• Journal of Periodontal and Implant Science
• /
• 제52권6호
• /
• pp.509-521
• /
• 2022

Purpose: Systemic health has a profound effect on dental treatment. The aim of this study was to evaluate peri-implant bone loss and health screening data to discover factors that may influence peri-implant diseases. Methods: This study analyzed the panoramic X-rays of patients undergoing health screenings at the Health Promotion Center at Seoul St. Mary's Hospital in 2018, to investigate the relationship between laboratory test results and dental data. The patients' physical data, such as height, weight, blood pressure, hematological and urine analysis data, smoking habits, number of remaining teeth, alveolar bone level, number of implants, and degree of bone loss around the implant, were analyzed for correlations. Their associations with glycated hemoglobin, glucose, blood urea nitrogen (BUN), creatinine, and severity of periodontitis were evaluated using univariate and multivariate regression analysis. Results: In total, 2,264 patients opted in for dental health examinations, of whom 752 (33.2%) had undergone dental implant treatment. These 752 patients had a total of 2,658 implants, and 129 (17.1%) had 1 or more implants with peri-implant bone loss of 2 mm or more. The number of these implants was 204 (7%). Body mass index and smoking were not correlated with peri-implant bone loss. Stepwise multivariate regression analysis revealed that the severity of periodontal bone loss (moderate bone loss: odds ratio [OR], 3.154; 95% confidence interval [CI], 1.175-8.475 and severe bone loss: OR, 7.751; 95% CI, 3.003-20) and BUN (OR, 1.082; 95% CI, 1.027-1.141) showed statistically significant predictive value. The severity of periodontitis showed greater predictive value than the biochemical parameters of blood glucose, renal function, and liver function. Conclusions: The results of this study showed that periodontal bone loss was a predictor of peri-implant bone loss, suggesting that periodontal disease should be controlled before dental treatment. Diligent maintenance care is recommended for patients with moderate to severe periodontal bone loss.

• Journal of Multimedia Information System
• /
• 제6권2호
• /
• pp.67-74
• /
• 2019

Bone density is one of the factors in the early failure of dental implants and doctors should make a preoperative assessment of jaw bone density using patient's CT data before dental implant surgery in order to find out whether the patient has osteoporosis and osteopenia. The main goal of this study was to propose a method that based on image processing techniques in order to provide accurate information about where to drill and place an abutment screw of implants in the jaw bone for doctors and reduce human activity for the estimation of the local cancellous bone density of mandible using CT data. The experiment was performed on a computed tomography data of the jaw bone of two different individuals. We assumed that the result of the estimation of jaw bone density depends on the angle of drilling and average HU (Hounsfield Unit) values were used to evaluate the quality of local cancellous bone density of mandible. As a result of this study, we have been developed a toolbox that can be used to estimate jaw bone density automatically and found a positive correlation between the angle of the drill and time complexity but a negative correlation between the diameter of the drill and time complexity.

• 근관절건강학회지
• /
• 제18권1호
• /
• pp.73-82
• /
• 2011

Purpose: The purpose of this study was to investigate the effects of a 12-week Tai Chi on the bone mineral density and bone metabolic markers in postmenopausal women Methods: Data were collected from March to July, 2009. Fifty postmenopausal women were recruited for the study. Twenty two women were allocated to experimental group, and 28 to control group. The experimental group underwent Tai Chi exercise twice a week for twelve weeks. The control group was only notified with results of bone mineral density and bone metabolic markers. Bone mineral density was measured by using of DTX-200 (Osteometer MediTech, Hawthorne, CA, USA) at distal radius site and bone metabolic markers were measured by radioimmunoassay method. Collected data were analyzed by t-test, $X^2$-test, and Mann-Whitney test. Results: After 12 weeks of treatment, the Tai Chi group showed a significant difference in bone mineral density compared to control group but no significant effect on osteocalcin and deoxypyridinoline level. Conclusion: Our results suggest that 12 weeks of Tai chi may delay bone loss in postmenopausal women.

• Archives of Plastic Surgery
• /
• 제32권1호
• /
• pp.55-59
• /
• 2005

The proper management of the pediatric facial bone fracture is critical in the facial bone development. This study characterizes the surgically treated patient population suffering from facial bone fractures by the use of current data from a large series consisting of 201 cases. The data was gathered through a retrospective chart review of patients surgically treated for facial bone fractures at the department of plastic and reconstructive surgery, Sanggye Paik hospital, Inje university medical center, collected over 10-years period from January, 1993 to December, 2002. Data regarding patient demographics(age, sex), seasonal distribution, location of fractures, and the causes of injury with admission periods, were collected. In total, there were 201cases of pediatric facial bone fractures. Male patients outnumbered female patients by a 5.48: 1 ratio and were found to engage in a wider range of behaviors that resulted in facial bone fractures. Physical violence was the leading cause of pediatric facial bone fractures(27.9%), followed by sports-related mechanisms (22.9%) and falling down(17.9%). The most prevalent age group was 11-15 years-old(71.1%) and there was a 14.3% prevalence in March. Among the location of fractures, the nasal bone was the most prevalent, accounting for 82.3% of injuries, followed by the orbit(9.95%), and the mandible fractures(7.5%). Most patients(59.7%) were treated within 6-9 days after trauma and the mean hospitalization period was 8-11 days. We should follow up the surgically treated patients, and they will be further evaluated about postoperative sequele and effect on the facial bone development. These studies demonstrate differences in the demographics and clinical presentation that, if applied to patients, will enable a more accurate diagnosis and proper management.

• 대한의용생체공학회:의공학회지
• /
• 제28권3호
• /
• pp.332-337
• /
• 2007

In the early twenty-first century, minimally invasive surgery is the mainstay of various kinds of surgical fields. Surgeons gave percutaneously surgical treatment of the screw directly using a fluoroscopic view in the past. The latest date, they began to operate the fractured carpal bone surgery using Computerized Tomography (CT). Carpal bones composed of wrist joint consist of eight small bones which have hexahedron and sponge shape. Because of these shape, it is difficult to grasp the shape of carpal bones using only CT image data. Although several image segmentation studies have been conducted with carpal bone CT image data, more studies about carpal bone using CT data are still required. Especially, to apply the software implemented from the studies to clinical fIeld, the outcomes should be user friendly and very accurate. To satisfy those conditions, we propose modified multi-seed region growing segmentation method which uses simple threshold and the canny edge detector for finding edge information more accurately. This method is able to use very easily and gives us high accuracy and high speed for extracting the edge information of carpal bones. Especially, using multi-seed points, multi-bone objects of the carpal bone are extracted simultaneously.

• 한국멀티미디어학회논문지
• /
• 제14권8호
• /
• pp.1010-1019
• /
• 2011

This was a preliminary research for the goal of understanding between internal structure of Osteogenesis Imperfecta Murine (OIM) bone and its fragility. 54 hyperspectral bone data sets were captured by using JASCO 2000 Raman spectrometer at UMKC-CRISP (University of Missouri-Kansas City Center for Research on Interfacial Structure and Properties). Each data set consists of 1,091 data points from 9 OIM bones. The original captured hyperspectral data sets were noisy and base-lined ones. We removed the noise and corrected the base-lined data for the final efficient classification. High dimensional Raman hyperspectral data on OIM bones was reduced by Principal Components Analysis (PCA) and Linear Discriminant Analysis (LDA) and efficiently classified for the first time. We confirmed OIM bones could be classified such as strong, middle and weak one by using the coefficients of their PCA or LDA. Through experiment, we investigated the efficiency of classification on the reduced OIM bone data by the Bayesian classifier and K -Nearest Neighbor (K-NN) classifier. As the experimental result, the case of LDA reduction showed higher classification performance than that of PCA reduction in the two classifiers. K-NN classifier represented better classification rate, compared with Bayesian classifier. The classification performance of K-NN was about 92.6% in case of LDA.

• Imaging Science in Dentistry
• /
• 제40권1호
• /
• pp.1-7
• /
• 2010

Purpose : The purpose of this study was to examine the significance of increased bone density according to whether bone grafts were applied using demographic data with Cone Beam Computed Tomography (CBCT) and to compare the bone densities between before and after implant prosthesis using the Hounsfield index. Materials and Methods : Thirty-six randomly selected computed tomography (CT) scans were used for the analysis. The same sites were evaluated digitally using the Hounsfield scale with V-Implant $2.0^{TM}$, and the results were compared with maxillary posterior bone graft. Statistical data analysis was carried out to determine the correlation between the recorded Hounsfield unit (HU) of the bone graft and implant prosthesis using a Mann-Whitney U test and Wilcoxon Matched-pairs test. Results : The bone grafted maxillary posterior teeth showed an increase in the mean values from-157 HU to 387 HU, whereas non-grafted maxillary posterior teeth showed an increase from 62 HU to 342 HU. After implantation, the grafted and non-grafted groups showed significantly higher bone density than before implantation. However, the grafted group showed significantly more changes than the non-grafted group. Conclusion : Bone density measurements using CBCT might provide an objective assessment of the bone quality as well as the correlation between bone density (Hounsfield scale) and bone grafts in the maxillary molar area.

• Nutrition Research and Practice
• /
• 제8권6호
• /
• pp.662-669
• /
• 2014

BACKGROUND/OBJECTIVES: Osteoporosis and osteoporosis-related disease are drawing a lot of attention in Korea as one of the serious health problems. Bone health status may be influenced by the general dietary quality and dietary pattern. SUBJECTS/METHODS: To determine the relationship between dietary quality and intake patterns and bone health status, the %RNI, NAR, DDS, and food group intake patterns were assessed according to their bone health status for 847 postmenopausal women using the 2010 KNHANES data after eliminating those of likely changing their diet under the advice of doctors or those taking estrogen. RESULTS: Bone health became worse as dietary quality deteriorated. All NAR and %RNI values were highly associated with bone health levels and the consumption frequency of Ca sources, DDS and the food group intake patterns also confirmed the findings. CONCLUSIONS: This study confirmed that dietary quality and dietary patterns were important for bone health. Nutritional education on eating foods from the five basic food groups has to be emphasized to prevent osteoporosis among older women.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제30권4호
• /
• pp.331-338
• /
• 2004

Stress transfer to the surrounding tissues is one of the factors involved in the design of dental implants. Unfortunately, insufficient data are available for stress transfer within the regenerated bone surrounding dental implants. The purpose of this study was to investigate the concentration of stresses within the regenerated bone surrounding the implant using three-dimensional finite element stress analysis method. Stress magnitude and contours within the regenerated bone were calculated. The $3.75{\times}10-mm$ implant (3i, USA) was used for this study and was assumed to be 100% osseointegrated, and was placed in mandibular bone and restored with a cast gold crown. Using ANSYS software revision 6.0, a program was written to generate a model simulating a cylindrical block section of the mandible 20 mm in height and 10 mm in diameter. The present study used a fine grid model incorporating elements between 165,148 and 253,604 and nodal points between 31,616 and 48,877. This study was simulated loads of 200N at the central fossa (A), at the outside point of the central fossa with resin filling into screw hole (B), and at the buccal cusp (C), in a vertical and $30^{\circ}$ lateral loading, respectively. The results were as follows; 1. In case the regenerated bone (bone quality type IV) was surrounded by bone quality type I and II, stresses were increased from loading point A to C in vertical loading. And stresses according to the depth of regenerated bone were distributed along the implant evenly in loading point A, concentrated on the top of the cylindrical collar loading point B and C in vertical loading. And, In case the regenerated bone (bone quality type IV) was surrounded by bone quality type III, stresses were increase from loading point A to C in vertical loading. And stresses according to the depth of regenerated bone were distributed along the implant evenly in loading point A, B and C in vertical loading. 2. In case the regenerated bone (bone quality type IV) was surrounded by bone quality type I and II, stresses were decreased from loading point A to C in lateral loading. Stresses according to the depth of regenerated bone were concentrated on the top of the cylindrical collar in loading point A and B, distributed along the implant evenly in loading point C in lateral loading. And, In case the regenerated bone (bone quality type IV) was surrounded by bone quality type III, stresses were decreased from loading point A to C in lateral loading. And stresses according to the depth of regenerated bone were distributed along the implant evenly in loading point A, B and C in lateral loading. In summary, these data indicate that both bone quality surrounding the regenerated bone adjacent to implant fixture and load direction applied on the prosthesis could influence concentration of stress within the regenerated bone surrounding the cylindrical type implant fixture.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권5호
• /
• pp.482-487
• /
• 2006

As the uses of dental implants are prevailing, the need for sinus bone graft is increasing. Deproteinized bovine bone mineral (DBBM) was not mentioned in 1996 Sinus Bone Graft because of the deficit of the available data. Since then, many clinical and laboratory reports support the use of DBBM in the sinus bone graft procedure. In this report, the histological and clinical successes of sinus bone grafting with DBBM is discussed with available literatures. After sinus bone grafts with DBBM, the proportion of new bone formed was similar or superior to natural maxillary posterior alveolar bone after healing period of 6 months to 1 year. It seems that the grafted DBBM is not be either resorbed nor replaced with bone, but this may not disturb the osseointegration of dental implants installed into it. The clinical survival rates of dental implants installed on the sinus grafted with DBBM was similar to those installed on the ungrafted posterior maxillary alveolar ridge or grafted with autogenous bone. So, it can be concluded that DBBM can be used successfully in the sinus bone graft.