• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.5
• /
• pp.27-34
• /
• 2014

This paper presents a collision avoidance scheme for wireless sensor networks that use a GTS-based channel allocation scheme. Many sensor nodes can share a GTS channel for sending their data to the sink node. When a node tries to send a frame at a shared GTS channel, a collision can be occurred when there is a node that uses the same backoff number. For decreasing a wireless collision, the parent assigns a backoff number when a child node registers to it. Further, when a collision occurs during a data transfer, the parent node reassigns a new backoff number for the child node. Simulation results show that there is a decreased collision number with suggested parent-controlled collision avoidance scheme by effectively controlling the backoff number of the child.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.3
• /
• pp.7-12
• /
• 2018

The Korean New Car Assessment Program (KNCAP) is a program to evaluate the safety of automobiles. In the safety assessment method, there are frontal collision, partial frontal collision, side collision, pillar collision, and left stability in the collision safety category. Among them, Korean in-depth analysis data shows that there are a lot of side collision accidents and it is necessary to protect them. This study will analyze the side collision accident that occurred in actual traffic accident based on Korea In-Depth Accident Study (KIDAS) and investigate the effect of center airbag on passenger in under side collision. In addition, with simulated side collision scenarios in the various side impact directions, it was investigated how the center airbag affects the driver and passenger in terms of kinematic and injury levels.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.3
• /
• pp.254-262
• /
• 2015

This paper presents 3D collision deformation modelling methodologies using photogrammetry for reconstruction of vehicle accidents. A vehicle's deformation shape in collision provides important information on how the vehicle collided. So effective measurement(scanning) and construction of a corresponding appropriate model are essential in the analysis of collision deformation shape for obtaining much information related to collision accident. Two measurement methods were used in this study: Indirect-photogrammetry which requires relatively small amount of photos or videos, and direct-photogrammetry which requires large amount of photos directly taken for the purpose of 3D modelling. When the indirect-photogrammetry method, which was mainly used in this study, lacked enough photographic information, already secured 2D numerical deformation data was used as a compensation. This made 3D collision deformation modelling for accident reconstruction analysis possible.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.49-56
• /
• 2009

In this study, a side collision accident reconstruction using database based on the deformed shape information from the collision test using model cars is suggested. A deformation index and angle index related to the deformed shape is developed to set the database for the collision accident reconstruction algorithm. Two small size RC cars are developed to carry out the side collision test. Several side collision tests according to the velocity and collision angles are performed for establishing the side collision database. A high speed camera with 1000fps is used to capture the motion of the car. A side collision accident reconstruction algorithm is developed and applied to find the collision conditions before the accident occurs. Two collision cases are tested to validate the database and the algorithm. The results obtained by the reconstruction algorithm show good match with original conditions with regard to the velocity and angle.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.5
• /
• pp.447-458
• /
• 2017

Objective: The purpose of this study is to present the basic guidelines for preventing human error by measuring and analyzing the risk of collision perceived by the ship operator in the collision risk situation by using Korea Coast Guard patrol ships. Background: In the last 5 years, 97.5% of the causes of ship collision occurred at the sea was caused by human factors. However, the rate of marine accidents due to human error has not been reduced yet. Experiments and researches on the ship operators using the ships in actual operation are rarely performed. Method: Using two K.C.G Ships on the sea, the ship measured by 30 persons who are the subject of the ship (ship operator) when both ships approach and the relative distance gradually decreases in four encounter situations, perceived ship collision risk (PSCR) data were analyzed by statistical analysis. Results: The age and boarding career of the ship operator in the situation of ship collision risks encountered a negative impact on perceived collision risk in all four opposing encounter situations S1 ($000^{\circ}$), S2 ($045^{\circ}$), S3 ($090^{\circ}$) and S4 ($135^{\circ}$) respectively. That is, the higher the age of the ship operator, the lower the perceived risk of collision and the lower the age, the higher the risk of collision. Also, there was a difference between the average of group A (20~30 years) and group B (40~50 years) according to age of the ship operators at $000^{\circ}$, $045^{\circ}$ and $090^{\circ}$ and there was no difference at $135^{\circ}$. The mean difference of the experience of boarding career was also significantly different between group A (less than 4 years) and group B (more than 5 years), but there was no significant difference at $135^{\circ}$. Conclusion: The results showed that age and boarding career of the ship operators had negative impact on perceived collision risk and there was a difference in perceived risk of collision according to age and abundance of boarding career. As a result, by focusing on the ship operators who are in the age group of 20~30 years old and have less than 4 years of experience in boarding the ship. It is expected that the effect of prevention of marine accidents can be expected by avoiding collision avoidance. Application: The results of this study can be used as policy data of related organizations to prevent human error of ship operators and as training data of training institutes.

• Journal of ILASS-Korea
• /
• v.21 no.2
• /
• pp.78-87
• /
• 2016

This study experimentally investigated the effects of droplet temperature on the heat transfer characteristics during collision of a single droplet on a heated wall above the Leidenfrost temperature. Experiments were performed by varying temperature from 40 to $100^{\circ}C$ while the collision velocity and wall temperature were maintained constant at 0.7 m/s at $500^{\circ}C$, respectively. Evolution of temperature distribution at the droplet-wall interface as well as collision dynamics of the droplet were simultaneously recorded using synchronized high-speed video and infrared cameras. The local heat flux distribution at the collision surface was deduced using the measured temperature distribution data. Various physical parameters, including residence time, local heat flux distribution, heat transfer rate, heat transfer effectiveness and vapor film thickness, were measured from the visualization data. The results showed that increase in droplet temperature reduces the residence time and increases the vapor film thickness. This ultimately results in reduction in the total heat transfer by conduction through the vapor film during droplet-wall collision.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5A
• /
• pp.358-366
• /
• 2012

LED-ID (Light Emitting Diode - Identification) is one of the key technologies for identification, data transmission, and illumination simultaneously. This is the new paradigm in the identification technology environment. There are many issues are still now challenging to achieve high performance in LED-ID system. Collision issue is one of them. Actually this is the most significant issue in all identification system. LED-ID system also suffers from collision problem. In our system, collision occurs when two or more readers transmit data to tag at the same time or vice versa. There are many anti-collision protocols to resolve this problem; such as: Slotted ALOHA, Basic Frame Slotted ALOHA, Query Tree, Tree Splitting, and Q-Algorithm etc. In this paper, we propose modified Q-Algorithm to resolve collision at tag. The proposed protocol is based on Q-Algorithm and used the information of arrived readers to a tag from neighbor. The information includes transmitting slot number of readers and the number of readers that can be arrived in next slot. Our proposed protocol can reduce the numbers of collision slot and the successful time to identify all readers. In this paper our simulation and theoretical results are presented.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.5
• /
• pp.477-485
• /
• 2010

In this study, we suggested several approaches to evaluate the collision acceleration of a carbody under the article 16 of the Korean rolling stock safety regulations. There are various methods to evaluate the rigid body accelerations such as the displacement comparison method by double integration of filtered acceleration data, the velocity comparison method by direct integration of filtered acceleration data, and the analysis method of a velocity-time curve. We compared these methods one another using the 1D dynamic simulation model of Korean high-speed EMU composed of nonlinear springs or bars, dampers, and masses. From the simulation results, the velocity-time curve analysis method and the displacement comparison method are recommended to filter high frequency oscillations and evaluate the maximum and average accelerations of a carbody after a train collision.

• Journal of the Korean Society of Safety
• /
• v.29 no.6
• /
• pp.151-157
• /
• 2014

This study deals with the rear-end collision at roundabouts. The purpose of this study is to develop the accident models of rear-end collision in Korea. In pursuing the above, this study gives particular attention to developing the appropriate models using Poisson, negative binomial model, ZAM, multiple linear and nonlinear regression models, and statistical analysis tools. The main results are as follows. First, the Vuong statistics and overdispersion parameters indicate that ZIP is the most appropriate model among count data models. Second, RMSE, MPB, MAD and correlation coefficient tests show that the multiple nonlinear model is the most suitable to the rear-end collision data. Finally, such the independent variables as traffic volume, ratio of heavy vehicle, number of circulatory roadway lane, number of crosswalk and stop line are adopted in the optimal model.

• Journal of Navigation and Port Research
• /
• v.32 no.7
• /
• pp.529-535
• /
• 2008

As a method to reduce collision accidents of ships at sea, this paper suggests an expert system for collision avoidance and navigation (hereafter "ESCAN"). The ESCAN is designed and developed by using the theory and technology of expert system and based on the information provided by AIS and RADAR/ARPA system. In this paper the ESCAN is composed of four(4) components; Facts/Data Base in charge of preserving data from navigational equipment, Knowledge Base storing production rules of the ESCAN, Inference Engine deciding which rules are satisfied by facts or objects, User System Interface for communication between users and ESCAN. The ESCAN has the function of real--time analysis and judgment of various encountering situations between own ship and targets, and is to provide navigators with appropriate plans of collision avoidance and additional advice and recommendation This paper, as a basic study, is to introduce the basic design and function of ESCAN.