• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.6
• /
• pp.698-703
• /
• 2003

This paper presents analog secure communication system about safe speech transmission using chaotic signals. We applied various conditions that happen in actuality communication environment modifying chaotic synchronization and chaotic communication schemes and analyzed restoration performance of speech signal to computer simulation. In transmitter, we made the chaotic masking signal which is added voice signal to chaotic signal using PC(Pecora ＆ Carroll) and SFB(self-feedback) control techniques and transmitted encryption signal to noisy communication channel And in order to calculate the degree of restoration performance, we proposed the definition of analog average power of recovered error signals in receiver chaotic system. The simulation results show that feedback control techniques can certify that restoration performance is superior to quantitative data than PC method about masking degree, susceptibility of parameters and channel noise. We experimentally computed the table of relation of parameter fluxion to restoration error rate which is applied the encryption key values to the chaotic secure communication.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.1
• /
• pp.52-57
• /
• 2014

This paper presents an implementation of a smooth path planning method considering physical limits on a real time operating system for a two-wheel mobile robot. A Bezier curve is utilized to make a smooth path considering a robot's position and direction angle through the defined path. A convolution operator is used to generate the center velocity trajectory to travel the distance of the planned path while satisfying the physical limits. The joint space velocity is computed to drive the two-wheel mobile robot from the center velocity. Trajectory planning, velocity command according to the planned trajectory, and monitoring of encoder data are implemented with a multi-tasking system. And the synchronization of tasks is performed with a real-time mechanism of Event Flag. A real time system with multi-tasks is implemented and the result is compared with a non-real-time system in terms of path tracking to the designed path. The result shows the usefulness of a real-time multi-tasking system to the control system which requires real-time features.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.5
• /
• pp.341-349
• /
• 2003

A real time interactive controller (spectrometer) for magnetic resonance imaging (MRI) system has been developed using high speed digital signal processors (DSP). The controller generates radio frequency (rf) waveforms and audio frequency gradient waveforms and controls multiple receivers for data acquisition. By employing DSPs having high computational power (e.g., TMS320C670l) real time generation of complicated gradient waveforms and interactive control of selection planes are possible, which are important features in real-time imaging of moving organs, e.g., cardiac imaging. The spectrometer was successfully implemented at a 1.5 Tesla whole body MRI system for clinical application. Performance of the spectrometer is verified by various experiments including high- speed imaging such as fast spin echo (FSE) and echo planar imaging (EPI). These high-speed imaging techniques reduce measurement time, however, usually intensify artifact if there is any systematic phase error or jitter in the synchronization between the transmitter, receiver, and gradients.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.1
• /
• pp.70-77
• /
• 2008

On the wireless sensor network MAC protocols, one of main issues is energy enciency. Since several asynchronous wireless sensor network MAC protocols with short preamble sampling scheme can be operated without setting the timing synchronization among neighbor nodes, it consumes a little energy for maintaining protocols. However, each node encounters either preamble or data overhearing problem, because each node wakes up in a different time and must check whether the frame is being sent to itself or not. To solve this overhearing problem, we newly propose B-MAC++ that can reduce the overhearing energy consumption by using short preambles with destination address and payload length. from simulation results, we show that the proposed B-MAC++ has advantageous in terms of power consumption efficiency over other asynchronous wireless sensor network MAC protocols.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.211-220
• /
• 2017

The application of the theoretical model to real assembly lines has been one of the biggest challenges for researchers and industrial engineers. There should be some realistic approach to achieve the conflicting objectives on real systems. Therefore, in this paper, a model is developed to synchronize a real system (A discrete event simulation model) with a theoretical model (An optimization model). This synchronization will enable the realistic optimization of systems. A job assignment model of the assembly line is formulated for the evaluation of proposed realistic optimization to achieve multiple conflicting objectives. The objectives, fluctuation in cycle time, throughput, labor cost, energy cost, teamwork and deviation in the skill level of operators have been modeled mathematically. To solve the formulated mathematical model, a multi-objective simulation integrated hybrid genetic algorithm (MO-SHGA) is proposed. In MO-SHGA each individual in each population acts as an input scenario of simulation. Also, it is very difficult to assign weights to the objective function in the traditional multi-objective GA because of pareto fronts. Therefore, we have proposed a probabilistic based linearization and multi-objective to single objective conversion method at population evolution phase. The performance of MO-SHGA is evaluated with the standard multi-objective genetic algorithm (MO-GA) with both deterministic and stochastic data settings. A case study of the goalkeeping gloves assembly line is also presented as a numerical example which is solved using MO-SHGA and MO-GA. The proposed research is useful for the development of synchronized human based assembly lines for real time monitoring, optimization, and control.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.2
• /
• pp.363-376
• /
• 1997

In this paper, we present a hardware architecture and a sofrware architecture for cimputer based teleconferencing systems.And also we analyse stream adtivation mechanisms for them form the viewpoint of delay. MuX that is a multimedia I/O server provides various processing elements for data I/O, synchronization, interleaving and mixing.We describe methods to build teleconferencing systems with the elements and compares the technique using master click with the techniquie using self clock.In the plase of dta input.the technique using self click is berrer than the technique using master clock.When we generate interleved stream from audio and video stream and activate channel objects by periodic audio stream as activation clock, dealy from imput audio stream to imterleved stream is reduced but delay for video stream is not reduced as much as in the case of audio stream.

• Journal of Digital Convergence
• /
• v.12 no.3
• /
• pp.249-254
• /
• 2014

Wireless LAN system is evolving toward high-speed data transmission and more accurate channel estimation is necessarily required to improve communication performance. The PLCP preamble field in IEEE 802.11 based wireless MODEM consists of ten short symbols and two long symbols and is used for synchronization and channel estimation. The existing least square (LS) channel estimation is based on only two long training symbols. After estimating channel response separately by using each long training symbol, the final channel estimation is obtained by the average of each estimation. In this paper, a new channel estimation algorithm is presented to improve the performance of the existing LS channel estimation algorithm. From the fact that the short training symbol consists of 12 non-zero subcarriers, it gives us a clue of being able to additionally estimate at least one fourth of channel coefficients. The new LS algorithm performs channel estimation based on both two long training symbols and a short training symbol. The proposed LS algorithm shows a little bit performance improvement over the existing LS estimation and it will be able to be applied to the IEEE 802.11p WAVE system.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.2
• /
• pp.53-59
• /
• 2018

This paper proposes a pseudo-random beamforming technique for time-synchronized mobile base stations (BSs) for multi-cell downlink networks which have mobility. The base stations equipped with multi-antennas and mobile stations (MSs) are time-synchronized based on global positioning system (GPS) signals and generate a number of transmit beamforming matrix candidates according to the predetermined pseudo-random pattern. In addition, MSs generate receive beamforming vectors that correspond to the beam index number based on the minimum mean square error (MMSE) using transmit beamforming vectors that make up a number of transmit beamforming matrices and wireless channel matrices from BSs estimated via the reference signals (RS). Afterward, values of received signal-to-interference-plus-noise ratio (SINR) with regard to all transmit beamforming vectors are calculated, and the resulting values are then feedbacked to the BS of the same cells along with the beam index number. Each of the BSs calculates each of the sum-rates of the transmit beamforming matrix candidates based on the feedback information and then transmits the calculated results to the BS coordinator. After this, optimum transmit beamforming matrices, which can maximize a sum-rate of the entire cells, are selected at the BS coordinator and informed to the BSs. Finally, data signals are transmitted using them. The simulation results verified that a sum-rate of the entire cells was improved as the number of transmit beamforming matrix candidates increased. It was also found that if the received SINR values and beam index numbers are feedbacked opportunistically from each of the MSs to the BSs, not only nearly the same performance in sum-rate with that of applying existing feedback techniques could be achieved but also an amount of feedback was significantly reduced.

• Journal of Digital Convergence
• /
• v.13 no.1
• /
• pp.275-281
• /
• 2015

The recent health care is growing rapidly want to receive offers users a variety of medical services, can be exploited easily exposed to a third party information on the role of the patient's hospital staff (doctors, nurses, pharmacists, etc.) depending on the patient clearly may have to be classified. In this paper, in order to ensure safe use by third parties in the health care environment, classify the attributes of patient information and patient privacy protection technique using hierarchical multi-property rights proposed to classify information according to the role of patient hospital officials The. Hospital patients and to prevent the proposed method is represented by a mathematical model, the information (the data consumer, time, sensor, an object, duty, and the delegation circumstances, and so on) the privacy attribute of a patient from being exploited illegally patient information from a third party the prevention of the leakage of the privacy information of the patient in synchronization with the attribute information between the parties.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.4
• /
• pp.41-46
• /
• 2012

This paper suggested that the frequency adaptive antenna matching network design between AP and WLAN(Wireless Local Area Network) terminal for improving performance. The internet data service of the WLAN terminal is communicated through the AP and AP broadcasts the beacon signal including the assigned frequency channel. at that time the antenna matching network path is controlled beacon information after the WLAN terminal searching and synchronization a beacon information. and then the WLAN terminal communicate with AP. controlling the antenna matching network path according to channel information, The WLAN terminal is expected to improve RF output power and sensitivity performance. The VSWR(Voltage Standing Wave Ratio) performance of the designed antenna matching network is measured to about 1.1 ~ 1.2 and then it is operated by the channel information of the AP.