• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.3
• /
• pp.97-104
• /
• 2010

The purpose of this study is to evaluate sediment yield reduction under various field slope conditions with rice straw mat. The Vegetative Filter Strip Model-W (VFSMOD-W) and Soil and Water Assessment Tool (SWAT) were used for simulation of sediment yield reduction effect of rice straw mat. The Universe Soil Loss Equation Practice factor (USLE P factor), being able to reflect simulation of rice straw mat in the agricultural field, were estimated for each slope with VFSMOD-W and measured soil erosion values under 5, 10, and 20 % slopes. Then with the regression equation for slopes, USLE P factor was derived and used as input data for each Hydrological Response Unit (HRU) in the SWAT model. The SWAT Spatially Distributed-HRU (SD-HRU) pre-processor module was utilized, moreover, in order to consider spatial location and topographic features (measured topographic features by field survey) of all HRU within each subwatershed in the study watershed. Result of monthly sediment yield without rice straw mat (Jan. 2000 - Aug. 2007) was 814.72 ton/month, and with rice straw mat (Jan. 2000 - Aug. 2007) was 526.75 ton/month, which was reduced as 35.35 % compared without it. Also, during the rainy season (from Jun. to Sep. 2000 - 2007), when without vs. with rice straw mat, monthly sediment indicated 2,109.54 ton and 1,358.61 ton respectively. It showed about 35.60 % was reduced depending on rice straw mat. As shown in this study, if rice straw mat is used as a Best Management Practice (BMP) in the sloping fields, rainfall-driven sediment yield will be reduced effectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.2 no.2
• /
• pp.63-81
• /
• 2008

WiMAX has been introduced as a competitive alternative for metropolitan broadband wireless access technologies. It is connection oriented and it can provide very high data rates, large service coverage, and flexible quality of services (QoS). Due to the large number of connections and flexible QoS supported by WiMAX, the uplink access in WiMAX networks is very challenging since the medium access control (MAC) protocol must efficiently manage the bandwidth and related channel allocations. In this paper, we propose and investigate a cost-effective WiMAX bandwidth management scheme, named the WiMAX partial sharing scheme (WPSS), in order to provide good QoS while achieving better bandwidth utilization and network throughput. The proposed bandwidth management scheme is compared with a simple but inefficient scheme, named the WiMAX complete sharing scheme (WCPS). A maximum entropy (ME) based analytical model (MEAM) is proposed for the performance evaluation of the two bandwidth management schemes. The reason for using MEAM for the performance evaluation is that MEAM can efficiently model a large-scale system in which the number of stations or connections is generally very high, while the traditional simulation and analytical (e.g., Markov models) approaches cannot perform well due to the high computation complexity. We model the bandwidth management scheme as a queuing network model (QNM) that consists of interacting multiclass queues for different service classes. Closed form expressions for the state and blocking probability distributions are derived for those schemes. Simulation results verify the MEAM numerical results and show that WPSS can significantly improve the network’s performance compared to WCPS.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.6
• /
• pp.21-30
• /
• 2002

A preconditioned Navier-Stokes code was parallelized by the domain decomposition technique, and the accuracy of the parallelized code was verified through a comparison with the result of a sequential code and experimental data. Parallel performance of the code was examined on a Myrinet based PC-cluster and a Fast-Ethernet system. Speed-up ratio was examined as a major performance parameter depending on the number of processor and the network communication topology. In this test, Myrinet system shows a superior parallel performance to the Fast-Ethernet system as was expected. A test for the dependency on problem size also shows that network communication speed in a crucial factor for parallel performance, and the Myrinet based PC-cluster is a plausible candidate for high performance parallel computing system.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.2
• /
• pp.232-239
• /
• 2016

Recently, in order to increase the efficiency and mission success rate of UAVs (Unmanned Aerial Vehicles), the necessity for formation flights is increased. In general, GPS (Global Positioning System) is used to obtain the relative position of leader with respect to follower in formation flight. However, it can't be utilized in environment where GPS jamming may occur or communication is impossible. Therefore, in this study, monocular vision is used for measuring relative position. General PC-based vision processing systems has larger size than embedded systems and is hard to install on small vehicles. Thus FPGA-based processing board is used to make our system small and compact. The processing system is divided into two blocks, PL(Programmable Logic) and PS(Processing system). PL is consisted of many parallel logic arrays and it can handle large amount of data fast, and it is designed in hardware-wise. PS is consisted of conventional processing unit like ARM processor in hardware-wise and sequential processing algorithm is installed on it. Consequentially HW/SW co-designed FPGA system is used for processing input images and measuring a relative 3D position of the leader, and this system showed RMSE accuracy of 0.42 cm ~ 0.51 cm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8A
• /
• pp.785-793
• /
• 2007

This paper presents the digital signal processing submodule of a 100Base-TX Ethernet receiver to support 100Mbps at TP cable channel. The proposed submodule consists of programmable gain controller, timing recovery, adaptive equalizer and baseline wander compensator. The measured Bit Error Rate is less than $10^{-12}BER$ when continuously receiving data up to 150m. The proposed signal processing submodule is implemented in digital circuits except for PLL and amplifier. The performance improvement of the proposed equalizer and BLW compensator is measured about 1dB compared with the existing architecture that removes BLW using errors of an adaptive equalizer. The architecture has been modeled using Verilog-HDL and synthesized using samsung $0.18{\mu}m$ cell library. The implemented digital signal processing submodule operates at 142.7 MHz and the total number of gates are about 128,528.

• Smart Structures and Systems
• /
• v.16 no.3
• /
• pp.383-399
• /
• 2015

Today, as railways increase their capacity and speeds, it is more important than ever to be completely aware of the state of vehicles fleet's condition to ensure the highest quality and safety standards, as well as being able to maintain the costs as low as possible. Operation of a modern, dynamic and efficient railway demands a real time, accurate and reliable evaluation of the infrastructure assets, including signal networks and diagnostic systems able to acquire functional parameters. In the conventional system, measurement data are reliably collected using coaxial wires for communication between sensors and the repository. As sensors grow in size, the cost of the monitoring system can grow. Recently, auto-powered wireless sensor has been considered as an alternative tool for economical and accurate realization of structural health monitoring system, being provided by the following essential features: on-board micro-processor, sensing capability, wireless communication, auto-powered battery, and low cost. In this work, an original harvester device is designed to supply wireless sensor system battery using train bogie energy. Piezoelectric materials have in here considered due to their established ability to directly convert applied strain energy into usable electric energy and their relatively simple modelling into an integrated system. The mechanical and electrical properties of the system are studied according to the project specifications. The numerical formulation is implemented with in-house code using commercial software tool and then experimentally validated through a proof of concept setup using an excitation signal by a real application scenario.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.643-645
• /
• 2013

When you convert word processor files with large amounts of input data to PDF files in on/off line, current PDF conversion solutions do one of the source files to perform the conversion task in the Windows PDF virtual printer environment. Depending on the size of the original PDF file conversion speed to convert PDF to do a large amount of different and if you are performing a very slow speed. When you convert files to PDF in this sequence, depending on the capacity of the original file, PDF conversion rate is different, if automating a mass conversion to the PDF, the speed is very slow. In this paper, the PDF conversion which can use the Windows Terminal Server from one Windows Server when performing a PDF conversion processing of the source file, to create a multi-session Terminal, to perform the PDF conversion process at the same time was studied.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.5
• /
• pp.341-349
• /
• 2003

A real time interactive controller (spectrometer) for magnetic resonance imaging (MRI) system has been developed using high speed digital signal processors (DSP). The controller generates radio frequency (rf) waveforms and audio frequency gradient waveforms and controls multiple receivers for data acquisition. By employing DSPs having high computational power (e.g., TMS320C670l) real time generation of complicated gradient waveforms and interactive control of selection planes are possible, which are important features in real-time imaging of moving organs, e.g., cardiac imaging. The spectrometer was successfully implemented at a 1.5 Tesla whole body MRI system for clinical application. Performance of the spectrometer is verified by various experiments including high- speed imaging such as fast spin echo (FSE) and echo planar imaging (EPI). These high-speed imaging techniques reduce measurement time, however, usually intensify artifact if there is any systematic phase error or jitter in the synchronization between the transmitter, receiver, and gradients.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.3
• /
• pp.430-433
• /
• 2007

There have been several researches to manipulate XML Queries efficiently since XML has been accepted in many areas. Among the many of the researches majority of them adopt relational databases as underlying systems because relational model which is used the most widely for managing large data efficiently. In this paper we develop XQuery to SQL Translation Algorithms called XSTAR that can efficiently handle XPath, XQuery FLWORs with nested iteration expressions, element constructors and keywords retrieval on relational database as well as constructing XML fragments from the transformed SQL results. The entire algorithms mentioned in XSTAR have been implemented as the XQuery processor engine in XML management system, XPERT, and we can test and confirm it's prototype from "http ://dblab.kmu.ac.kr/project.jsp".

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.178-185
• /
• 2020

This paper proposes precise time synchronization-based synchronized sampling structure applied HW/SW platform for LAN-based protection of future digital substations. The integrated software of the proposed platform includes IEC 61850 protocol, IEEE 1588 precision time protocol and synchronized sampling structure. The proposed platform expected to provide a basis of an application of future distributed sensing data-based protection and control methods by providing synchronized measurement among IEDs. The implementation of the proposed HW/SW platform technique was performed using TMDXIDK572 multi-core/multi-processor evaluation module and its time synchronization performance and synchronized sampling function were confirmed through the performance tests.