• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.4
• /
• pp.606-612
• /
• 2010

This study took advantage of NC processing technique in order to recreate design in development process of leisure boat based on the Korean boats and ships. CNC milling is an area which is concerned in automation process of boat production and needs sophisticated software, equipment and professionals to pilot it. The progress of manufacture begins when the surface model creation and simulation being done using CAD/CAM software. In this process, the needs such as 3D design, NC processing data, plug lamination and partition processing appear as detailed steps. The study completed these detailed steps and also the application example has been studied with presenting engineering potentialities.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.634-636
• /
• 2003

Satrec Initiative (Si) is developing a ground processing system for Synthetic Aperture Radar (SAR) data. SAR provides its own illumination and is not dependent on the light from sun, thus permitting continuous day/night operation and all-weather imaging. The system is capable of producing standard level products from SAR signal. Hence, the system should be able to perform matched filtering, range compression, azimuth compression, multi-look image generation, and geocoded image generation. This paper will describe the processing steps including algorithms, design, and accuracy of the Si's SAR processing system by comparing with commercial software.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.267-270
• /
• 2021

In order to diagnose a vehicle, it is achieved by collecting diagnostic data within the ECU or between ECUs and managing the diagnostic data by utilizing various communication methods through an electronic device composed of an ECU(Electronic Control Unit), which is an automotive electronic device. As communication methods, LIN, CAN, FlexRay are mainly used. Recently, wired/wireless communication is being used based on Ethernet. In order to perform vehicle diagnosis, it is necessary to know the diagnosis code generated by the ECU and to collect diagnosis data using diagnosis communication. In addition, diagnostic data can be managed from the ECU only when the application software required for vehicle diagnosis is configured. If many automobile manufacturers are manufacturing ECUs based on the AUTOSAR standard, which is an automotive electronic standard, the software structure is also configured to be applied according to the standard. In this paper, we understand the vehicle diagnosis communication method of the AUTUSAR standard, study the configuration and processing method of diagnosis data, and study the contents of software components, diagnosis communication, and diagnosis event processing.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.1 s.19
• /
• pp.19-26
• /
• 2002

To provide 3D GSIS data on the internet, 3D data structures need to be researched and applied for spatial analysis for subsurface modeling. As for GSIS software R&D trend the following things have pointed out : 3-dimensional geo-processing technologies, internet-based application system development, distributed processing technologies for large volume of spatial information, real-time geo-data processing methodologies, Among them research scope within Internet-based application system or Web-based GSIS generally contains core parts of software development such as Internet application, large volume of spatial database handling, real-time spatial data processing, spatial data transfer and transformation, and volumetric display of processing results. This study shows the method of providing 3D GSIS on the internet using VRML model, which are made of DEM data, draped aerial photo, and VRML script programming. And it is also studied that offering 3D GSIS engine on the internet and precise texture mapping using satellite image and aerial photos.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.540-543
• /
• 2017

It will be possible to solve some of the major issues in our society and economy with the emerging Big Data used across 21st century global digital economy. One of the main areas where big data can be quite useful is the medical and health area. IT technology is being used extensively in this area and expected to expand its application field further. However, there is still room for improvement in the usage of Big Data as it is difficult to search unstructured data contained in Big Data and collect statistics for them. This limits wider application of Big Data. Depending on data collection and analysis method, the results from a Big Data can be varied. Some of them could be positive or negative so that it is essential that Big Data should be handled adequately and appropriately adapting to a purpose. Therefore, a Big Data has been constructed in this study to applying Crawling technique for data mining and analyzed with R. Also, the data were visualized for easier recognition and this was effective in developing an individualized health plan from different angles.

• Bulletin of the Korean Space Science Society
• /
• 2000.04a
• /
• pp.34-34
• /
• 2000

No Abstract, See Full Text

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.96-101
• /
• 2001

The development of a new experimental method is required to easily observe the growth behavior of fatigue cracks. To satisfy the requirement, an image processing technique was introduced to fatigue testing. The length of surface fatigue crack could be successfully measured by the image processing system. At first, the image data of cracks were stored into the computer while the cyclic loading was interrupted. After testing, crack length was determined using image processing software which was developed by ourselves. Block matching method was applied to the detection of surface fatigue cracks. By comparing the data measured by image processing system with the data measured by manual measurement with a microscope, the effectiveness of the image processing system was established. If the proposed method is used to monitor and observe the crack growth behavior automatically, the time and efforts for fatigue test could be dramatically reduced.

• The KIPS Transactions:PartD
• /
• v.15D no.1
• /
• pp.87-98
• /
• 2008

In company with the demand of powerful processing units for embedded systems, the method to develop embedded software is also required to support the demand in new approach. In order to improve the resource utilization and system performance, software modeling techniques have to consider the features of hardware architecture. This paper proposes a partitioning technique of UML-based software models, which focus the generation of the allocatable software components into multiprocessor architecture. Our partitioning technique, at first, transforms UML models to CBCFGs(Constraint-Based Control Flow Graphs), and then slices the CBCFGs with consideration of parallelism and data dependency. We believe that our proposition gives practical applicability in the areas of platform specific modeling and performance estimation in model-driven embedded software development.

• Journal of Information Processing Systems
• /
• v.15 no.3
• /
• pp.520-537
• /
• 2019

This paper proposes a system that can detect the data leakage pattern using a convolutional neural network based on defining the behaviors of leaking data. In this case, the leakage detection scenario of data leakage is composed of the patterns of occurrence of security logs by administration and related patterns between the security logs that are analyzed by association relationship analysis. This proposed system then detects whether the data is leaked through the convolutional neural network using an insider malicious behavior graph. Since each graph is drawn according to the leakage detection scenario of a data leakage, the system can identify the criminal insider along with the source of malicious behavior according to the results of the convolutional neural network. The results of the performance experiment using a virtual scenario show that even if a new malicious pattern that has not been previously defined is inputted into the data leakage detection system, it is possible to determine whether the data has been leaked. In addition, as compared with other data leakage detection systems, it can be seen that the proposed system is able to detect data leakage more flexibly.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.10a
• /
• pp.743-746
• /
• 2001

멀티미디어 정보 중 비디오 데이터는 정보량이 많기 때문에 자동화된 비디오 영상 처리 기술이 필요하다. 시청자의 이해와 시청의 편의성을 제공하기 위하여 대부분 비디오에 자막을 삽입하게 된다. 외국 방송물 및 영화에 삽입된 다른 언어 자막을 편집 과정에서 자막으로 교환 할 필요성이 종종 있게 된다. 기존의 방법들은 자막 부분을 충분히 포함하는 일정 영역에 특정 색상을 채운 후 새로운 자막을 삽입하게 된다. 기존 방법의 문제점은 많은 영역에 대해 비디오 영상 정보를 손실 시킴으로써 시청자에게 시청의 불편을 초래하고 자막 교환의 비 효율성과 부 자연스러움을 발생시킨다. 본 논문에서는 기존 방법의 문제점을 극복하기 위하여 자막 영역을 원영상으로 복원한 후 다른 자막으로 교환하는 방법을 제안하고자 한다. 원영상 복원을 위하여 비디오 정보와 BMA(Block Matching Algorithm)를 이용한 원영상 복원 방법을 제안하고, 복원된 영역에 다른 자막으로 교환함으로써 효과적인 자막 교환 방법을 제안하고자 한다. 실험 결과 원영상 복원을 이용한 자막 교환 방법은 기존 방법에 비해 자연스럽고 효과적인 교환 방법임을 볼 수 있었다.