• Korean Journal of Clinical Pharmacy
• /
• v.25 no.4
• /
• pp.286-295
• /
• 2015

Objective: This experiment is to study how elderly group and their various lifestyles interact with health functional foods, according to their selection behavior. Different lifestyles will be observed closely, as well as how different health conditions and consumer involvements will affect critical decision making in selecting health functional foods. Method: Theories and discoveries from original advanced research were compared parallel to the new study. Results: First, cluster analysis and exploratory analysis were performed amongst different elder lifestyles. Lifestyle exploratory analysis was used for healthy, unique, leisure, and economical-style elders. Cluster analysis was used for material trend oriented, health oriented, complacent oriented-style elders. Health Functional Foods' selection trait Exploratory Factor Analysis showed that product's originality (function, uniqueness, specialty, compatibility, distributor, expiration date), quality (amount, daily dose, visual representation, accessibility, portability, natural ingredients), and popularity (product container, brand image, taste and smell, advertised product, domestic or import, well-known function) were the three main causes. Secondly, the amount of benefits for the elderly group health lifestyle were affected by 'Interest in health', 'Notability of the health functional food', and 'Functionality approved mark'. Specifically, the importance of, 'Interest in health', 'Notability of health functional food', and 'Functionality approved mark' were noticeably high within health oriented elders. Lastly, after examining the data from elder lifestyle's relationship with health functional food selection trait, all three different results showed equal importance. If you closely examine material trend oriented elderly group, selection trait showed distinctively high regards in 'Fundamental Attribute', 'Typical Attribute', and 'Cognitive Attribute'. Health oriented elders showed their distinctively high regards in 'Natural Attribute', and less consideration in 'Typical Attribute' and 'Cognitive Attribute'. Complacent oriented-style elderly group showed less focus on 'Fundamental Attribute', and even less in 'Typical Attribute', and 'Cognitive Attribute'. Health oriented elderly group concluded with above data from the fact that they showed most importance and involvement in health beneficial products that are scientifically proven. Material trend oriented elderly group showed balanced traits in their concluded data, showing that they prefer function, safety, as well as the brand image and their reputation. Also, they consider the products' outer elements, such as design and product name, in order to sense inner functions. Conclusion: So, Silver Business corporations must develop products to fulfill the market demands, and strategize marketing plans to better target the correct audience.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.9
• /
• pp.1101-1110
• /
• 2004

In the first quarter of 2004, there were about 1 billion 348 million mobile phone users worldwide with a penetration rate of only 29%. Korea ranks among the highest in the use of mobile communication, having over 36 million mobile phone subscribers with a mobile phone penetration rate of 75% as of May 2004. Since the introduction of wireless Internet service in May 1999, the number of subscribers rose to 34.5 million with 95.3% of the total mobile phone subscribers using wireless Internet services in May 2004, largely due to continued investments by telecommunication service providers, improvement of mobile handsets (color and digital camera phones) and implementation of policies on mobile number portability. In the Korean wireless Internet market, there are many user complaints since the service providers are competing with each other through TV commercial sales and phone discounts rather than improving their call quality, services and billing systems. therefore there is a growing need to improve the billing systems through means such as the implementation of reasonable payment plans according to consumer use, development of a wireless Internet billing system that can predict the number of users and establishment of pricing standards for controlled data (head, tail, etc...) as well as menu information by testing the texts. multimedia, video and other types of content provided by the three major mobile communication companies. The purpose of this study is to promote wireless Internet services and protect user rights by proposing a reasonable way to improve the billing systems for wireless Internet services after conducting a comparative analysis of file size and billing data of each of the service providers through a verification test on a packet billing system for wireless Internet services.

• The KIPS Transactions:PartC
• /
• v.13C no.2 s.105
• /
• pp.241-248
• /
• 2006

Mobile computing has such characteristics as portability, wireless network, mobility, etc. These characteristics cause various problems to mobile terminals like frequent disconnection, high error rate, and varying network status. These problems motivate us to develop an adaptive error control mechanism for supporting multimedia service in mobile computing environment. In this paper, we propose the Adaptive Error Control(AEC) scheme using client's buffer size and current error rate. After categorizing the status into four groups according to client's buffer size and current error rate, this scheme applies an appropriate error control scheme to each status. In this scheme, thresholds of buffer size and error rate are determined by the data transmission time, play rate and average VOP size, and by the probability of error for a sequence of packets. The performance of proposed scheme is evaluated by flaying MPEG-4 files on an experimental client/server environment, respectively. The results show that error correcting rate is similar to other schemes while the time for correcting error reduce a little. In addition, the size of data for correcting error is decreased by 23% compared with FEC and Hybrid FEC, respectively. Theses results demonstrate that the proposed scheme is more suitable in mobile computing environment with small bandwidth and varying environment than existing schemes.

• Science of Emotion and Sensibility
• /
• v.10 no.1
• /
• pp.87-98
• /
• 2007

The aim of this study is to grasp the features of the object which reveals its own specific purposes, and to apply them to the product concept and design forms when designers develop products. For this study, the subjects of the experiment were chosen to fill out a basic questionnaire, and an image analysis of them was performed. After the analysis, the functional design elements of the subjects were extracted and coded. They preyed the correlation between the results of the image analysis and the characteristics of the subjects. The questionnaire was carried out to determine the characteristics of the subjects. As the features of specific products were extracted through this experiment, they can be used as basic data to analyze consumer needs and to better understand the products when we design for them. This can be useful fundamental data enabling designers to understand products easily and to establish concepts for their designs. In the case of the MP3 player in this study, the results of the image analysis of it are turned out to be sound quality, compatibility, portability, employment, interface, and personality. Their respective related features were investigated as well. The important features of designing the MP3 player were presented. Through this fundamental study, it will be possible to understand consumer's needs more effectively, which will bring about the development of the fundamental basis of various fields in design.

• Food Science of Animal Resources
• /
• v.35 no.1
• /
• pp.143-148
• /
• 2015

Yogurt powder is fermented milk processed in the form of dry yogurt, and has advantages such as stability, storability, convenience, and portability. China and Vietnam are important export target countries because of the increased demand for dairy products. Therefore, we surveyed dairy product standardization in order to establish an export strategy. Lactic acid bacteria counts are unregulated in Korea and Vietnam. In China, lactic acid bacteria counts are regulated at $1{\times}10^6$ colonyforming units (CFU)/mL and detected at $6.24{\pm}0.33\;Log\;CFU/mL$. All three countries have regulated standards for total bacterial counts. In China, total bacterial counts of milk powder are regulated to n=5, c=2, m=50,000, M=200,000 and detected at $6.02{\pm}0.12\;Log\;CFU/mL$, exceeding the acceptable level. Lactic acid bacterial counts appeared to exceed total bacterial counts. Coliform group counts, Staphylococcus aureus, Listeria monocytogenes, and Salmonella species were not detected. Acidity is not regulated in Korea and Vietnam. In China, acidity was regulated to over $70^{\circ}T$ and detected $352.38{\pm}10.24^{\circ}T$. pH is unregulated in all three countries. pH was compared to that of general fermented milk, which is 4.2, and that of the sample was $4.28{\pm}0.01$. Aflatoxin levels are not regulated in Korea and China. In Vietnam, aflatoxin level is regulated at 0.05 ppb. Therefore, all ingredients of the yogurt powder met the safety standards. This data obtained in this study can be used as the basic data in assessing the export quality of yogurt powder.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11A
• /
• pp.1081-1091
• /
• 2005

Unlike conventional DVB-T transmission with the streaming method, DVB-H system based on the IPDC(IP Data Casting) method uses Time-slicing scheme to achieve the maximization of portability by reducing the power consumption of a receiver. To enhance the power efficiency of the receiver, Time-slicing scheme controls the receiver operation to perform only for corresponding burst in specific time slot. The additional power saving can also be achieved by reducing the required time for synchronization. In this paper, we propose a fast scattered pilot synchronization algorithm, which detects the pilot pattern of currently received OFDM symbol. The proposed scheme is based on the correlation between the adjacent subcarriers of potential scattered pilot position in two consecutively received OFDM symbols. Therefore, it can reduce the time for the scattered pilot synchronization within two symbols as com-pared with the conventional method used for DVB-T. And the proposed algorithm has better performance than the two schemes proposed by Nokia for DVB-H and the method using correlation with reference signal. Extensive com-puter simulation is performed based on ETSI EN300 744 ETSI and performance results show that the proposed algorithm has more efficient and stable operation than the conventional schemes.

• Nuclear Engineering and Technology
• /
• v.52 no.10
• /
• pp.2196-2203
• /
• 2020

A dryout mechanism model for rectangular narrow channels at high pressure conditions is developed by assuming that the Kelvin-Helmholtz instability triggered the occurrence of dryout. This model combines the advantages of theoretical analysis and empirical correlation. The unknown coefficients in the theoretical derivation are supported by the experimental data. Meanwhile, the decisive restriction of the experimental conditions on the applicability of the empirical correlation is avoided. The expression of vapor phase velocity at the time of dryout is derived, and the empirical correlation of liquid film thickness is introduced. Since the CHF value obtained from the liquid film thickness should be the same as the value obtained from the Kelvin-Helmholtz critical stability under the same condition, the convergent CHF value is obtained by iteratively calculating. Comparing with the experimental data under the pressure of 6.89-13.79 MPa, the average error of the model is -15.4% with the 95% confidence interval [-20.5%, -10.4%]. And the pressure has a decisive influence on the prediction accuracy of this model. Compared with the existing dryout code, the calculation speed of this model is faster, and the calculation accuracy is improved. This model, with great portability, could be applied to different objects and working conditions by changing the expression of the vapor phase velocity when the dryout phenomenon is triggered and the calculation formula of the liquid film.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.115-116
• /
• 2012

The demand for flexible electronic systems such as wearable computers, E-paper, and flexible displays has increased due to their advantages of excellent portability, conformal contact with curved surfaces, light weight, and human friendly interfaces over present rigid electronic systems. This seminar introduces three recent progresses that can extend the application of high performance flexible inorganic electronics. The first part of this seminar will introduce a RRAM with a one transistor-one memristor (1T-1M) arrays on flexible substrates. Flexible memory is an essential part of electronics for data processing, storage, and radio frequency (RF) communication and thus a key element to realize such flexible electronic systems. Although several emerging memory technologies, including resistive switching memory, have been proposed, the cell-to-cell interference issue has to be overcome for flexible and high performance nonvolatile memory applications. The cell-to-cell interference between neighbouring memory cells occurs due to leakage current paths through adjacent low resistance state cells and induces not only unnecessary power consumption but also a misreading problem, a fatal obstacle in memory operation. To fabricate a fully functional flexible memory and prevent these unwanted effects, we integrated high performance flexible single crystal silicon transistors with an amorphous titanium oxide (a-TiO2) based memristor to control the logic state of memory. The $8{\times}8$ NOR type 1T-1M RRAM demonstrated the first random access memory operation on flexible substrates by controlling each memory unit cell independently. The second part of the seminar will discuss the flexible GaN LED on LCP substrates for implantable biosensor. Inorganic III-V light emitting diodes (LEDs) have superior characteristics, such as long-term stability, high efficiency, and strong brightness compared to conventional incandescent lamps and OLED. However, due to the brittle property of bulk inorganic semiconductor materials, III-V LED limits its applications in the field of high performance flexible electronics. This seminar introduces the first flexible and implantable GaN LED on plastic substrates that is transferred from bulk GaN on Si substrates. The superb properties of the flexible GaN thin film in terms of its wide band gap and high efficiency enable the dramatic extension of not only consumer electronic applications but also the biosensing scale. The flexible white LEDs are demonstrated for the feasibility of using a white light source for future flexible BLU devices. Finally a water-resist and a biocompatible PTFE-coated flexible LED biosensor can detect PSA at a detection limit of 1 ng/mL. These results show that the nitride-based flexible LED can be used as the future flexible display technology and a type of implantable LED biosensor for a therapy tool. The final part of this seminar will introduce a highly efficient and printable BaTiO3 thin film nanogenerator on plastic substrates. Energy harvesting technologies converting external biomechanical energy sources (such as heart beat, blood flow, muscle stretching and animal movements) into electrical energy is recently a highly demanding issue in the materials science community. Herein, we describe procedure suitable for generating and printing a lead-free microstructured BaTiO3 thin film nanogenerator on plastic substrates to overcome limitations appeared in conventional flexible ferroelectric devices. Flexible BaTiO3 thin film nanogenerator was fabricated and the piezoelectric properties and mechanically stability of ferroelectric devices were characterized. From the results, we demonstrate the highly efficient and stable performance of BaTiO3 thin film nanogenerator.

• Journal of KIISE:Software and Applications
• /
• v.37 no.5
• /
• pp.341-353
• /
• 2010

Mobile Internet Device (MID) allows users to flexibly use various forms of wireless internet such as Wi-Fi, GSM, CDMA, and 3G. Using such Internet, MID users can utilize application services. MID usage is expected to grow due to the benefits of portability, Internet accessibility, and other convenience. However, it has resource constraints such as limited CPU power, small memory size, limited battery life, and small screen size. Consequently, MIDs are not capable to hold large-sized complex applications and to process a large amount of data in memory. An effective solution to remedy these limitations is to develop cloud services for the required application functionality, to deploy them on the server side, and to let MID users access the services through internet. A major concern on running cloud services for MIDs is the potential problems with low Quality of Service (QoS) due to the characteristics of MIDs. Even measuring the QoS of such services is more technically challenging than conventional quality measurements. In this paper, we first identify the characteristics of MIDs and cloud services for MIDs. Based on these observations, we derive a number of quality attributes and their metrics for measuring QoS of mobile services. A case study of applying the proposed quality model is presented to show its effectiveness and applicability.

• Journal of KIISE:Databases
• /
• v.34 no.2
• /
• pp.133-140
• /
• 2007

Flash memory has penetrated our life in various forms. For example, flash memory is important storage component of ubiquitous computing or mobile products such as cell phone, MP3 player, PDA, and portable storage kits. Behind of the wide acceptance as memory is many advantages of flash memory: for instances, low power consumption, nonvolatile, stability and portability. In addition to mentioned strengths, the recent development of gigabyte range capacity flash memory makes a careful prediction that the flash memory might replace some of storage area dominated by hard disks. In order to have overwriting function, one block must be erased before overwriting is performed. This difference results in the cost of reading, writing and erasing in flash memory[1][5][6]. Since this difference has not been considered in traditional buffer replacement technologies adopted in system software such as OS and DBMS, a new buffer replacement strategy becomes necessary. In this paper, a new buffer replacement strategy, reflecting difference I/O cost and applicable to flash memory, suggest and compares with other buffer replacement strategies using workloads as Zipfian distribution and real data.