• 디지털콘텐츠학회 논문지
• /
• 제10권4호
• /
• pp.649-657
• /
• 2009

일반적으로 초고속 네트워크에서 실행되는 분산 시스템의 데이터 전달처리 효율은 시스템 구조 및 데이터의 전달처리 시스템에 의존한다. 분산 환경을 이용한 실시간 분산 시뮬레이션 시스템은 데이터전달처리의 실시간성과 시스템의 신뢰성 보장을 위하여 데이터 전달처리 시스템에 의하여 요구된 성능을 만족하고자 하였다. 그러나 실시간 시뮬레이션 시스템에 적용된 클라이언트/서버 기반의 데이터 전달처리 시스템은 시스템의 안정성 및 시스템의 변경에 따른 확장성과 유지보수성 확보가 어려웠다. 따라서 기존의 데이터 전달처리 시스템의 문제점을 해결하기 위하여 새로운 데이터 전달처리 시스템이 필요하다. 본 논문에서는 기존의 실시간 시뮬레이션 시스템을 분석하여 시스템 개선방향을 제시하고, 시스템 확장성, 상호운용성, 재사용성 및 유지보수성을 위하여 소프트웨어 디자인 패턴을 적용한 새로운 실시간 데이터 전달처리 시스템을 제안한다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 춘계학술대회논문집
• /
• pp.33-43
• /
• 2000

In order to streamline the procedure of data transmission in port and logistics industries, MOMAF introduced EDI systems as the method of data transmission of 19 documents 5 years ago. While operating EDI system, MOMAF has found the inconvenience and the inefficiency of using EDI systems in the field of requesting fast response. This thesis focuses on finding the possible fields of on-line processing system instead of EDI system and suggests the economic effects occurred by the on-line processing system. The result of the paper presents that if data transmission area such as 'ocean vessel entrance report', 'application for using tug boat'and 'application for pilot'is changed to on-line processing method, the processing cost and time will be reduced compared with EDI processing method.

• 한국항만학회지
• /
• 제14권2호
• /
• pp.133-142
• /
• 2000

In order to streamline the procedure of data transmission in port and logistics industries, MOMAF introduced EDI systems as the method of data transmission of 19 documents 5 years ago. While operating EDI system, MOMAF has found the inconvenience and the inefficiency of using EDI systems in the field of requesting fast response. This thesis focuses on finding the possible fields of on-line processing system. The result of the paper presents that if data transmission area such as 'application for pilot'is changed to on-line processing method, the processing cost and time will be reduced compared with EDI processing method.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.552-555
• /
• 2002

Wideband CDMA is one of the radio access technologies for the third generation in which voice is the basic service. There has been lot of research work in order to find out the suitable transmission scheme to meet the requirement of accommodating variable type of services in Wideband-CDMA. This paper studies the behavior of different services using different transmission schemes in Wideband CDU and compares their performance in terms of BER. Different transmission schemes are found to be suitable for different services. Transmission schemes used are- fixed processing gain scheme also called as variable bandwidth scheme, single code transmission and multicode transmission. It is found that fixed processing gain scheme is suitable fur high data rates. Single code transmission is suitable fer low data rates where as multicode transmission is suitable for low and medium data rates.

• 한국항공운항학회지
• /
• 제20권4호
• /
• pp.39-44
• /
• 2012

This paper propose a transmission method for "Transportation system" that can decide precise position under wide area road traffic environment. For precise position detecting, central station collect multiple receiver station's satellite navigation data and generate correction information. In this process, we need efficient real time transmission method for satellite navigation message that has variable data size. We propose real time data transmission method. This real time transmission method offer efficient processing structure for multiple receiver station's satellite navigation message. This paper explains proposed real time transmission method and proofs this transmission method.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2003년도 하계학술대회 논문집
• /
• pp.110-113
• /
• 2003

In this paper, the multi-channel high speed data acquisition system is implemented. This high speed signal processing system for 3-D image display is applicable to the manipulation of a medical image processing, multimedia data and various fields of digital image processing. In order to convert the analog signal into digital one, A/D conversion circuit is designed. PCI interface method is designed and implemented, which is capable of transmission a large amount of data to computer. In order to, especially, channel extendibility of images acquisition, bus communication method is selected. By using this bus method, we can interface each module effectively. In this paper, 32-channel A/D conversion and PCI interface system for 3-dimensional and real-time display of the retina image is developed. The 32-channel image acquisition system and high speed data transmission system developed in this paper is applicable to not only medical image processing as 3-D representation of retina image but also various fields of industrial image processing in which the multi-point realtime image acquisition system is needed.

• 한국컴퓨터정보학회논문지
• /
• 제20권12호
• /
• pp.83-90
• /
• 2015

In this paper, we propose a new method for multi transmission method of data among near smart devices. Existing methods require the use of an extra application service where the operating system differs between smart devices. In contrast, the proposed method makes use of the smart device's inner speaker and microphone to confirm the transmission signal. Then, real sharing data is transmitted via WiFi or LTE. Therefore, the proposed method overcomes operating system issues with existing methods. Besides, BUMP technology works in a similar way to the method we propose, it only supports one-to-one transmission. To evaluate the efficacy of the new method, we tested one-to-many data transmission in an experiment: the results showed a 96% success rate. As a result, we believe that the proposed method is an effective multi transmission method of data among near smart devices.

• International Journal of Railway
• /
• 제3권2호
• /
• pp.39-45
• /
• 2010

The RF-CBTC (Radio Frequency-Communication Based Train Control) System is a communication system in railroad systems. The communication method of RF-CBTC system is the wireless between the wayside device and on-board device. The wayside device collects its location and speed from each train and transmits the distance from the forwarding train to the speed-limit position to it. The on-board device controlling device controls the speed optimum for the train. In the case of the RF-CBTC system used in Korea, transmission frequency is 2.4 [GHz]. It is the range of ISM(Industrial Scientific and Medical equipment) band and transmission of voice and data is performed by CDMA (Code Division Multiple Access) method. So noises are made in the AWGN (Additive White Gaussian Noise) and fading environment. Currently, the SNR (Signal to Noise Ratio) is about 20 [dB], so due to bit errors made by noises, transmission of reliable information to the train is not easy. Also, in the case that two tracks are put to a single direction, it is needed that two trains transmit reliable voice and data to a wayside device. But, by noises, it is not easy that just a train transmits reliable information. In this paper, we estimated the BER (Bit Error Rate) related to the SNR of voice and data transmission in the environment such as AWGN and fading from the RF-CBTC system using the CDMA method. Also, we supposed the SNR which is required to meet the BER standard for voice and data transmission. By increasing the processing gain that is a ratio of chip transmission to voice and data transmission, we made possible voice and data transmission from maximally two trains to a wayside device, and demonstrated it by using Matlab program.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제4권9호
• /
• pp.321-326
• /
• 2015

본 논문에서는 가청 주파수 영역 중 사람들에게 거의 들리지 않는 고주파와 순환 중복 검사 기법을 이용하여 스마트 기기 간의 신뢰성 있는 데이터를 무선으로 전송하는 알고리즘을 제안한다. 제안 알고리즘은 스마트 기기의 내장 스피커에서 출력할 수 있는 가청 주파수 영역(20 Hz~22 kHz) 중 고주파 영역인 18 kHz~22 kHz를 사용한다. 이때 데이터의 전송량을 높이기 위해 고주파 영역 1(18.0 kHz~21.2 kHz)에서 여러 개의 주파수를 혼합하여 전달하며, 이와 동시에 전송 데이터의 정확성을 높이기 위해 고주파 영역 2(21.2 kHz~22.0 kHz)에서 순환 중복 검사를 위한 체크섬을 전달한다. 제안 방법의 데이터 전송 속도와 정확성을 확인하기 위해 스마트 북과 스마트 기기 간에 데이터 전달 실험을 하였다. 그 결과 평균 235 ms에 32 bits 데이터를 전송할 수 있었으며, 전송 성공률은 99.47%, 그리고 순환 중복 검사에 의한 에러 검출률은 0.53%인 것을 확인하였다. 따라서 제안 방법은 스마트 기기 간에 무선으로 데이터를 전송할 수 있는 유용한 기술이 될 것이다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.676-678
• /
• 2003

Recently, in according as rapid improvement of telecommunication markets and wireless internet technology, Location- Based Services (LBS) have been discussed as new 'Killer' application. The purpose of LBS is to determine location of user through mobile handset and to offer location information service to end-user. This paper has suggested an efficient transmission scheme of maps data as one of the important content services relating to data transmission of LBS in mobile environment. The basic system consists of three parts : (1) GIS (Geographic Information System) Server for storing, processing and handling map data, (2) Middleware Server for transmitting of map data by request of client, and (3) Client for requesting map data to Server and displaying them on handset. Also, in order to transmit map data, we are to expand WKB (Well Known Binary) in conformance to Simple Feature Specification of OGC (Open GIS Consortium), and increase efficiency of data transmission by developing trans mission data format to be able to transmit lightweight data and considering data compression technology.