Browse > Article
http://dx.doi.org/10.1016/j.net.2020.03.018

A dryout mechanism model for rectangular narrow channels at high pressure conditions  

Song, Gongle (School of Nuclear Science and Technology, Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University)
Liang, Yu (School of Nuclear Science and Technology, Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University)
Sun, Rulei (School of Nuclear Science and Technology, Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University)
Zhang, Dalin (School of Nuclear Science and Technology, Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University)
Deng, Jian (Science and Technology on Reactor System Design Technology Laboratory, Nuclear Power Institute of China)
Su, G.H. (School of Nuclear Science and Technology, Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University)
Tian, Wenxi (School of Nuclear Science and Technology, Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University)
Qiu, Suizheng (School of Nuclear Science and Technology, Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University)
Publication Information
Nuclear Engineering and Technology / v.52, no.10, 2020 , pp. 2196-2203 More about this Journal
Abstract
A dryout mechanism model for rectangular narrow channels at high pressure conditions is developed by assuming that the Kelvin-Helmholtz instability triggered the occurrence of dryout. This model combines the advantages of theoretical analysis and empirical correlation. The unknown coefficients in the theoretical derivation are supported by the experimental data. Meanwhile, the decisive restriction of the experimental conditions on the applicability of the empirical correlation is avoided. The expression of vapor phase velocity at the time of dryout is derived, and the empirical correlation of liquid film thickness is introduced. Since the CHF value obtained from the liquid film thickness should be the same as the value obtained from the Kelvin-Helmholtz critical stability under the same condition, the convergent CHF value is obtained by iteratively calculating. Comparing with the experimental data under the pressure of 6.89-13.79 MPa, the average error of the model is -15.4% with the 95% confidence interval [-20.5%, -10.4%]. And the pressure has a decisive influence on the prediction accuracy of this model. Compared with the existing dryout code, the calculation speed of this model is faster, and the calculation accuracy is improved. This model, with great portability, could be applied to different objects and working conditions by changing the expression of the vapor phase velocity when the dryout phenomenon is triggered and the calculation formula of the liquid film.
Keywords
Dryout; CHF; Kelvin-Helmholtz instability; Mechanism model; Rectangular narrow channels;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 J. Huang, Y. Huang, Q. Wang, et al., Numerical study on effect of gap width of narrow rectangular channel on critical heat flux enhancement, Nucl. Eng. Des. 239 (2) (2009) 320-326.   DOI
2 L. Li, D. Fang, D. Zhang, et al., Flow and heat transfer characteristics in platetype fuel channels after formation of blisters on fuel elements, Ann. Nucl. Energy 134 (2019) 284-298.   DOI
3 G.P. Celata, K. Mishima, G. Zummo, Critical heat flux prediction for saturated flow boiling of water in vertical tubes, Int. J. Heat Mass Tran. 44 (22) (2001) 4323-4331.   DOI
4 T. Okawa, A. Kotani, I. Kataoka, et al., Prediction of the critical heat flux in annular regime in various vertical channels, Nucl. Eng. Des. 229 (2-3) (2004) 223-236.   DOI
5 Y. Sudo, M. Kaminaga, Critical heat flux at high velocity channel flow with high subcooling, Nucl. Eng. Des. 187 (2) (1999) 215-227.   DOI
6 Y. Sudo, M. Kaminaga, A CHF characteristic for downward flow in a narrow vertical rectangular channel heated from both sides, Int. J. Multiphas. Flow 15 (5) (1989) 755-766.   DOI
7 Y. Sudo, M. Kaminaga, A new CHF correlation scheme proposed for vertical rectangular channels heated from both sides in nuclear research reactors, J. Heat Tran. 115 (2) (1993) 426-434.   DOI
8 Y. Sudo, Study on critical heat flux in rectangular channels heated from one or both sides at pressures ranging from 0.1 to 14 MPa, J. Heat Tran. 118 (3) (1996) 680-688.   DOI
9 D. Lu, X. Bai, Y. Huang, et al., Study on CHF in thin rectangular channels and evaluation of its empirical correlations, Chin. J. Nucl. Sci. Eng. 24 (3) (2004) 242-248.   DOI
10 H. Utsuno, F. Kaminaga, Prediction of liquid film dryout in two-phase annularmist flow in a uniformly heated narrow tube development of analytical method under BWR conditions, J. Nucl. Sci. Technol. 35 (9) (1998) 643-653.   DOI
11 W. Qu, I. Mudawar, Flow boiling heat transfer in two-phase micro-channel heat sinkseeII. Annular two-phase flow model, Int. J. Heat Mass Tran. 46 (15) (2003) 2773-2784.   DOI
12 T. Okawa, A. Kotani, I. Kataoka, et al., Prediction of the critical heat flux in annular regime in various vertical channels, Nucl. Eng. Des. 229 (2-3) (2004) 223-236.   DOI
13 G. Su, J. Gou, S. Qiu, et al., Theoretical calculation of annular upward flow in a narrow annuli with bilateral heating, Nucl. Eng. Des. 225 (2-3) (2003) 219-247.   DOI
14 F.A.N. Pu, Q.I.U. Sui-Zheng, J.I.A. Dou-Nan, An investigation of flow characteristics and critical heat flux in vertical upward round tube, Nucl. Sci. Tech. 17 (3) (2006) 170-176.   DOI
15 D.X. Du, W.X. Tian, G.H. Su, et al., Theoretical study on the characteristics of critical heat flux in vertical narrow rectangular channels, Appl. Therm. Eng. 36 (2012) 21-31.   DOI
16 G. Su, K. Fukuda, D. Jia, et al., Application of an artificial neural network in reactor thermohydraulic problem: prediction of critical heat flux, J. Nucl. Sci. Technol. 39 (5) (2002) 564-571.   DOI
17 Y.W. Wu, G.H. Su, S.Z. Qiu, et al., Experimental study on critical heat flux in bilaterally heated narrow annuli, Int. J. Multiphas. Flow 35 (11) (2009) 977-986.   DOI
18 R. Sun, G. Song, D. Zhang, et al., Experimental study of single-phase flow and heat transfer in rectangular channels under uniform and non-uniform heating, Exp. Therm. Fluid Sci. (2020) 110055.
19 G. Song, D. Zhang, G.H. Su, et al., Assessment of ECCMIX component in RELAP5 based on ECCS experiment, Nucl. Eng. Technol. 52 (1) (2019) 59-68.   DOI
20 G. Song, D. Zhang, Q. Liu, et al., RELAP5/MOD3. 4 calculation and model evaluation based on upper plenum entrainment experiment in AP1000, Ann. Nucl. Energy 138 (2020) 107143.   DOI
21 J.C. Sturgis, I. Mudawar, Critical heat flux in a long, rectangular channel subjected to one-sided heatingdI. Flow visualization, Int. J. Heat Mass Tran. 42 (10) (1999) 1835-1847.   DOI
22 F. Feind, Falling liquid films with countercurrent air flow in vertical tubes, VDI-Forschungscheft 481 (1960) 5-35.
23 K.C. Tu, C.H. Lee, S.J. Wang, et al., A new mechanistic critical heat flux model at low-pressure and low-flow conditions, Nucl. Technol. 124 (3) (1998) 243-254.   DOI
24 T. Funada, D.D. Joseph, Viscous potential flow analysis of KelvineHelmholtz instability in a channel, J. Fluid Mech. 445 (2001) 263-283.   DOI
25 K. Mishima, F. Tanaka, T. Hibiki, et al., Heat transfer study for thermalhydraulic design of the solid-target of spallation neutron source, J. Nucl. Sci. Technol. 38 (10) (2001) 832-843.   DOI
26 G.B. Wallis, J.E. Dodson, The onset of slugging in horizontal stratified air-water flow, Int. J. Multiphas. Flow 1 (1) (1973) 173-193.   DOI
27 H.S. Jacket, J.D. Roarty, J.E. Zerbe, Investigation of Burnout Heat Flux in Rectangular Channels at 2000 Psia, Westinghouse Electric Corp. Bettis Plant, Pittsburgh, 1956.
28 F.E. Tippets, Critical Heat Flux and Flow Pattern Characteristics of High Pressure Boiling Water in Forced Convection, General Electric Co. Atomic Power Equipment Dept., San Jose, Calif., 1962.