• 상하수도학회지
• /
• 제10권2호
• /
• pp.55-69
• /
• 1996

Backwashing is one of the most important processes in water treatment. Several models have been utilized to predict minimum fluidization velocity and expansion of media. However, it is not unusual that the actual bahavior of media dose not agree well with the prediction. This study has investigated the applicability of models in predicting the minimum fluidization velocity of sand media. However even the better model has predicted minimum fluidization velocity 1.1 to 1.8 times higher than actual fluidization velocity. The expansion rate of sand media was inspected. It is found that the actual expansion rate was greater than the predicted. In this study condition, use of $d_{10}$ instead of $d_{60}$ was better to predict the expansion of media. On the contrary to the sand media, the actual expansion of anthracite media was less than that predicted. Sometimes it is reported that the dual media has been overflown during backwashing and mixed severely at the interface. It is because the grain size distribution of anthracite has not been selected properly. The numerical values for media expansion found in this study could be referred as the useful data in operating and/or designing filter media.

• 유통과학연구
• /
• 제13권7호
• /
• pp.53-61
• /
• 2015

Purpose - This research analyzes overseas expansion support systems for small- and medium-sized enterprises in Germany and Japan. Germany and Japan have developed overseas expansion support policies for such enterprises. The study then explores the implications for Korea and its local governments. Research design, data, and methodology - We did a comparative analysis of Japan and Germany and their support for overseas expansion of small and medium companies. Data were mainly collected from the Ministry of Economy, Trade and Industry (Japan) and the Germany Trade and Invest (Germany) agency through statistics and literature surveys, and analysis studies. Results - First, human resources cultivation and funding support policies, which both Germany and Japan use as part of small- and medium-sized enterprise policies, should be modified to Korean circumstances and to reflect its own small- and medium-sized enterprise support needs. Second, both the German policies that support overseas expansion of small- and medium-sized enterprises and those of Japan's include the philosophy and methods that put an emphasis on these enterprises, despite the fact that there are big differences in the overseas policies in these two countries. Third, German and Japanese governments are embracing the idea that small- and medium-sized enterprises are key to their national economies and implementing policies based on the ratio occupied by these enterprises in the domestic consumption or GDP. In other words, Germany and Japan consider small- and medium-sized enterprises as central to their nation's industry, and assess them as economic industry that should definitely exist for the continued survival of big businesses, and not just as merely supplemental to big business. Fourth, whereas Germany emphasizes support to product exhibition in its overseas expansion support policies, Japan is providing integrated support containing foreign direct investment to small- and medium-sized enterprises. Fifth, there are differences in the overseas expansion support in Germany and Japan in terms of their support to big business. Whereas Germany considers support to big business unnecessary, Japan is implementing active support policies to areas corresponding to big business. Korea will have to benchmark the policies of Germany and Japan, and decide whether or not to give full support to small- and medium-sized enterprises, while excluding areas supporting big business. Conclusions - Based on this analysis of German and Japanese overseas expansion support policies, we need to choose the policies that will engender a solid outcome and derive modified policies for the circumstances of Korea. Additionally, we can use the comparison of the overseas support policies of Japan and Germany to choose small- and medium-sized enterprise overseas expansion support policies for Korea. However, we cannot provide specific overseas support policies by industry. This point will be referenced as a limitation of this study. In future research, we expect that some researchers will take an empirical approach to exploring Korean overseas expansion support through collecting cases of overseas support policies and interviewing policy authorities.

• 토지주택연구
• /
• 제2권3호
• /
• pp.259-268
• /
• 2011

Space extension and the increase of the number of households are helpful to raise business value of the remodeling through the renovation of apartment houses that is required by residents of new cities and large-scaled apartment. However, in the case of accepting this demand, it could have a bad influence on the landscape of a complex in terms of the structure of apartment houses and the safety of construction and urban planning, and a problem occurs in the aspect of fairness for reconstruction. For the study, the current status related to the remodeling system through laws, related articles since 2000 and research data was analyzed. In addition, the individual quantitative analysis was conducted in the four aspects to judge whether households expansion for remodeling is plausible:1) Statistical data to comprehend the changes of population and social structure 2) Survey data of floor space index and the building-to-land ratio of new cities at the intial stage for the review of the effect of architectural planning and urban environment 3) Surveys of experts on structural safety in order to judge whether the demand of expansion is accepted or not. 4) Quantitative analysis of each item to compare fairness with reconstruction. Therefore, this study is intended to understand problems of the remodeling system that is currently operated. Moreover, it will be further reviewed that the expansion of households is feasible through the permission of expansion and it will be discussed that the revitalization of the apartment remodeling has a positive impact on the residential environment.

• 응용통계연구
• /
• 제10권1호
• /
• pp.137-149
• /
• 1997

본 논문에서는 푸리에 전개에 기초한 로그밀도추정법을 제안하였다. 삼각함수로 구성된 기저함수들은 베이즈정보 규준량에 근거하여 단계적 추가 및 삭제를 이용하여 결정하였고, 모수의 추정에는 최대가능성 방법을 이용하였다. 기존 자료의 분석 및 모의실험을 통하여 제안된 방법의 성능을 예시하였다.

• Translational and Clinical Pharmacology
• /
• 제26권4호
• /
• pp.155-159
• /
• 2018

For regulatory approval of a new drug, the most preferred and reliable source of evidence would be randomized controlled trials (RCT). However, a great number of drugs, being developed as well as already marketed and being used, usually lack proper indications for children. It is imperative to develop properly evaluated drugs for children. And expanding the use of already approved drugs for other indications will benefit patients and the society. Nevertheless, to get an approval for expansion of indications, most often with off-label experiences, for drugs that have been approved or for the development of pediatric indications, either during or after completing the main drug development, conducting RCTs may not be the only, if not right, way to take. Extrapolation strategies and modelling & simulation for pediatric drug development are paving the road to the better approval scheme. Making the use of data sources other than RCT such as EHR and claims data in ways that improve the efficiency and validity of the results (e.g., randomized pragmatic trial and randomized registry trial) has been the topic of great interest all around the world. Regulatory authorities should adopt new methodologies for regulatory approval processes to adapt to the changes brought by increasing availability of big and real world data utilizing new tools of technological advancement.

• 한국압력기기공학회 논문집
• /
• 제19권1호
• /
• pp.27-35
• /
• 2023

Pressure tubes are the main components of PHWR core and serve as the pressure boundary of the primary heat transport system. However, because pressure tubes have changed their geometrical dimensions under the severe operating conditions of high temperature, high pressure and neutron irradiation according to the increase of operation time, all dimensional changes should be predicted to ensure that dimensions remain within the allowable design ranges during the operation. Among the deformations, the diameter expansion due to creep leads to the increase of bypass flow which may not contribute to the fuel cooling, the decrease of critical channel power and finally the deration of the power to maintain the operational safety margin. This study is focused on the modeling of the expansion of the pressure tube diameter based on the operating conditions and measured diameter data. The pressure tube diameter expansion was modeled using the neutron flux and temperature distributions of each fuel channel and each fuel bundle as well as the measured diameter data. Although the basic concept of the current modeling approach is simple, the diameter prediction results using the developed methodology showed very good agreement with the real data, compared to the existing methodology.

• 소음진동
• /
• 제8권4호
• /
• pp.654-662
• /
• 1998

To predict the radiating noise from the vibrating surface, it is required to know the velocity distribution of vibrating surface exactly as possible as it can. Although it can be obtained by finite element method, their accuracy is limited by theuncertainty of preparing input data such as material propoerties, damping, excitation, and the actual boundary conditions. Experimental values are accurate but are seldom available as many asthe data points compared to FEM mesh. Therefore, hybrid method of experiment and finite element method, called modal expansion technique, is investigated for the preparatin of accurate element method at specified frequencies and for the verification of this scheme, related experiment is performed. In high frequency range above 2000 Hz, piezo-electric material is used as an actuator.

• Journal of the Korean Data and Information Science Society
• /
• 제25권2호
• /
• pp.431-438
• /
• 2014

Type I hybrid censoring scheme is the combination of the Type I and Type II censoring scheme introduced by Epstein (1954). Epstein considered a hybrid censoring sampling scheme in which the life testing experiment is terminated at a random time $T^*$ which is the time that happens rst among the following two; time of the kth unit is observed or time of the experiment length set in advance. The likelihood function of this scheme from the Rayleigh distribution cannot be solved in a explicit solution and thus we approximate the function by the Taylor series expansion. In this process, we propose four dierent methods of expansion skill.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.161-166
• /
• 2004

Seoul has experienced a rapid urban expansion over the past three decades. This paper reports an investigation into the application of Landsat imagery for detecting urban growth and assessing its impact on surface temperature in the region. Land cover/use change detection w3s carried out by using Landsat data. The results revealed a notable urban growth in the study area. This urban expansion had raised surface radiant temperature in the urbanized area. The method using remote sensing data based on GIS was found to be effective in monitoring and analysing urban growth and in evaluating urbanization impact on surface temperature.

• 설비공학논문집
• /
• 제23권4호
• /
• pp.251-258
• /
• 2011

The objective of this study is to propose two empirical correlations to predict the mass flow rate through an automotive block type thermostatic expansion valve and then to evaluate the correlations. The first correlation is deduced by modifying the basic equation of the orifice meter for the mass flow rate and the second correlation is deduced by using the Buckingham's ${\pi}$ theorem. The first correlation showed very good agreement on the measured data for R134a, given by Monforte. Average relative deviation and standard deviation of it are 2.5% and 1.6%, respectively. The second correlation agreed on the same measured data with a little greater deviations. The two correlations may apply to common expansion valves which have different geometrical sizes of the same shape.