• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.3
• /
• pp.409-422
• /
• 2021

A doctor's coat worn by Seo Jae-pil (1864-1951)-National Registered Cultural Heritage No. 607-was conserved with wet cleaning to remove thick wrinkles and brown stains that had been present for a long time. This paper also applied microscopic observation and infrared spectrophotometric analysis to obtain scientific investigation data on the cotton fabric of this doctor's coat. Information about Seo Jae-pil's time as a doctor, the process of changing his English name, and C.D.Williams & Co., which produced the medical coat, revealed that this doctor's coat was worn by Seo Jae-pil between 1892 and 1898 or 1926 and 1939. Additionally, this paper proposes a pad for filling relics that can protect the shape of modern and contemporary clothing, such as Seo Jae-pil's doctor's coat, for display at a museum site. Specifically, this research provides detailed information on the manufacturing of filling pads that can prevent damage to modern and contemporary jackets and coats so that they can be used in the cultural heritage field by developing filling materials for three-dimensional costume artifacts.

• Korean Journal of Veterinary Service
• /
• v.44 no.4
• /
• pp.315-320
• /
• 2021

To analyze prevalence of mycotoxins, a total of 74 feedstuff samples were collected from silos (n=37) and hoppers (n=37) in nine pig farms. Six mycotoxins were tested with commercialized ELISA kits. All samples were contaminated with four or more mycotoxins. Zearalenone was detected in all of the tested samples. Ochratoxin, deoxynivalenol and H-2/HT-2 toxin were detected in more than 90% of the samples. And also, fumonisin was positive in 89.2% of the samples from the silos, 75.2% from the hoppers, respectively. On the other hand, aflatoxin was detected in about 40% of the samples. When the behavior of lactating sows was observed, possible mycotoxicosis was suspected. It was confirmed that their feedstuffs were contaminated with high levels of mycotoxins such as ochratoxin and T-2/HT-2 toxin. After cleaning the feedline, the clinical symptoms in sows suspected with mycotoxicosis were disappeared. Although mycotoxin concentration in most of the feedstuffs was below the acceptance level, these data indicate that what are required is more monitoring and continuous management for mycotoxins in pig feedstuffs.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.3
• /
• pp.177-187
• /
• 2023

This study aims to validate a tool evaluating MOOCs for higher education from the perspective of education service. Based on the results of related researches, a potential model for evaluating MOOCs (4 factors and 8 sub-factors) was made. An evaluation tool consisting of 18 survey items was delivered to 138 college students. After data cleaning, 136 surveys were used for exploratory factor analysis (principal component analysis. varimax rotation) and reliability analysis that confirmed the fitness of the potential model. Four exploratory constructs and seven sub-factors were extracted: Factor I was labeled as 'Systemic Learning Experience,' Factor II, 'Value Experience,' Factor III, 'Co-creation of Value Experience,' and Factor IV, 'High Order Learning Experience.' Reliability estimates using Cronbach's alpha indicated that the evaluation tool had good internal consistency. In conclusion, the evaluation tool for MOOCs in higher education was proven to be valid and reliable.

• Journal of Convergence for Information Technology
• /
• v.12 no.5
• /
• pp.298-304
• /
• 2022

In this study, it is intended to provide basic research data on hair loss and problematic scalp that is expanding to lower age groups and women. When using Company B's hair ampoule containing L-Menthol, Salicylic acid, and Dexpanthenol daily for women in their 20s with problematic scalp, the effect on the scalp and hair after 4 weeks was investigated. As a result of this study, when using Company B's ampoule containing L-Menthol, Salicylic acid, and Dexpanthenol, the subjects showed improvement effects such as relieving inflammation, reducing scalp fever and erythema, reducing itching and hair loss, and increasing hair thickness. In addition, it was confirmed that the scalp self-diagnosis of the subjects showed improvement effects on scalp satisfaction, scalp vitality and elasticity, heat generation, scalp pulling after cleaning, and itching. Through these research results, it is believed that products containing L-Menthol, Salicylic acid, and Dexpanthenol will help improve problematic scalp and hair.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.1
• /
• pp.45-55
• /
• 2022

PURPOSE. This in vitro study investigates the effect of different post-rinsing times and methods on the trueness and precision of denture base resin manufactured through stereolithography. MATERIALS AND METHODS. Ninety clear photopolymer resin specimens were fabricated and divided into nine groups (n = 10) based on rinsing times and methods. All specimens were rinsed with 99% isopropanol alcohol for 5, 10, and 15 min using three methods-automated, ultrasonic cleaning, and hand washing. The specimens were polymerized for 30 min at 40℃. For trueness, the scanned intaglio surface of each SLA denture base was superimposed on the original standard tessellation language (STL) file using best-fit alignment (n = 10). For precision, the scanned intaglio surface of the STL file in each specimen group was superimposed across each specimen (n = 45). The root mean square error (RMSE) was measured, and the data were analyzed statistically through one-way ANOVA and Tukey test (α < .05). RESULTS. The 10-min automated group exhibited the lowest RMSE. For trueness, this was significantly different from specimens in the 5-min hand-washed group (P < .05). For precision, this was significantly different from those of other groups (P < .05), except for the 15-min automated and 15-min ultrasonic groups. The color map results indicated that the 10-min automated method exhibited the most uniform distribution of the intaglio surface adaptation. CONCLUSION. The optimal postprocessing rinsing times and methods for achieving clear photopolymer resin were found to be the automated method with rinsing times of 10 and 15 min, and the ultrasonic method with a rinsing time of 15 min.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.06a
• /
• pp.3-3
• /
• 2001

Recently TiN, TiAlN, CrN hardcoatings have adapted many industrial application such as die, mold and cutting tools because of good wear resistant and thermal stability. However, in terms of high speed process, general hard coatings have been limited by oxidation and thermal hardness drop. Especially in the case of PCB drill, high speed cutting and without lubricant process condition have not adapted these coatings until now. Therefore more recently, superhard nanocomposite coating which have superhard and good thermal stability have developed. In previous works, WC-TiAlN new nanocomposite film was investigated by cathodic arc ion plating system. Control of AI concentration, WC-TiAlN multi layer composite coating with controlled microstructure was carried out and provides additional enhancement of mechanical properties as well as oxidation resistance at elevated temperature. It is noted that microhardness ofWC-TiA1N multi layer composite coating increased up to 50 Gpa and got thermal stability about $900^{\circ}C$. In this study WC-TiAlN nanocomposite coating was deposited on PCB drill for enhancement of life time. The parameter was A1 concentration and plasma cleaning time for edge sharpness maintaining. The characteristic of WC-TiAlN film formation and wear behaviors are discussed with data from AlES, XRD, EDS and SEM analysis. Through field test, enhancement of life time for PCB drill was measured.

• Journal of dental hygiene science
• /
• v.23 no.1
• /
• pp.1-12
• /
• 2023

Background: This study aimed to identify the present level and needs of clinical dental hygienists and to present the Borich needs assessment and the locus for focus model as integrated priorities. Methods: The participants of this study were dental hygienists working in dental clinics (hospitals). The final data of the 194 participants were analyzed using frequency analysis and a paired sample t-test. To analyze the need for clinical dental hygienists to perform work, the Borich priority determination formula was used. The x-y plane consisting of four quadrants was used to analyze the need using the locus for focus model, which helps to determine the priority while showing visual effects. Results: "Scaling" was the highest required level for clinical dental hygienists, and "panorama taking" was the highest present level. The priorities of educational needs were systematically and visually derived from dental hygienists who were currently working through the Borich needs assessment and the locus for focus model for each task performed in the clinical field. Through the priorities of these two models, a total of 13 items appeared in the common high-level area; "oral health care (disability)," "oral health care (systemic disease)," "applying a rubber dam," "professional mechanical tooth cleaning," "root planing," "taking vital signs," "medication counseling," "wire cutting," "removing cement after removing band/bracket," "delivering bracket," "preparing mini-screw implantation," "dental insurance claim," and "patient reception." Conclusion: Based on the results, the department of dental hygiene should maintain and improve the standardized clinical practice curriculum and clinical dental hygienists' practical skills and contribute to the realization of the legal scope of dental hygienists, reflecting the requirements of clinical fields.

• Restorative Dentistry and Endodontics
• /
• v.46 no.1
• /
• pp.11.1-11.11
• /
• 2021

Objectives: The aim of this study was to compare smear layer removal by conventional application (CA), passive ultrasonic irrigation (PUI), EasyClean (EC), and XP-Endo Finisher (XPF), using 17% ethylenediaminetetraacetic acid (EDTA) after chemomechanical preparation, as evaluated with scanning electron microscopy (SEM). Materials and Methods: Forty-five single-rooted human mandibular premolars were selected for this study. After chemomechanical preparation, the teeth were randomly divided into 5 groups according to the protocol for smear layer removal, as follows: G1 (control): CA of distilled water; G2 (CA): CA of 17% EDTA; G3 (PUI): 17% EDTA activated by PUI; G4 (EC): 17% EDTA activated by EC; and G5 (XPF): 17% EDTA activated by XPF. SEM images (×1,000) were obtained from each root third and scored by 3 examiners. Data were evaluated using the Kruskal-Wallis and Dunn tests (p < 0.05). Results: In the apical third, there were no statistically significant differences among the groups (p > 0.05). In the cervical and middle thirds, the experimental groups performed better than the control group (p < 0.05); however, G2 presented better results than G3, G4, and G5 (p < 0.05), which showed no differences among one another (p > 0.05). Conclusions: No irrigation method was able to completely remove the smear layer, especially in the apical third. Using CA for the chelating solution performed better than any form of activation.

• Journal of Preventive Medicine and Public Health
• /
• v.57 no.2
• /
• pp.176-184
• /
• 2024

Objectives: The dengue prevention program known as "One House One Mosquito Larva Inspector" involves health volunteers who play a crucial role in the surveillance of mosquito larvae and reporting their findings to local public health officials. This study aimed to identify factors related to the knowledge, attitudes, and practices (KAP) of dengue prevention behavior among these health volunteers. Methods: A study was conducted in 5 sub-districts in Malang, an urban area in Indonesia. We employed a cross-sectional design and utilized a semi-structured questionnaire to assess the KAP of 400 health volunteers. Data were collected through face-to-face interviews. Results: Multiple logistic regression analysis revealed that individuals with a more positive attitude (odds ratio [OR], 1.69; p<0.05) and those with family sizes greater than five persons (OR, 1.90; p<0.05) were more likely to engage in effective dengue prevention practices. Additionally, possesing good knowledge was significantly assocated with more positive attitude (OR, 2.24; p<0.001). Furthermore, 40% reduction in positive attitude was observed in those over 45 years (OR, 0.60; p<0.05). The best practices most frequently reported by the majority of respondents included always reporting their surveillance activities (75.8%) and cleaning the water container in the bathroom at least once a week (65.2%). However, only 52.2% of respondents regularly checked for mosquito larvae in their neighborhood. Conclusions: Sustainable promotion and training for the "One House One Mosquito Larva Inspector" initiative are necessary, particularly among young health volunteers, to improve dengue prevention behaviors both within their own homes and in the surrounding environment.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.1
• /
• pp.8-13
• /
• 2024

Objectives: To evaluate the levels of exposure to organic compounds during aircraft disinfection and seat cover replacement operations. Methods: According to the working schedule, organic compounds were collected using activated carbon tubes and then analyzed by GC/FID and GC/MSD. Results: In the disinfection task, the main substances listed in the material safety data sheet (MSDS) of the disinfectant were not detected. However, 1-bromopropane, which had been used in the previous task of replacing seat covers, was detected at a level of 2.37 ppm at the measurement time. During seat cover replacement, bonding workers were exposed to 2.48 ppm on an eight-hour time-weighted average, and seat cover replacement workers were exposed to 0.22 ppm. Conclusions: It is necessary to ensure the reliability of MSDS. A work environment management system is necessary when different companies alternate working in the same place.