• Journal of the Korean Society for Marine Environment & Energy
• /
• v.20 no.1
• /
• pp.18-25
• /
• 2017

Damage of both life and property has been increased by natural disaster under the influence of climate change, thus many natural disaster vulnerability researches have been carried out to make adaptation policy and impact assessment of climate change recently. Their method for assessing vulnerability usually have used proxy variables for making vulnerability indices. However, because their results were too qualitative and relative it tends to be hard to make absolute comparison and establish standard of prevention or adaptation ability. Accordingly, this study aimed at quantifying natural disaster vulnerability using emergy through recognizing disaster as the relations between order and disorder by system approach. As a result, ordering energy (4.66E+22 sej/yr) and ordered structure (1.98E+22 sej) of Busan in 2003 and disordering energy (7.80E+18 sej), disordered parts (4.55E+20 sej) and rebuilding energy (3.87E+20 sej) by typhoon Maemi were analysed. And then, this was compared with Hurricane Andrew in Dade County. Through this comparison, if the prevention ability of Busan increases, disordered parts can be reduced against the more powerful disordering energy. Also, prevention for additional damages by disaster is needed to practical rebuilding action. In conclusion, it was able to figure out the impact of disaster quantitatively by natural systems and urban systems showing as common measure. Based on this study and further research to make effective prevention for how much prevention ability should be increased will contribute to producing the scientific data for disaster management policy in future.

• Journal of the Korean Society for information Management
• /
• v.23 no.1 s.59
• /
• pp.121-138
• /
• 2006

This study attempts to derive an economic analysis model for journal evaluation and conducts a case analysis based on the model. Total costs are calculated and include administrative fees (such as binding, ordering, claiming, etc.) and subscription costs. The model quantifies qualitative benefits to users, a utility that combines usage data that has also been evaluated in the existing economic analysis models. The model is designed by the usage statistics of the web-based electronic journals, which have become important resources for research. Rankings are assigned based on how items are utilized to the goal of the mother institution. In the case study based on the KDI School Library, the highest ranking off was assigned to journals that patrons used for citation in their outputs. For journals that were used background information, i.e., full text downloading or browsing , each was assigned ranking of 2 and 1, respectively. According to the analysis, the top 20 journals provided 75% of the entire library utility, showing different user behaviors among different cohorts. We expect that the model makes it possible for librarians to measure the value of journals. It can provide a basic tool for journal selection, particularly in special libraries with custom needs.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.5
• /
• pp.507-514
• /
• 2015

In recent years, the number of construction projects carried out to repair and reinforce newly built structures and facilities has been on the rise compared to the number of new construction projects, accounting for more than 90 percents of all construction projects carried out by specialty construction companies. However, as some of the ordering parties fill out the required tasks incorrectly, the wrong information on construction bids is announced, and the specialty construction companies that hold a license and technology are unable to get the job at the right time. As such, it is critical to prevent unnecessary time and expense related to the correction of incorrect bid announcements by providing accurate information and definitions, because the tasks of each specialty construction work stipulated in the framework act of construction industry are vague. Therefore, the causes and problems were analyzed based on the correction cases of bid information, and a plan that can address the problem will be proposed. The result of this study can be utilized as fundamental data to achieve an institutional improvement in the bidding service for the specialty construction companies.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6D
• /
• pp.793-801
• /
• 2011

Existing specifications of road pavement require contractors to meet only materials and construction conditions regardless of pavement life. There are limitation of developing road pavement technology and possibility causing dispute between ordering organization and contractor with this type of specification. Research efforts to introduce performance warranty contracting are in progress in the field of road pavement to improve the problems. The performance warranty contracting gives the contractors opportunity to select materials and construction methods as they like. But they should satisfy a certain level of performance during a given period. The performance indicator and threshold value of pavement which are main elements of the warranty specification should be defined first to introduce the performance warranty contracting successfully. In this study, the performance indicator, threshold value, and warranty duration of asphalt pavement were investigated by reviewing literatures on performance warranty contracting of some states of the US. Major distresses influencing the performance of the asphalt pavement were investigated at 24 national expressway lines and national highway lines in 16 regions, and the data were analyzed to be compared to the cases of the US. Development of rational performance warranty specification for domestic asphalt pavement is expected based on the research results.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.260-260
• /
• 2013

Multiferroic materials have attracted much attention due to their fascinating fundamental physical properties and technological applications in magnetic/ferroelectric data-storage systems, quantum electromagnets, spintronics, and sensor devices. Among single-phase multiferroic materials, $BiFeO_3 $ is a typical multiferroic material with a room temperature magnetoelectric coupling in view of high magnetic-and ferroelectric-ordering temperatures (Neel temperature $T_N$~647 K and Curie temperature $T_C$~1,103 K). Rare-earth ion substitution at the Bi sties is very interesting, which induces suppressed volatility of Bi ion and improved ferroelectric properties. At the same time, Fe-site substitution with magnetic ions is also attracting, and the enhanced ferromagnetism was reported. In this study, $Bi_{1-x}Dy_xFe_{0.95}Co_{0.05}O_3$ (x=0, 0.05 and 0.1) bulk ceramic compounds were prepared by solid-state reaction and rapid sintering. High-purity $Bi_2O_3$, $Dy_2O_3$, $Fe_2O_3$ and $Co_3O_4$ powders with the stoichiometric proportions were mixed, and calcined at $500^{\circ}C$ or 24 h to produce $Bi_{1-x}Dy_xFe_{0.95}Co_{0.05}O_3$. The samples were immediately put into an oven, which was heated up to $800^{\circ}C$ nd sintered in air for 30 min. The crystalline structure of samples was investigated at room temperature by using a Rigaku Miniflex powder diffractometer. The field-dependent magnetization measurements were performed with a vibrating-sample magnetometer. The electric polarization was measured at room temperature by using a standard ferroelectric tester (RT66B, Radiant Technologies).

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.3
• /
• pp.87-101
• /
• 1990

The purpose of this study is to estimate the flood discharge and runoff volume at a stream by using geomorphologic parameters obtained from the topographic maps following the law of stream classification and ordering by Horton and Strahier. The present model is modified from Cheng' s model which derives the geomorphologic instantaneous unit hydrograph. The present model uses the results of Laplace transformation and convolution intergral of probability density function of the travel time at each state. The stream flow velocity parameters are determined as a function of the rainfall intensity, and the effective rainfall is calculated by the SCS method. The total direct runoff volume until the time to peak is estimated by assuming a triangular hydrograph. The model is used to estimate the time to peak, the flood discharge, and the direct runoff at Andong, Imha. Geomchon, and Sunsan basin in the Nakdong River system. The results of the model application are as follows : 1.For each basin, as the rainfall intensity doubles form 1 mm/h to 2 mm/h with the same rainfall duration of 1 hour, the hydrographs show that the runoff volume doubles while the duration of the base flow and the time to peak are the same. This aggrees with the theory of the unit hydrograph. 2.Comparisions of the model predicted and observed values show that small relative errors of 0.44-7.4% of the flood discharge, and 1 hour difference in time to peak except the Geomchon basin which shows 10.32% and 2 hours respectively. 3.When the rainfall intensity is small, the error of flood discharge estimated by using this model is relatively large. The reason of this might be because of introducing the flood velocity concept in the stream flow velocity. 4.Total direct runoff volume until the time to peak estimated by using this model has small relative error comparing with the observed data. 5.The sensitivity analysis of velocity parameters to flood discharge shows that the flood discharge is sensitive to the velocity coefficient while it is insensitive to the ratio of arrival time of moving portion to that of storage portion of a stream and to the ratio of arrival time of stream to that of overland flow.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.290-295
• /
• 2004

Along with social changes, school buildings are getting complex and diversified unlike the past. However, objective data analysis on construction costs fall short. In particular, ordering agencies are in a great need of objective and practical construction cost management for on-budget construction and procurement of quality goods. This paper analyzes the design diagram for a newly built school with an order from the Daejeon Metropolitan Office of Education, and compares the analysis with those of other kinds of buildings. The results are: the total construction cost of one school unit is 8,017,596,000 won on average; the cost is in the order of building, machinery and equipment, electricity, communications and civil engineering; as to activity, RC construction takes account of $30.3\%$ of the total construction cost. 1'he cost of school construction per M2 is 838,000 won, which is 6th highest of 11 kinds of constructions and slightly lower than 950,000 won, the average price of comparative constructions. When it comes to the percentage, school building takes mote percentage of the total cost than comparative building while machinery and equipment, electricity and communications takes slightly less percentage. Through simple regression analysis of gross coverage, this paper suggests a model formula with which the total construction cost, construction cost in accordance with activity, how much main construction materials are to be used are predictable.

• Culinary science and hospitality research
• /
• v.22 no.2
• /
• pp.206-221
• /
• 2016

This study presented the need to research into 'emotional response' and 'willingness to use apps', perceived by consumers using food delivery apps amidst the spread of smartphones and surge in use of food delivery apps. This study was also intended to present 'service quality' of food delivery apps, along with 'arousal' and 'pleasure' which represented the 2 types of emotional dimension of Pleasure-Arousal-Dominance(PAD), as variables that could strengthen the willingness to use food delivery apps and examine their roles. On the basis of results of such analysis, we intended to provide basic data necessary for development and operation of food delivery app contents. For subjects and spatial scope of this study, we selected domestic male and female residents nationwide who were aged 20 or older and had experience of using food delivery apps over the last 3 months. Among the subjects of this study, we surveyed foodservice consumers who had experienced of ordering food via food delivery apps such as Baedal Minjok, Yogiyo, and Baedaltong. Based on results of this study, it was found that design and sympathy related to food delivery app service quality had a positive effect on arousal while design and reliability had a positive effect on pleasure. Both informativity and mobility of food delivery app service quality were found to have a positive effect on the willingness to use apps. The pleasure from PAD had a positive effect on willingness to use apps, while arousal did not have any effect on willingness to use apps. The results of this study suggested that design and reliability, informativity, mobility were very important factors in inducing foodservice consumers to use food delivery apps continuously.

• Spatial Information Research
• /
• v.17 no.2
• /
• pp.201-212
• /
• 2009

As GIS analysis method began to be introduced in late 1980's, studies of land development applying the GIS also started to be proceeded in various fields. Since 2003, Land Suitability Assesment has been adopted in order to prevent national land from development thoughtless for the environment and to plan appropriate national land management in terms of green development. Land Suitability Assessment System II based on diverse GIS analysis method such as Contour Analysis, Overlay Analysis, Network Analysis was particularly adopted to draft plans of specifying and altering of exclusionary zoning as well as installing and maintaining of urban planning facilities. But there has been a lot of problem, like an inaccurate basic data and assessment indicators, unmatched threshold, and contradicted evaluation result between each evaluating systems. Even though it is suited to an evaluation criteria, grade distribution is applied to start at 20, and development-centered evaluation result is offered. Now, we observed how suitability values and grading were changed, ordering to change grade distribution system from $20{\sim}100$ to $0{\sim}100$. In result, it showed changes of grades in some parcels. And in case of suitability values, 87% of parcels decreased to minimum 1 point, maximum 70 points. It means that changing grade distribution system of assessment system II doesn't have only influence on suitability values and grading but it is also an empirical analysis because of considering both development and maintenance.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.1
• /
• pp.97-107
• /
• 2002

In this paper, we propose the realization of on-line handwritten Chinese character recognition for mobile personal digital assistants (PDA). We focus on the development of an algorithm having a high recognition performance under the restriction that PDA requires small memory storage and less computational complexity in comparison with PC. Therefore, we use index matching method having computational advantage for fast recognition and we suggest a unit reconstruction method to minimize the memory size to store the character models and to accomodate the various changes in stroke order and stroke number of each person in handwriting Chinese characters. We set up standard model consisting of 1800 characters using a set of pre-defined units. Input data are measured by similarity among candidate characters selected on the basis of stroke numbers and region features after preprocessing and feature extracting. We consider 1800 Chinese characters adopted in the middle and high school in Korea. We take character sets of five person, written in printed style, irrespective of stroke ordering and stroke numbers. As experimental results, we obtained an average recognition time of 0.16 second per character and the successful recognition rate of 94.3% with MIPS R4000 CPU in PDA.