atypical small size macro block. The proposed metamorphosis hierarchical motion vector estimation algorithm and implemented image systems can be utilized in various ways in ubiquitous environment.

• The KIPS Transactions:PartC
• /
• v.16C no.2
• /
• pp.237-244
• /
• 2009

The congestion in wireless sensor network increases the ratio of data loss and causes the delay of data. The existing congestion protocols for wireless sensor network reduces the amount of transmission by control the sampling frequency of the sensor nodes related to the congestion when the congestion has occurred and was detected. However, the control method of sampling frequency is not applicable on the situation which is sensitive to the temporal data loss. In the paper, we propose a new congestion control, ACT - Adaptive Congestion conTrol. The ACT monitors the network traffic with the queue usage and detects the congestion based on the multi level threshold of queue usage. Given network congestion, the ACT increases the efficiency of network by adaptive flow control method which adjusts the frequency of packet transmission and guarantees the fairness of packet transmission between nodes. Furthermore, ACT increases the quality of data by using the variable compression method. Through experiment, we show that ACT increases the network efficiency and guarantees the fairness to sensor nodes compared with existing method.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11S
• /
• pp.3190-3198
• /
• 1999

Because of the rapid growth of the mobile communication, the need for the mobile internet access has grown up as well. since the current mobile communication network, however, is optimized for a voice communication system, which exclusively occupies a channel for a given time, it is not suitable for variable rate packet data. In order to support the mobile internet access, it is essential do design a reasonable packet switching network which supports the mobility. Since mobile packet network has longer latency, high speed switching and QoS are required to meet the user's requirements. In this paper, we suggest an resonable way to construct a network and its operation procedures utilizing GPRS(General Packet Radio Service) network and MPLS(Multi Protocol Label Switching) to provide a high speed switching and QoS mobile internet access. GPRS is used as a network which supports the mobility and MPLS guarantees the QoS and high speed IP protocol transmission based on the ATM switching technology.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.1183-1186
• /
• 2014

Our research is different form traditional to have some large LED screen grouping together to constitute multi-vision technique. In this paper, we purpose a method of using k-path diffusion method to build connect between the devices and find an optimal data transmission path. In second half of this paper, through practical application, we using this technique transmitting data successfully and achieving a simple Multi-vision effect. This technique possess smart devices and Wifi P2P's features, these features improve system's dynamic and decentralized processing ability make our technique has high scalability.

• Journal of Information Processing Systems
• /
• v.2 no.1
• /
• pp.39-43
• /
• 2006

In this paper, we proposed TASL-MAC, a medium-access control (MAC) protocol for wireless sensor networks. In wireless sensor networks, sensor nodes are usually deployed in a special environment, are assigned with long-term work, and are supported by a limited battery. As such, reducing the energy consumption becomes the primary concern with regard to wireless sensor networks. At the same time, reducing the latency in multi-hop data transmission is also very important. In the existing research, sensor nodes are expected to be switched to the sleep mode in order to reduce energy consumption. However, the existing proposals tended to assign the sensors with a fixed Sleep/Listening schedule, which causes unnecessary idle listening problems and conspicuous transmission latency due to the diversity of the traffic-load in the network. TASL-MAC is designed to dynamically adjust the duty listening time based on traffic load. This protocol enables the node with a proper data transfer rate to satisfy the application's requirements. Meanwhile, it can lead to much greater power efficiency by prolonging the nodes' sleeping time when the traffic. We evaluate our implementation of TASL-MAC in NS-2. The evaluation result indicates that our proposal could explicitly reduce packet delivery latency, and that it could also significantly prolong the lifetime of the entire network when traffic is low.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.1
• /
• pp.21-26
• /
• 2002

Video stream invoke a variety of traffic with the structure of compression algorithm and image complexity. Thus, it is difficult to allocate the resource on the both sides of sender and receiver, and playout on the Internet such as a packet switched network. Thus, in this paper we proposed video stream smoothing using multistream for the effective transmission of video stream. This method specifies the type of LDU(logical data unit) according to the type of original stream, and then makes a large number of streams as a fixed size, and transfers them. So, the proposed method can reduce the buffering time which occurs during the process of the smoothing and prefetch be robust to the jitter on network, as well. Consequently, it has the effective transmission characteristics of fully utilizing the clients bandwidth.

• The KIPS Transactions:PartA
• /
• v.15A no.6
• /
• pp.317-324
• /
• 2008

In this paper, we propose a system which easily controls the existing serially connected multi-channel speakers in a general personal computer by using a USB(Universal Serial Bus) interface. The personal computer as a host of the USB interface analyzes a sound source and sends audio data in a real-time fashion by the use of the isochronous transmission, one of four transmission methods provided by the USB interface. In addition, a channel is assigned by means of the bulk transmission, one of four transmission methods provided by the USB interface. Transmitted data from the USB host are sent to each speaker through compression and packet generation process. Each speaker detects corresponding digital data and regenerates audio signals through DAC(Digital-to-Analog Converter). A user can easily select a sound source file and a channel by the use of a GUI environment in a personal computer.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.642-647
• /
• 2009

We proposed the method of avionics integrated architecture using high-speed fiber optic bus. Typically, data bus of aircraft consists of electronic and optic data transmission method. Avionics systems are difficult to operate the electronic data transmission method for the high speed data processing, synchronization and interconnection between flight control system and flight management system efficiently. In this paper, it is known to look into the problem of data bus and the advanced trend in avionics systems, and propose the appropriate data bus of the advanced avionics systems.