• Journal of Korean Institute of Architectural Sustainable Environment and Building Systems
• /
• v.12 no.6
• /
• pp.606-617
• /
• 2018

Increased density of racks has resulted in increased use of data center cooling energy and the needs for energy efficient cooling systems has increased. In response to these needs, ASHRAE presented a performance indicator, which is Mechanical Load Component (MLC), for the purpose of evaluating systems at the design stage. However, the MLC metrics presented in the current standard can only be determined for system compliance and compared alternative systems with the system configuration completed. Therefore, there are limitations to considering MLC from the early stages of design. In this study, to extend the scope of application of MLC in the design phase, the design factors of the main equipment comprising the cooling system are classified by the MLC load component and interrelations between design factors were identified.

• The Korean Journal of Applied Statistics
• /
• v.8 no.1
• /
• pp.51-60
• /
• 1995

Given an $n \times p$ data matrix, if we add the $p_s$ variables somewhat different nature than the p variables to this matrix, we have a new $n \times (p+p_s)$ data matrix. Because of these $p_s$ variables, the traditional principal component analysis can't provide its efficient results. In this study, to improve this problem we review the supplementary principal component analysis putting $p_s$ variables to supplementary variable. This technique is based on the algebraic and geometric aspects of the traditional principal component analysis. So we provide a type of statistical data analysis for the records of eight teams and fourteen fields of the 1982-1992 Korean Pro Baseball Data based on the supplementary principal component analysis and the traditional principal component analysis. And we compare the their results.

• International Journal of Reliability and Applications
• /
• v.7 no.1
• /
• pp.41-53
• /
• 2006

The exact cause of the system's failure is often unknown in the masked system lifetime data. In such type of data, there are two observable quantities, namely (i) the systems time to failure and (ii) the set of systems components that contains the component, which might cause the system to fail. Our objective in this paper is to use the maximum likelihood procedure in the presence of masked data to make inference for the reliability of the system's components. We assume a multi-component series system where each component has a constant failure rate. Different cases that permit for closed form solutions of point estimates are considered. The results obtained in this paper generalize other published results.

• The Korean Journal of Applied Statistics
• /
• v.34 no.2
• /
• pp.127-139
• /
• 2021

Independent Component Analysis is a popular statistical method to separate independent signals from the mixed data, and Group Independent Component Analysis is an its multi-subject extension of Independent Component Analysis. It has been applied Functional Magnetic Resonance Imaging data and provides promising results. However, classical Group Independent Component Analysis works poorly when outliers exist on data which is frequently occurred in Magnetic Resonance Imaging scanning. In this study, we propose a robust version of the Group Independent Component Analysis based on ROBPCA. Through the numerical studies, we compare proposed method to the conventional method, and verify the robustness of the proposed method.

• Journal of KIISE:Software and Applications
• /
• v.36 no.5
• /
• pp.386-395
• /
• 2009

Business entities with which most service components interact are kind of cross-cutting concerns in a multi-layered distributed application architecture. When business entities are modified, service components related to them should also be modified, even though they implement common functions of the application framework. This paper proposes what we call DTT (Data Type-Tolerant) component model to process the variability of business entities, or externalized data, which feature modern application architectures. The DTT component model expresses the data variability of product lines at the implementation level by means of SCDTs (Self-Contained Data Types) and variation point interfaces. The model improves the efficiency of application engineering through data type converters which support type conversion between SCDTs and business entities of particular applications. The value of this model lies in that data and functions are coupled locally in each component again by allowing service components to deal with SCDTs only instead of externalized business eutities.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.2
• /
• pp.45-52
• /
• 2002

Load modeling is classified into two methods according to approaching method, so called the measurement and component-based method. The measurement method is to model the load characteristics measured directly at substations and feeders. But it is difficult to measure continuously load characteristics from naturally occurring. system variation. The component-based method consists of the fellowing process; component load modeling, composition rate estimation and aggregation of component loads, etc. In this paper, the characteristic experiment of component loads was performed to obtain data for the component load modeling as the component-based method. At first, representative component loads were selected by the proposed method considering the accuracy of load modeling and the performance possibility of component load experiment in the laboratory. Also an algorithm was Proposed to identify the reliability of data obtained from the component load characteristic experiments. In addition, the results were presented as the case studies.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.3
• /
• pp.222-229
• /
• 2016

Linked Data is a powerful technology for storing and publishing the structures of data. It is helpful for web applications because of its usefulness through semantic query data. However, using Linked Data is not easy for ordinary users who lack knowledge about the structure of data or the query syntax of Linked Data. For that problem, we propose a translator component that is used for translating RESTful/JSON request messages into SPARQL commands based on ontology - a metadata that describes the structure of data. Clients do not need to worry about the structure of stored data or SPARQL, a kind of query language used for querying linked data that not many people know, when they insert a new instance or query for all instances of any specific class with those complex structure data. In addition, the translator component has the search function that can find a set of data from multiple classes based on finding the shortest paths between the target classes - the original set that user provide, and target classes- the users want to get. This translator component will be applied for any dynamic ontological structure as well as automatically generate a SPARQL command based on users' request message.

• Proceedings of the CALSEC Conference
• /
• 2001.08a
• /
• pp.671-679
• /
• 2001

사례연구를 통하여 UML Component Design Process의 일관성 및 정확성을 검증한다. Business Concept Model과 Use Case Model을 이용하여 Component Specification Process의 산출물인 Interface, Component Specification 및 Component Architecture 작성 UML Notation을 확장해서 Component 명세에 적용하는 것이 올바른 것인지 확인한다. <>,<>,<>,<>,<>, <>:로 Component Specification이 충분한지를 확인 OCL을 이용하여 Component Specification 중 Component Specification, Interface Specification, Operation Specification, Constraint, Pre/Post Condition의 정의에 유용한지 확인(중략)

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.11
• /
• pp.1074-1081
• /
• 2011

As robotics systems are becoming more complex there is the need to promote component based robot development, where systems can be constructed as the composition and integration of reusable building block. One of the most important challenges facing component based robot development is safeguarding against software component failures and malfunctions. The health monitoring of the robot software is most fundamental factors not only to manage system at runtime but also to analysis information of software component in design phase of the robot application. And also as a lot of monitoring events are occurred during the execution of the robot software components, a simple data treatment and efficient memory management method is required. In this paper, we propose an efficient events monitoring and data management method by modeling robot software component and monitoring factors based on robot software framework. The monitoring factors, such as component execution runtime exception, Input/Output data, execution time, checkpoint-rollback are deduced and the detail monitoring events are defined. Furthermore, we define event record and monitor record pool suitable for robot software components and propose a efficient data management method. To verify the effectiveness and usefulness of the proposed approach, a monitoring module and user interface has been implemented using OPRoS robot software framework. The proposed monitoring module can be used as monitoring tool to analysis the software components in robot design phase and plugged into self-healing system to monitor the system health status at runtime in robot systems.

• Journal of the Korean Data and Information Science Society
• /
• v.14 no.3
• /
• pp.623-630
• /
• 2003

Recently, Tanaka(1988) derived two influence functions related to an eigenvalue problem $(A-\lambda_sI)\upsilon_s=0$ of real symmetric matrix A and used them for sensitivity analysis in principal component analysis. In this paper, we deal with the perturbation expansions up to quadratic terms of the same functions and discuss the application to sensitivity analysis in principal component regression analysis(PCRA). Numerical example is given to show how the approximation improves with the quadratic term.