• 한국의류학회지
• /
• 제45권3호
• /
• pp.409-422
• /
• 2021

A doctor's coat worn by Seo Jae-pil (1864-1951)-National Registered Cultural Heritage No. 607-was conserved with wet cleaning to remove thick wrinkles and brown stains that had been present for a long time. This paper also applied microscopic observation and infrared spectrophotometric analysis to obtain scientific investigation data on the cotton fabric of this doctor's coat. Information about Seo Jae-pil's time as a doctor, the process of changing his English name, and C.D.Williams & Co., which produced the medical coat, revealed that this doctor's coat was worn by Seo Jae-pil between 1892 and 1898 or 1926 and 1939. Additionally, this paper proposes a pad for filling relics that can protect the shape of modern and contemporary clothing, such as Seo Jae-pil's doctor's coat, for display at a museum site. Specifically, this research provides detailed information on the manufacturing of filling pads that can prevent damage to modern and contemporary jackets and coats so that they can be used in the cultural heritage field by developing filling materials for three-dimensional costume artifacts.

• 한국동물위생학회지
• /
• 제44권4호
• /
• pp.315-320
• /
• 2021

To analyze prevalence of mycotoxins, a total of 74 feedstuff samples were collected from silos (n=37) and hoppers (n=37) in nine pig farms. Six mycotoxins were tested with commercialized ELISA kits. All samples were contaminated with four or more mycotoxins. Zearalenone was detected in all of the tested samples. Ochratoxin, deoxynivalenol and H-2/HT-2 toxin were detected in more than 90% of the samples. And also, fumonisin was positive in 89.2% of the samples from the silos, 75.2% from the hoppers, respectively. On the other hand, aflatoxin was detected in about 40% of the samples. When the behavior of lactating sows was observed, possible mycotoxicosis was suspected. It was confirmed that their feedstuffs were contaminated with high levels of mycotoxins such as ochratoxin and T-2/HT-2 toxin. After cleaning the feedline, the clinical symptoms in sows suspected with mycotoxicosis were disappeared. Although mycotoxin concentration in most of the feedstuffs was below the acceptance level, these data indicate that what are required is more monitoring and continuous management for mycotoxins in pig feedstuffs.

• 한국컴퓨터정보학회논문지
• /
• 제28권3호
• /
• pp.177-187
• /
• 2023

이 연구는 교육서비스 관점에서 MOOC의 질 평가를 위한 잠재모형을 도출하고 신뢰롭고 타당한 MOOC 질 평가도구를 개발하고 타당화하는 데 목적이 있다. 연구목적을 달성하기 위해 선행 연구결과에 기초해서, MOOC 평가 잠재모형(4개 요인과 8개 하위요인)을 도출하였다. 이 잠재모형을 토대로 18개 예비 평가문항을 개발한 후, 대학 원격수업 경험이 있는 학습자 138명을 대상으로 문항중요도 설문을 실시하였다. 수집된 136개의 자료를 활용하여 탐색적 요인분석 결과, 수집된 데이터에서 4개의 요인(체제적 학습 경험, 가치 경험, 가치 경험의 공동 창조, 고차원 학습경험)과 7개의 하위요인(실제성, 신뢰성, 확신성, 반응성, 조직환경 체계성, 프로그램 체계성, 학습자 지지의 체계성, 공동주도성)으로 추출되었다. 신뢰도 분석결과, 선정된 문항들은 각 척도를 구성하는 문항으로서 높은 내적합치도를 보였다. MOOC에 대한 평가도구는 타당하고 신뢰할 수 있다는 결론을 내릴 수 있다.

• 융합정보논문지
• /
• 제12권5호
• /
• pp.298-304
• /
• 2022

본 연구에서는 낮은 연령층과 여성에게도 확대되고 있는 탈모와 문제성 두피에 대한 기초 연구자료를 제공하고자, 문제성 두피를 가진 20대 여성을 대상으로 L-Menthol, Salicylic acid, Dexpanthenol이 함유되어 있는 B사의 헤어 앰플을 매일 사용하였을 때, 4주 후 두피 및 모발에 미치는 영향을 알아보고자 하였다. 본 연구 결과, L-Menthol, Salicylic acid, Dexpanthenol이 함유되어 있는 B사의 앰플을 사용하였을 때 연구 대상자들의 두피 상태가 실험 전에 비하여 염증 완화, 두피 열 및 홍반 감소, 가려움증과 모발 빠짐 감소, 청결해진 모공 상태, 모발 굵기 증가 등 개선 효과를 보였으며, 연구 대상자들의 두피 자가진단을 통해 실험 전과 후의 두피 만족도, 두피 생기와 탄력, 열 발생도, 세정 후 두피 당김, 가려움증에 대한 개선 효과가 나타났음이 확인되었다. 이와같은 연구 결과를 통하여 L-Menthol, Salicylic acid, Dexpanthenol이 함유된 제품이 문제성 두피 및 모발 개선에 도움이 될 것으로 사료되어 진다.

• The Journal of Advanced Prosthodontics
• /
• 제14권1호
• /
• pp.45-55
• /
• 2022

PURPOSE. This in vitro study investigates the effect of different post-rinsing times and methods on the trueness and precision of denture base resin manufactured through stereolithography. MATERIALS AND METHODS. Ninety clear photopolymer resin specimens were fabricated and divided into nine groups (n = 10) based on rinsing times and methods. All specimens were rinsed with 99% isopropanol alcohol for 5, 10, and 15 min using three methods-automated, ultrasonic cleaning, and hand washing. The specimens were polymerized for 30 min at 40℃. For trueness, the scanned intaglio surface of each SLA denture base was superimposed on the original standard tessellation language (STL) file using best-fit alignment (n = 10). For precision, the scanned intaglio surface of the STL file in each specimen group was superimposed across each specimen (n = 45). The root mean square error (RMSE) was measured, and the data were analyzed statistically through one-way ANOVA and Tukey test (α < .05). RESULTS. The 10-min automated group exhibited the lowest RMSE. For trueness, this was significantly different from specimens in the 5-min hand-washed group (P < .05). For precision, this was significantly different from those of other groups (P < .05), except for the 15-min automated and 15-min ultrasonic groups. The color map results indicated that the 10-min automated method exhibited the most uniform distribution of the intaglio surface adaptation. CONCLUSION. The optimal postprocessing rinsing times and methods for achieving clear photopolymer resin were found to be the automated method with rinsing times of 10 and 15 min, and the ultrasonic method with a rinsing time of 15 min.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2001년도 춘계학술발표회 초록집
• /
• pp.3-3
• /
• 2001

Recently TiN, TiAlN, CrN hardcoatings have adapted many industrial application such as die, mold and cutting tools because of good wear resistant and thermal stability. However, in terms of high speed process, general hard coatings have been limited by oxidation and thermal hardness drop. Especially in the case of PCB drill, high speed cutting and without lubricant process condition have not adapted these coatings until now. Therefore more recently, superhard nanocomposite coating which have superhard and good thermal stability have developed. In previous works, WC-TiAlN new nanocomposite film was investigated by cathodic arc ion plating system. Control of AI concentration, WC-TiAlN multi layer composite coating with controlled microstructure was carried out and provides additional enhancement of mechanical properties as well as oxidation resistance at elevated temperature. It is noted that microhardness ofWC-TiA1N multi layer composite coating increased up to 50 Gpa and got thermal stability about $900^{\circ}C$. In this study WC-TiAlN nanocomposite coating was deposited on PCB drill for enhancement of life time. The parameter was A1 concentration and plasma cleaning time for edge sharpness maintaining. The characteristic of WC-TiAlN film formation and wear behaviors are discussed with data from AlES, XRD, EDS and SEM analysis. Through field test, enhancement of life time for PCB drill was measured.

• 치위생과학회지
• /
• 제23권1호
• /
• pp.1-12
• /
• 2023

Background: This study aimed to identify the present level and needs of clinical dental hygienists and to present the Borich needs assessment and the locus for focus model as integrated priorities. Methods: The participants of this study were dental hygienists working in dental clinics (hospitals). The final data of the 194 participants were analyzed using frequency analysis and a paired sample t-test. To analyze the need for clinical dental hygienists to perform work, the Borich priority determination formula was used. The x-y plane consisting of four quadrants was used to analyze the need using the locus for focus model, which helps to determine the priority while showing visual effects. Results: "Scaling" was the highest required level for clinical dental hygienists, and "panorama taking" was the highest present level. The priorities of educational needs were systematically and visually derived from dental hygienists who were currently working through the Borich needs assessment and the locus for focus model for each task performed in the clinical field. Through the priorities of these two models, a total of 13 items appeared in the common high-level area; "oral health care (disability)," "oral health care (systemic disease)," "applying a rubber dam," "professional mechanical tooth cleaning," "root planing," "taking vital signs," "medication counseling," "wire cutting," "removing cement after removing band/bracket," "delivering bracket," "preparing mini-screw implantation," "dental insurance claim," and "patient reception." Conclusion: Based on the results, the department of dental hygiene should maintain and improve the standardized clinical practice curriculum and clinical dental hygienists' practical skills and contribute to the realization of the legal scope of dental hygienists, reflecting the requirements of clinical fields.

• Restorative Dentistry and Endodontics
• /
• 제46권1호
• /
• pp.11.1-11.11
• /
• 2021

Objectives: The aim of this study was to compare smear layer removal by conventional application (CA), passive ultrasonic irrigation (PUI), EasyClean (EC), and XP-Endo Finisher (XPF), using 17% ethylenediaminetetraacetic acid (EDTA) after chemomechanical preparation, as evaluated with scanning electron microscopy (SEM). Materials and Methods: Forty-five single-rooted human mandibular premolars were selected for this study. After chemomechanical preparation, the teeth were randomly divided into 5 groups according to the protocol for smear layer removal, as follows: G1 (control): CA of distilled water; G2 (CA): CA of 17% EDTA; G3 (PUI): 17% EDTA activated by PUI; G4 (EC): 17% EDTA activated by EC; and G5 (XPF): 17% EDTA activated by XPF. SEM images (×1,000) were obtained from each root third and scored by 3 examiners. Data were evaluated using the Kruskal-Wallis and Dunn tests (p < 0.05). Results: In the apical third, there were no statistically significant differences among the groups (p > 0.05). In the cervical and middle thirds, the experimental groups performed better than the control group (p < 0.05); however, G2 presented better results than G3, G4, and G5 (p < 0.05), which showed no differences among one another (p > 0.05). Conclusions: No irrigation method was able to completely remove the smear layer, especially in the apical third. Using CA for the chelating solution performed better than any form of activation.

• Journal of Preventive Medicine and Public Health
• /
• 제57권2호
• /
• pp.176-184
• /
• 2024

Objectives: The dengue prevention program known as "One House One Mosquito Larva Inspector" involves health volunteers who play a crucial role in the surveillance of mosquito larvae and reporting their findings to local public health officials. This study aimed to identify factors related to the knowledge, attitudes, and practices (KAP) of dengue prevention behavior among these health volunteers. Methods: A study was conducted in 5 sub-districts in Malang, an urban area in Indonesia. We employed a cross-sectional design and utilized a semi-structured questionnaire to assess the KAP of 400 health volunteers. Data were collected through face-to-face interviews. Results: Multiple logistic regression analysis revealed that individuals with a more positive attitude (odds ratio [OR], 1.69; p<0.05) and those with family sizes greater than five persons (OR, 1.90; p<0.05) were more likely to engage in effective dengue prevention practices. Additionally, possesing good knowledge was significantly assocated with more positive attitude (OR, 2.24; p<0.001). Furthermore, 40% reduction in positive attitude was observed in those over 45 years (OR, 0.60; p<0.05). The best practices most frequently reported by the majority of respondents included always reporting their surveillance activities (75.8%) and cleaning the water container in the bathroom at least once a week (65.2%). However, only 52.2% of respondents regularly checked for mosquito larvae in their neighborhood. Conclusions: Sustainable promotion and training for the "One House One Mosquito Larva Inspector" initiative are necessary, particularly among young health volunteers, to improve dengue prevention behaviors both within their own homes and in the surrounding environment.

• 한국산업보건학회지
• /
• 제34권1호
• /
• pp.8-13
• /
• 2024

Objectives: To evaluate the levels of exposure to organic compounds during aircraft disinfection and seat cover replacement operations. Methods: According to the working schedule, organic compounds were collected using activated carbon tubes and then analyzed by GC/FID and GC/MSD. Results: In the disinfection task, the main substances listed in the material safety data sheet (MSDS) of the disinfectant were not detected. However, 1-bromopropane, which had been used in the previous task of replacing seat covers, was detected at a level of 2.37 ppm at the measurement time. During seat cover replacement, bonding workers were exposed to 2.48 ppm on an eight-hour time-weighted average, and seat cover replacement workers were exposed to 0.22 ppm. Conclusions: It is necessary to ensure the reliability of MSDS. A work environment management system is necessary when different companies alternate working in the same place.