• 전기전자학회논문지
• /
• 제14권4호
• /
• pp.297-304
• /
• 2010

This paper presents a link layer design of DisplayPort interface with a state machine based on packet processing. The DisplayPort link layer provides isochronous video/audio transport service, link service, and device service. The merged video, audio main link, and AUX channel controller are implemented with 7,648 LUTs(Loop Up Tables), 6020 register, and 821,760 of block memory bits synthesized using a FPGA board and it operates at 203.32MHz.

• International Journal of Internet, Broadcasting and Communication
• /
• 제8권2호
• /
• pp.66-74
• /
• 2016

In this study, we have discussed and illustrated the security issues of WiMAX technology including vulnerabilities, threats and some security solution. Both physical layer and data link layer have been considered. Jamming is a major threat in physical layer, and in data link layer we study an authentication problem and see the problem of some unencrypted messages leading to lack of confidentiality. Some of these vulnerabilities have been solved in the recent amendment of 802.16 and some still remain. Moreover WiMax is a new technology yet.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.337-341
• /
• 1991

Fieldbus is a low level serial digital network which will be used for factory automation. This paper describes lower layer implementation of a Fieldbus network interface. Physical layer provides hardware interface between IBM-PC and Fieldbus. Also, physical layer uses manchester coding, shielded twisted pair lines and RS-485 electrical standard. Data link layer includes Intel's iDCX96 real time executive for 8797 one chip microcontroller and Fieldbus data link protocol software.

• Journal of information and communication convergence engineering
• /
• 제10권3호
• /
• pp.248-252
• /
• 2012

The sensor network standard DASH7 was proposed to improve transmission quality and low power communication. Specifications for the standard are currently being developed, so the security specification has not been firmly implemented. However, without a security specification, a network cannot work due to threats from malicious users. Thus we must ensure confidentiality and authentication of data packets by using a cryptography method. To contribute to the DASH7 security specification, this paper shows the implementation results of network and data link layer security by using advanced encryption standard (AES) counter with CBC-MAC (CCM) over CC430 sensor nodes.

• 전기학회논문지
• /
• 제57권6호
• /
• pp.1063-1068
• /
• 2008

BACnet(Building Automation and Control Networks) is a standard data communication protocol specifically designed for building automation and control systems, BACnet provides six options for data link layer protocols and these six data link layer options can be applied with various wired transmission media. Recently wireless technology prevails in automation area. ZigBee is an IEEE 802.15.4 based standard communication protocol for low-rate wireless personal area networks. In this study, we propose a BACnet over ZigBee model that adopts ZigBee communication channel as a wireless data link layer protocol in a BACnet-based communication network system. The technology proposed in this paper can expand the BACnet application using the advantages of wired and wireless integrated network solution.

• 한국멀티미디어학회논문지
• /
• 제18권2호
• /
• pp.168-177
• /
• 2015

To increase the overall utility and decrease the link delay and power consumption, a joint optimal cross-layer design of congestion control at the transport layer, link delay at the data link layer and power allocation at the physical layer for mobile ad hoc networks is considered in this paper. As opposed to previous work, the rate outage probability in this work is based on exactly closed-form; therefore, the proposed method can guarantee the globally optimal solutions to the underlying problem. The non-convex formulated problem is transformed into a convex one, which is solved by exploiting the duality technique. Finally, simulation results verify that our proposal achieves considerable benefits over the existing method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.93-93
• /
• 2000

In this study, physical and data link layer protocols of FOUNDATION Fieldbus are implemented. INTEL386EX and 80196KC are used fer the CPU of PC interface board and sensor interface module, respectively The physical layer protocol of FOUNDATION Fieldbus is developed by using FB3050 chip, the fieldbus communication controller ASIC. The data Link layer protocol of FOUNDATION Fieldbus is implemented by software.

• 제어로봇시스템학회논문지
• /
• 제10권11호
• /
• pp.1058-1064
• /
• 2004

This paper presents a distributed precedence queue mechanism to resolve unexpected transmission delay of a lower priority transaction in a CAN based system, which keeps a fixed priority in data transaction. The mechanism is implemented in the upper sub-layer of the data link layer(DLL), which is fully compatible with the original medium access control layer protocol of CAN. Thus the mechanism can be implemented dynamically while the data transactions are going on without any hardware modification. The CAN protocol was originally developed to be used in the automotive industry, and it was recently applied for a broader class of automated factories. Even though CAN is able to satisfy most of real-time requirements found in automated environments, it is not to enforce either a fair subdivision of the network bandwidth among the stations or a satisfactory distribution of the access delays in message transmission. The proposed solution provides a superset of the CAN logical link layer control, which can coexist with the older CAN applications. Through the real experiments, effectiveness of the proposed mechanism is verified.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.761-766
• /
• 2005

This paper presents a dynamic precedence queue mechanism to resolve unexpected transmission delay of a lower priority transaction in a CAN based system which keeps a fixed priority in data transactions. The mechanism is implemented in the upper sub-layer of the data link layer (DLL), which is fully compatible with the original medium access control layer protocol of CAN. Thus the mechanism can be implemented dynamically while the data transactions are going on without any hardware modification. The CAN protocol was originally developed to be used in the automotive industry and it was recently applied for a broader class of automated factories. Even though CAN is able to satisfy most of real-time requirements found in automated environments, it is not to enforce either a fair subdivision of the network bandwidth among the stations or a satisfactory distribution of the access delays in message transmissions. The proposed solution provides a superset of the CAN logical link layer control, which can coexist with the older CAN applications. Through the real experiments, effectiveness of the proposed mechanism is verified.

• 전자공학회논문지CI
• /
• 제41권5호
• /
• pp.9-16
• /
• 2004

PCI 익스프레스 디바이스의 데이터 연결 계층은 전송할 패킷을 저장하고 있는 송신 버퍼와 전송하였지만 아직 타겟 디바이스로부터 승인 받지 못한 패킷을 저장하고 있는 재전송 버퍼를 가지고 있어야 한다. 이렇게 전송 버퍼와 재전송 버퍼를 구분하여 구현할 경우 전송할 패킷이 전송 버퍼에 있다 하더라도 재전송 버퍼에 여유 공간이 없다면 더 이상 패킷을 전송 할 수 없다는 단점이 있다. 본 논문에서는 한 개의 버퍼로 전송 버퍼와 재전송 버퍼를 구현하는 방법을 제안한다. 제안된 버퍼 구조에서는 필요에 따라 버퍼의 공간을 유연하게 사용할 수 있기 때문에 버퍼 사용 및 데이터 전송 효율을 향상시킬 수 있다. 모의 실험 결과 버퍼의 전체 크기가 8K 바이트일 경우 제안된 방법이 버퍼를 분리하여 사용하는 방법에 비해 데이터 전송 효율이 평균 39% 향상되었다.