• 농업과학연구
• /
• 제31권2호
• /
• pp.149-160
• /
• 2004

This study had carried out an analysis of leaf tobacco production cost by cost items, growing stages, and farm sizes per 10a to provide the basic data for determination of the purchasing price of leaf tobacco by KT&G. Considering the survey results of 12 tobacco farm households, the composition rates of production cost by items revealed as 7-10% for land service, 5-22% for depreciation, 13-25% for material costs, 50-65% for labour cost respectively. The production cost of leaf tobacco by growing stages were shown as 15.3% in nursery bed period, 32.3% in main growing period in field, 30.8% in harvesting period and 21.6% in packing period. The magnitude of wage expenditure was appeared as harvesting stage, packing stage, growing stage on main field and nursery bed stage in order. The amount of material costs were revealed as the growing stage in main field, harvesting stage, nursery bed stage and packing stage respectively. The production costs of leaf tobacco per 10a by farm sizes were shown as 1,615,879won for small farm, 1,446,896won for medium farm and 1,454,408won for large farm respectively. The production cost of leaf tobacco had shown decreasing tendency according to increasing farm sizes. To promote the international market competitiveness of leaf tobacco producing farms, labour saving production technologies and cost effective farm size to decrease tobacco production cost should be developed.

• Nuclear Engineering and Technology
• /
• 제51권7호
• /
• pp.1729-1737
• /
• 2019

This paper presents neutronics design of VVER-1000 fuel assembly using burnable poison particles (BPPs) for controlling excess reactivity and pin-wise power distribution. The advantage of using BPPs is that the thermal conductivity of BPP-dispersed fuel pin could be improved. Numerical calculations have been conducted for optimizing the BPP parameters using the MVP code and the JENDL-3.3 data library. The results show that by using $Gd_2O_3$ particles with the diameter of $60{\mu}m$ and the packing fraction of 5%, the burnup reactivity curve and pin-wise power distribution are obtained approximately that of the reference design. To minimize power peaking factor (PPF), total BP amount has been distributed in a larger number of fuel rods. Optimization has been conducted for the number of BPP-dispersed rods, their distribution, BPP diameter and packing fraction. Two models of assembly consisting of 18 BPP-dispersed rods have been selected. The diameter of $300{\mu}m$ and the packing fraction of 3.33% were determined so that the burnup reactivity curve is approximate that of the reference one, while the PPF can be decreased from 1.167 to 1.105 and 1.113, respectively. Application of BPPs for compensating the reduction of soluble boron content to 50% and 0% is also investigated.

• 한국생활과학회지
• /
• 제15권4호
• /
• pp.659-667
• /
• 2006

The purpose of this study is to identify the combinated factors of leaf mustard kimchi which confer the highest utility on tourists, and to establish the relative factors of importance in terms of tourists' contribution to total utility to their tour purpose. Conjoint model, $X^2$ analysis, Max. Utility model, BTL model, Logit model, K-means cluster analysis, and one-way ANOVA analysis are used for this study. The findings from this study are as follows: First, the Pearson's R and Kendall's tau($\tau$) statistics shows that the model fits the data well to the tourists' visit purpose. Second, when they choose a sightseeing place, tourists' taste for food renowned in the local area is a very important factor. Third, the leaf mustard kimchi some tourists most prefer has light red color and mild taste, and they buy it in a shaped packing, at a cheap price and directly at the kimchi factory. The leaf mustard kimchi the other tourists most prefer has light red color and highly pungent taste, and they buy it in a shaped packing, at a cheap price and directly at the kimchi factory. Fourth, by the results of BTL model and Logit Model analysis, some tourists most prefer an experimental model of leaf mustard kimchi which has light red color and mild taste. They want to buy it in a shaped packing, at a cheap price and directly at the kimchi factory. The other tourists most prefer an experimental model of leaf mustard kimchi which has light red color and highly pungent taste. They want to buy it in a shaped packing, at a cheap price and directly in the kimchi factory. Finally, the writer hopes this study will provide the kimchi marketers with some insights into the types of popular leaf mustard kimchi designs that could be successfully developed.

• Design & Manufacturing
• /
• 제13권3호
• /
• pp.53-58
• /
• 2019

This paper presents Artificial Neural Network(ANN) method to predict maximum injection pressure of injection molding machine and weights of injection molding products. 5 hidden layers with 10 neurons is used in the ANN. The ANN was conducted with 5 Input parameters and 2 response data. The input parameters, i.e., melt temperature, mold temperature, fill time, packing pressure, and packing time were selected. The combination of the orthogonal array L27 data set and 23 randomly generated data set were applied in order to train and test for ANN. According to the experimental result, error of the ANN for weights was $0.49{\pm}0.23%$. In case of maximum injection pressure, error of the ANN was $1.40{\pm}1.19%$. This value showed that ANN can be successfully predict the injection pressure and the weights of injection molding products.

• 산업경영시스템학회지
• /
• 제43권1호
• /
• pp.26-33
• /
• 2020

The plastic waste problem is deepening all over the world. Plastic wastes have serious impacts on our lives as well as environ- mental pollution. The production and use of plastics increases every year, but once they are produced, they usually roam the earth for hundreds or thousands of years to pollute the environment. Although there is growing interest in plastic issues around the world and environmental regulations are being tightened, but no clear solution has yet been found. This study suggests Environmental degradation index (EDI). EDI can help raise consumers' attention to plastic wastes. In addition, EDI will contribute to reduce them in the future. As far as we know, this is the first study. We developed EDI for the confectionery packaging. This study defines four factors that may affect the environment of confectionery packaging: greenhouse gas emissions, energy consumption, methane emissions, and packaging space ratio. Then we quantify the value of each element and compute EDI as the sum of the four component values. In order to evaluate the feasibility of EDI proposed in this study, confectionery-packaging materials distributed in Korea were collected and analyzed. First, the types of confectionery are classified into pies, biscuits, and snacks and basic data was collected. Then the values of the four components were calculated using existing research data on the environment. We can use the proposed EDI to determine how much a product packing affects the environment.

• 한국정보통신학회논문지
• /
• 제14권7호
• /
• pp.1603-1609
• /
• 2010

본 논문은 해군 호위함급에 장착/운용되는 LAS(Line Array Sensor, 예인선배열센서)로부터 A, B, C그룹 수중음향 신호의 시리얼 데이터를 입력 받아 약속된 Protocol로 Packing하여, 고속 데이터통신과 Optic-fiber채널 장거리 전송이 가능한 SFM(Serial FPDP Module)을 통해 신호처리단으로 실시간 전송하는 센서데이터 입출력처리보드의 설계/제작 및 시험에 관해 언급한다. VME(Versa Module Eurocard) 6U크기의 한정된 보드 공간을 고려하여 Freescale사의 PowerPC계열인 MPC8265 CPU와, 기존 외장 FIFO등의 외부디바이스를 줄이고 자체 시뮬레이션 데이터생성 등을 위해 Altera사의 CycloneIII 계열 FPGA등을 사용하여 설계하고, 실시간 데이터 전송을 보장하며 각종 Device Driver, Peripheral Controller등의 Library를 제공하는 RTOS인 VxWorks를 Porting하여 소프트웨어를 개발하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.371-374
• /
• 2009

본 논문은 대한민국 해군의 차세대호위함인 FFX(Fast Frigate eXperimental)에 장착/운용되는 LAS(Line Array Sensor, 예인배열형센서)로부터 A,B,C 그룹 수중음향신호의 시리얼 데이터를 입력받아 약속된 Protocol로 Packing하여, 고속 데이터통신과 Optic-fiber채널 장거리 전송이 가능한 SFM(Serial FPDP Module)을 통해 신호처리단으로 실시간 전송하는 센서데이터입출력처리보드의 설계/제작 및 시험에 관해 논한다. VME 6U크기의 한정된 보드 공간을 고려하여 Freescale사의 PowerPC계열인 MPC8265 CPU와, FIFO등의 외부디바이스를 줄이고 자체시뮬레이션 데이터생성등을 위해 Altera사의 CycloneIII 계열 FPGA등을 사용하여 설계하고, 실시간 데이터 전송을 보장하며 각종 Device Driver, Peripheral Controller등의 Library를 제공하는 RTOS인 VxWorks를 Porting하여 소프트웨어를 개발하였다.

• Design & Manufacturing
• /
• 제9권1호
• /
• pp.14-17
• /
• 2015

In the data from synthetic resin makers, there is no shrinkage deviation through injection molding. But, after making the required products, even in the same conditions, there are some size-deviation in colors. Into our research, we checked main factor by the injection molding conditions. Our tests have shown this results, there are some shrinkage deviation in collors and, in the injection molding conditions, packing pressure is the main factor.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.757-762
• /
• 2001

CFT concrete has high flowing, high strength and resistance to material separation to use skyscraper structure. It is considered that concrete could fill the lower part of Diaphragm up. This kinds of CFT concrete hardly apply to building below 20 stories. Using the common use strength concrete to building below 20 stories brings to reduce construction cost. This concrete is needed that valid fluidity and packing ability with unit cement content as common use strength concrete. Offering a fundamental data and proportioning in CFT concrete of below 20 stories, it is executed basic property test, analysis of proportioning and mock up test.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1995년도 춘계학술대회논문집
• /
• pp.106-110
• /
• 1995

A local manufacturing companyin which low back pain(LBP) complaints were frequently reported was selected, and regularly perfomed lifting tasks were investigated using questionnaires and the 1991 NIOSH lifting guide. Among several processes of manufacture in the company, three processes-forming, heating and packing-were studied, where most of tasks were perfomed through manual materials handling (MMH). Questionnaire surveys showed that anthropometric data such as stature, weight and someatotype did not affect and weight of load influenced significantly the incidence of LBP, and workers who expwrienced LBP was older than the inexperienced. In addition, safety education conducted at the company was found to be ineffective in preventing LBP injuries. Lifting indexes(LI) was ranged from 0.86 to 17.0 with an average of 4.49, which revealed that tasks performing in the selected factory were in danger of LBP, and should be ertonomically redesigned. The critical factor reducing LI was found to be the horizontal component in all three processes, and most of weight of load was heavier than load constant(23kg) of the 1991 NIOSH lifting equation in heating process and packing.