• 한국보건간호학회지
• /
• 제5권2호
• /
• pp.67-75
• /
• 1991

This study was conducted to evaluate the difference of staphylococcal colonization between lactating mothers and nursery stares. Samples were obtained from the hands and noses of the newborn(admitted to S Univ. hospital's nursery from 1991. 5. 23 to 6. 8), their mothers and nursery staffs. They were cultured, and then the presence/absence of pathogenic staphylococci in them were analyzed by Fisher exact probability test which led to these conclusion of significance as follows: 1. No differences were detected in pathogenic rate of nasal swab culture between breast~fed newborns and formula-fed ones. 2. Delivery type and hospitalization the ones from the brest-fed newborns show high rate of Sta. aureus coa(+). In case of either C-sec delivery or long (more than 4 days) hospitalization, formula-fed ones in case of NSVD or short (less than 3 days) hospitalization. 3. The ones from breast feeding mothers show higher sta. aureus coa(+) than those from nursery staffs, which was of no significance statistically. Considering nursery staffs only, however, the comparison of those with the data in April indicates that the pathogen rate is higher for hand than nose, and Sta aureus coa(+) for hand is far lower in June than in April, which was statistically significant. These results lead us to infer that newborn infection in hospitalization could be largely reduced by maintaining the ordinary hygienes. Such as the handwashing of mothers as well as nursery staffs (directly involved in newborn care) Thus the pre-enterance hand washing of a mother who visits the nursery only for breast feeding (without any other medical responsibility) should be done, like other medical agents, with $0.05\%$ chlorhexidine antiseptics rather than simple soap cleansing; the one 'that is worth emphasizing thoroughly.

• 해양환경안전학회지
• /
• 제22권2호
• /
• pp.181-186
• /
• 2016

본 연구에서는 해양 수산분야의 대학생 자원봉사활동에 대한 자료를 수집하여 활동유형을 유류방제작업, 어촌봉사활동, 해안정화작업 등으로 분석하였다. 또한 자원봉사 참여자 대부분은 환경보호, 보람, 사회교류, 특별체험, 자연과의 동화측면에서 만족하고 있었다. 주제측면에서 체계성, 효율성, 활동의 다양성, 자원홍보활용, 봉사이후 보상, 자기봉사역량 측면에서 불만족스러워 한다. 이러한 연구 결과를 바탕으로 대학생 자원봉사의 정책적 측면에서 해양 수산분야의 자원봉사를 증진시킬 수 있는 방안을 제안하였다.

• 한국의료질향상학회지
• /
• 제14권1호
• /
• pp.55-59
• /
• 2008

Background : The purpose of inner cannula is to protect the upper air way and permit air to pass freely, in addition, to provide endotracheal suction, artificial respiration and to maintain adequate oxygen saturation. The tube needs to be sterilized for maintenance and cleanness of air way and for prevention of bronchospasm. However, it has been reported that there is no guideline for sterilization and many hospitals conduct their own sterilization methods, for example, once a day(13's general hospital), three times a day(The Catholic University of Korea ST Mary's hospital) or even no cleansing. Consequently, the QI team of our hospital suggested the SOP(standard operating procedure) of sterilization and evaluate cost and time effect in nursing. Method : 1) Benchmarking of 13's neurosurgery department of general hospital in Seoul 2) Investigation of test records of sputum culture from patients with intubation for tracheotomy 3) Check of results of O2 Sat. monitoring to confirm of maintaining opened air way Result : 1) Improvement of process: decrease of excess sterilization of inner cannula (from 3 times a day to once a day) 2) Cost effects: saving over 10 million won per one year 3) Providing better nursing: time effects (30 min a day) permit to conduct more nursing activities Conclusion : It can get Cost and time effects in nursing with improved sterilization method of inner cannula. It needs to do research on improvement of the monthly exchange protocol of outer cannula and provide supporting data for the proper exchange schedule. The result of additional microorganism detection from patients with new process needs to be evaluated further more.

• 대한치과보철학회지
• /
• 제32권2호
• /
• pp.225-233
• /
• 1994

The restorations of the severely damaged teeth by post core have been increased with the developement of endodontic procedures. But high failure rates of these procedures being reported, various restorative modifications were induced for successful treatments. Cast post-core and prefabricated post with core buildups are choice of treatment. The main causes of failure of the restorations are the fracture of post and core, root fracture, and recurrent caries due to microleakage. Recently, the acid etching technique and the use of dentin bonding agent at tooth surface to reduce the possible microleakage at the tooth-restoration interfaces were introduced. The object of this study was to measure and compare the microleakage by the types and cementation methods of post-core. For this study, forty extracted human anterior teeth were selected for specimen. After cleansing and routine endodontic procedures, anatomic crowns of each specimen were removed at the level of 2mm above the cementoenamel junction. Canals were preparated for post insertion and specimens were divided into four groups randomly. Post-cores were fabricated according to method for each group. Microleakage was measured by length of dye penetration at the tooth-restoration interfaces with measuring microscope at 50 magnification. Oneway ANOVA and t-test were performed for statistical analysis of resulting data. The following results were obtained from this study. 1. There wert significant statistical differences in degree of microleakage between each group (p<0.01). 2. Cast post-core cemented with ZPC (Group I) showed the most severe microleakage pattern$(1.5547{\pm}0.0872mm)$, and cast post-core cemented with adhesive resin cement after tooth surface treatment with dentin bonding agent (Group II) showed the least microleakage $(0.1497{\pm}0.0872mm)$. 3. Group IV revealed less dye penetrations than group III, but no statistical significance was seen between two groups.

• 구강회복응용과학지
• /
• 제23권3호
• /
• pp.259-268
• /
• 2007

purpose: This study was to evaluate the shear bond strength of Lithium Disilicate Glass-Ceramic by removable method of temporary cement on the abutment tooth. Material and Method: Sixty molar teeth of human with the occlusal surface up were mounted in acrylic resin blocks. The 45 specimens were prepared to exposure dentin by diamond bur and the eugenol-containing temporary cement($Cavitec^{TM}$ ($KERR^{(R)}$, U.S.A)was applied to the dentin surfaces. After initial removal of the cement with a dental explorer, the specimens were divided into 4 groups of 15 specimens each. The dentin surfaces of the specimens were treated by rotary instrument with as follow pastes: $Zircate^{(R)}$ prophy paste(Dentsply, U.S.A), Radent Prophy Paste(Pascal company,inc. U.S.A), and Dental pumice(Wip mix corporation,U.S.A). An adhesive resin luting agent(Variolink $II^{(R)}$, Ivoclar Vivadent, Leichtenstein) including Monobond-S and $Excite^{(R)}$ was applied to all specimens. The ceramic specimens were made with an A1 ingot of IPS Empress $II^{(R)}$ (Ivoclar Vivadent, Leichtenstein). After the specimens were stored in distilled water for 48hr, the shear bond strength(MPa) was measured by a Universal testing machine(Zwick 145641, Zwick, Germany) at a 1mm/min cross-head speed. The data were statistically analyzed by one-way ANOVA and Duncan's multiple range test. Results: In all group, there were no significant differences in comparison with the control group(p>0.05). The pattern of most failure showed the mixed type of cohesive and adhesive failure. Conclusion: Resin bond strength of IPS Empress $II^{(R)}$ was not affected by removal method of the temporary cement.

• The Journal of Advanced Prosthodontics
• /
• 제6권2호
• /
• pp.79-87
• /
• 2014

PURPOSE. The aim of this study was to determine the efficiency of Erbium, Chromium: Yttrium-Scandium-Gallium-Garnet laser in different output powers for removing permanent resin cement residues and therefore its influence on microshear bond strength compared to other cleaning methods. MATERIALS AND METHODS. 90 extracted human molars were sectioned in 1 mm thickness. Resin cement was applied to surface of sliced teeth. After the removal of initial cement, 6 test groups were prepared by various dentin surface treatment methods as follows: no treatment (Group 1), ethylene diamine tetra acetic acid application (Group 2), Endosolv R application (Group 3), 1.25 W Erbium, Chromium:Yttrium-Scandium-Gallium-Garnet laser irradiation (Group 4), 2 W Erbium, Chromium:Yttrium-Scandium-Gallium-Garnet laser irradiation (Group 5) and 3.5 W Erbium, Chromium:Yttrium-Scandium-Gallium-Garnet laser irradiation (Group 6). The topography and morphology of the treated dentin surfaces were investigated by scanning electron microscopy (n=2 for each group). Following the repetitive cementation, microshear bond strength between dentin and cement (n=26 in per group) were measured with universal testing machine and the data were analyzed by Kruskal Wallis H Test with Bonferroni correction (P<.05). Fracture patterns were investigated by light microscope. RESULTS. Mean microshear bond strength ${\pm}$ SD (MPa) for each group was $34.9{\pm}17.7$, $32.1{\pm}15.8$, $37.8{\pm}19.3$, $31.3{\pm}12.7$, $44.4{\pm}13.6$, $40.2{\pm}13.2$ respectively. Group 5 showed significantly difference from Group 1, Group 2 and Group 4. Also, Group 6 was found statistically different from Group 4. CONCLUSION. 2 W and 3.5 W Erbium, Chromium: Yttrium-Scandium-Gallium-Garnet laser application were found efficient in removing resin residues.

• Safety and Health at Work
• /
• 제2권3호
• /
• pp.290-300
• /
• 2011

Objectives: There is limited data regarding the toxicity of methylcyclohexane, despite its wide use in rubber adhesives, paint diluents, and cleansing agents. This study aimed to verify the toxicity and influence on the reproductive system of methylcyclohexane after its repeated injection in Sprague Dawley (SD) rats. Methods: Methylcyclohexane was injected subcutaneously into male and female SD rats once a day, five times a week, for 13 weeks at different doses (0, 10, 100, and 1,000 mg/kg/day) for each group. The toxicity of testing material was verified by observing the change in body and organ weight, hematological change, pathological findings, and effect on the reproductive system at each different concentration. Results: In the 1,000 mg/kg/day group, there were cases of animal deaths. In animals that survived, hematological changes, including a decrease in the red blood cell count, were observed. A considerable weight gain or loss and pathological abnormalities in the liver, kidney, and other organs were found. However, the 10 and 100 mg/kg/day groups did not cause deaths or other specific abnormalities. In terms of reproductive toxicity, there were changes in hormone levels, including a significant decrease in hormones such as estradiol and progesterone (p < 0.001) in male animals. Menstrual cycle change for female animals did not show concentration dependency. Conclusion: When injected repeatedly for 13 weeks, methylcyclohexane proved to be toxic for the liver, heart, and kidney at a high dose. The absolute toxic dose was 1,000 mg/kg/day, while the no observed adverse effect level was less than 100 mg/kg/day. The substance exerted little influence on the reproductive system.

• 대한화장품학회지
• /
• 제29권2호
• /
• pp.251-270
• /
• 2003

소비자 욕구의 다양화와 관련 기술 등의 발달로 인하여 피부 미화, 청결 등의 단순한 효능만을 가지던 화장품이 이제는 주름개선, 미백 등의 실질적인 효능 효과를 가지는 제품으로 상품의 개발 방향이 변화되었다. 국내에서도 이러한 흐름에 발 맞추어 2000 년 식품의약품안전청 고시에 의해 화장품법이 제정되었고, 국내 화장품 산업이 발전할 수 있는 도약의 전기와 함께 본격적인 `기능성화장품'시대가 개막되었다. 2000 년 7 월 화장품 법 시행 이후 나름대로 정착되어가고 있는 기능성 화장품 제도가 변화하는 여성 소비자들에게 어떻게 이해되고 있는지를 라이프스타일 중심으로 파악해 봄으로써 라이프 스타일에 따른 기능성 화장품의 소비자 유형 분류에 대한 기초 정보 제공과 기능성 화장품 시장 세분화에 대한 마케팅 전략 수립의 기초 자료가 되리라 사료된다.

• Toxicological Research
• /
• 제35권2호
• /
• pp.137-154
• /
• 2019

Triclosan (TCS) is an antimicrobial compound used in consumer products. The purpose of current study was to examine toxicology and risk assessment of TCS based on available data. Acute toxicities of oral, transdermal and inhalation routes were low, and phototoxicity and neurotoxicity were not observed. Topical treatment of TCS to animal caused mild irritation. TCS did not induce reproductive and developmental toxicity in rodents. In addition, genotoxicity was not considered based on in vitro and in vivo tests of TCS. It is not classified as a carcinogen in international authorities such as International Agency for Research on Cancer (IARC). No-observed-adverse-effect level (NOAEL) was determined 12 mg/kg bw/day for TCS, based on haematoxicity and reduction of absolute and relative spleen weights in a 104-week oral toxicity study in rats. Percutaneous absorption rate was set as 14%, which was human skin absorption study reported by National Industrial Chemicals Notification and Assessment Scheme (NICNAS) (2009). The systemic exposure dosage (SED) of TCS has been derived by two scenarios depending on the cosmetics usage of Koreans. The first scenario is the combined use of representative cosmetics and oral care products. The second scenario is the combined use of rinse-off products of cleansing, deodorants, coloring products, and oral care products. SEDs have been calculated as 0.14337 mg/kg bw/day for the first scenario and 0.04733 mg/kg bw/day for the second scenario. As a result, margin of safety (MOS) for the first and second scenarios was estimated to 84 and 253.5, respectively. Based on these results, exposure of TCS contained in rinse-off products, deodorants, and coloring products would not pose a significant health risk when it is used up to 0.3%.

• 한국정보시스템학회지:정보시스템연구
• /
• 제30권4호
• /
• pp.277-301
• /
• 2021

Purpose The purpose of this study is to analyze the sentiment responses of the general public to non-face-to-face work using text mining methodology. As the number of non-face-to-face complaints is increasing over time, it is difficult to review and analyze in traditional methods such as surveys, and there is a limit to reflect real-time issues. Approach This study has proposed a method of the research model, first by collecting and cleansing the data related to non-face-to-face work among tweets posted on Twitter. Second, topics and keywords are extracted from tweets using LDA(Latent Dirichlet Allocation), a topic modeling technique, and changes for each section are analyzed through DTM(Dynamic Topic Modeling). Third, the complaints of non-face-to-face work are analyzed through the classification of positive and negative polarity in the COVID-19 section. Findings As a result of analyzing 1.54 million tweets related to non-face-to-face work, the number of IDs using non-face-to-face work-related words increased 7.2 times and the number of tweets increased 4.8 times after COVID-19. The top frequently used words related to non-face-to-face work appeared in the order of remote jobs, cybersecurity, technical jobs, productivity, and software. The words that have increased after the COVID-19 were concerned about lockdown and dismissal, and business transformation and also mentioned as to secure business continuity and virtual workplace. New Normal was newly mentioned as a new standard. Negative opinions found to be increased in the early stages of COVID-19 from 34% to 43%, and then stabilized again to 36% through non-face-to-face work sentiment analysis. The complaints were, policies such as strengthening cybersecurity, activating communication to improve work productivity, and diversifying work spaces.