• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.479-479
• /
• 2011

Flexible inverters based on complementary thin-film transistor (CTFTs) are important because they have low power consumption and other advantages over single type TFT inverters. In addition, integrated CTFTs in flexible electronic circuits on low-cost, large area and mechanically flexible substrates have potentials in various applications such as radio-frequency identification tags (RFIDs), sensors, and backplanes for flexible displays. In this work, we introduce flexible complementary inverters using pentacene and amorphous indium gallium zinc oxide (IGZO) for the p-channel and n-channel, respectively. The CTFTs were fabricated on polyimide (PI) substrate. Firstly, a thin poly-4-vinyl phenol (PVP) layer was spin coated on PI substrate to make a smooth surface with rms surface roughness of 0.3 nm, which was required to grow high quality IGZO layers. Then, Ni gate electrode was deposited on the PVP layer by e-beam evaporator. 400-nm-thick PVP and 20-nm-thick ALD Al2O3 dielectric was deposited in sequence as a double gate dielectric layer for high flexibility and low leakage current. Then, IGZO and pentacene semiconductor layers were deposited by rf sputter and thermal evaporator, respectively, using shadow masks. Finally, Al and Au source/drain electrodes of 70 nm were respectively deposited on each semiconductor layer using shadow masks by thermal evaporator. Basic electrical characteristics of individual transistors and the whole CTFTs were measured by a semiconductor parameter analyzer (HP4145B, Agilent Technologies) at room temperature in the dark. Performance of those devices then was measured under static and dynamic mechanical deformation. Effects of cyclic bending were also examined. The voltage transfer characteristics (Vout- Vin) and voltage gain (-dVout/dVin) of flexible inverter circuit were analyzed and the effects of mechanical bending will be discussed in detail.

• 분석과학
• /
• 제8권4호
• /
• pp.675-682
• /
• 1995

Thin films of buckminsterfullerene($C_{60}$) formed by solution drop casting on Pt foil electrode surfaces were studied by cyclic voltammetry(CV) in acetonitrile(MeCN) containing quaternary ammonium or alkali-metal salts as supporting electrolyte. The electrochemical behaviors of $C_{60}$ films are found to be strongly dependent on the nature of the supporting electrolytes, especially with tetrabutyl ammonium perchlorate (TBAP, $NBu_4ClO_4$), and tetrabutyl ammonium tetrafluoroborate ($TBABF_4$, $NBu_4BF_4$). Reasonably stable films are formed into which electrons can be injected. The interaction of $C_{60}$ film with the quaternary ammonium cation may produce the fulleride salts $(TBA^+)(C{_{60}}^-)$ and $(TBA^+)_2(C{_{60}}^{2-})$. The bulk electroreduction with a controlled potential to generate the soluble $C{_{60}}^{3-}$ anions(dark red-brown color) is followed by electrooxidative deposition to produce a neutral $C_{60}$ film on the surface. The peak currents($I_{pc}$ and $I_{pa}$) of these thin film were dramatically decreased with repetitive potential scanning. These results could be explained by the adsorption-desorption phenomena and ion pairing interaction of reduced species($C{_{60}}^-$, and $C{_{60}}^{2-}$) onto the electrode surface. The peak current changes and peak potential shifts of the thin $C_{60}$ film in cyclic voltammograms formed from solution were observed by varying scan rates.

• 센서학회지
• /
• 제4권1호
• /
• pp.3-8
• /
• 1995

ITO(indium tin oxide)와 PSL(porous silicon layer)을 이용하여 n-ITO/p-PSL 이종접합형 광검출 소자를 실리콘 기판상에 제조하였다. 실리콘 질화막과 Ni-Cr/Au를 이용하여 선택적으로 양극반응을 시켰으며, 각 소자를 메사구조로 정의하여 소자간을 격리하였고 ITO를 이용하여 소자의 열화문제를 억제시켰다. 제조된 소자에 백색광을 $0{\sim}3000Lux$까지 변화시키면서 얻은 I-V 특성으로부터 광전류가 입사된 광량에 선형적으로 비례함을 알았다. 제조된 소자는 약 -40V의 역방향 바이어스까지 안정되게 동작하였으며 암전류 밀도가 약 $40nA/mm^{2}$로 나타났다. Xe램프를 이용하여 $400nm{\sim}1100nm$까지 파장을 변화시키면서 측정한 결과 $600nm{\sim}700nm$사이에서 약 0.6A/W의 광응답을 나타내었다. 또한 제조된 소자는 3주 경과 후에도 거의 특성의 변화가 관찰되지 않았다.

• Journal of Biosystems Engineering
• /
• 제26권4호
• /
• pp.379-384
• /
• 2001

To enhance the smooth graft-taking of grafted seedlings, the excessive evapotranspiration from grafted seedlings just after grafting should be avoided. A measurement system of the evapotranspiration rate of grafted seedling under artificial lighting was set up to investigate the effect of physical environment on the evapotranspiration and graft-taking characteristics of grafted seedlings quantitatively. The evapotranspiration rate of grafted seedlings affected by relative humidity and light intensity were analyzed using the measurement system. The hypocotyl of watermelons (Citrullus vulgaris cv. Sweetdew, Hungnong Seed Co.) was slantly cut and then inserted into a hole on the stem of rootstock (Lagenaria siceraria cv. FR-King, Hungnong Seed Co.). Grafted seedlings were healed and joined for 5 days under cool-white fluorescent lamps (FL20SEX-d/18, Keumho Electric Co.) with photoperiod of 12h$.$d$\^$-1/ except dark period for one day after grafting in a closed graft-taking enhancement system developed by Kim(2000). The evapotranspiration rate and graft-taking of grafted seedling at air temperature of 23$\^{C}$ and air current speed of 0.1m$.$s$\^$-1/ was highly affected by relative humidity. But light intensity showed higher effect on the stem length of scion than relative humidity. In conclusion, it was suggested that relative humidity should be controlled at higher than 90% with photosynthetic photon flux of 50$\mu$mol$.$m$^2$$.$s$\^$-1/ to increase the survival of grafted seedlings and to produce healthy seedlings.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.399-402
• /
• 2002

This paper is researched that electric characteristic of Digital x-ray radiography technique with changing composition ratio of Iodine. Dopant material, Iodine is evaporated with amorphous selenium. Thorugh the old papers say, doponted Iodine will be down the created trap level because of Arsenic dopant material in amorphous selenium. Arsenic material of Composition ratio in amorphous selenium is fixed with 0.3% and test sample is deposited composition of 30, 100, 300, 500, 700ppm with thermal evaporate system. Experimental measurement is performed by dark current and x-ray sensitivity in amorphous selenium based radition detector sensor. Fabricated test sample thickness is $30{\mu}m$ and injected voltage is $3{\mu}m$，$6{\mu}m$，$9{\mu}m$ to both electrode. Experimental results showed that the net charge of composition rate of 30ppm is 398.88 pc/mR/$cm^2$ very high. And increase of the Iodine composition ratio is tendency to the decrease of net charge. Doping changing composition of Iodine in amorphous selenium detector offered to basical information of amorphous selenium material.

• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.687-694
• /
• 2015

A photoluminescence (PL) imaging method using a vision camera was employed to inspect InGaN/GaN quantum-well light-emitting diode (LED) epi-wafers. The PL image revealed dark spot defective regions (DSDRs) as well as a spatial map of integrated PL intensity of the epi-wafer. The Shockley-Read-Hall (SRH) nonradiative recombination coefficient increased with the size of the DSDRs. The high nonradiative recombination rates of the DSDRs resulted in degradation of the optical properties of the LED chips fabricated at the defective regions. Abnormal current-voltage characteristics with large forward leakages were also observed for LED chips with DSDRs, which could be due to parallel resistances bypassing the junction and/or tunneling through defects in the active region. It was found that the SRH nonradiative recombination process was dominant in the voltage range where the forward leakage by tunneling was observed. The results indicated that the DSDRs observed by PL imaging of LED epi-wafers were high density SRH nonradiative recombination centers which could affect the optical and electrical properties of the LED chips, and PL imaging can be an inspection method for evaluation of the epi-wafers and estimation of properties of the LED chips before fabrication.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2001년도 The 8th International Symposium
• /
• pp.20-33
• /
• 2001

A major portion of drugs used in Ayurvedic system of medicine which has been practiced since the early human civilization in Indian subcontinent were of plant origin. It should be noted that 70% of the population in this region depends on Ayurveda for their medical treatment and 60% of the drug resources are obtained from the Himalayan region. Therefore, Nepal becomes a potential source of plant drug resource since it occupies a major portion of the Himalaya. In the present paper, in general a current status of medicinal plant resources of Himalayan region especially Nepal will be discussed. In addition to this, a typical example of antidiabetic activity of Shilajit will be taken for the discussion. Shilajit is one of the crucial elements in several formulations including those of Rasayana, a therapy in Ayurveda, which has been practiced in the prevention of ageing and mental disorder. Although, Shilaiit is widely used for the treatment of diabetes, no satisfactory scientific reports are available up to now. The crude Shilajit in the market is a dark brown or black rock-like substance collected from the Himalayan region with a strong smell of cow's stale urine. In our studies, Shilajit (collected in the central Himalayan region) prevented the diabetes in nonobese diabetic (NOD) mice model. Shilajit also prevented the diabetes in the rats against the action of multiple low-dose (10 ㎎/㎏, i.v., 5 times) of streptozotocin. On the other hand, Shilajit did not show antioxidative activity. The preventive action of Shilajit on diabetes is mainly focused on the Th1 and Th2 cell activities, since Th2 cells activity was found to be significantly upregulated. Shilajit, however, showed a mild action in controlling the blood sugar level in young, old, and mild diabetic rats, but not in the severe diabetic rats. It also stimulated the nitric oxide production in macrophages. Based on these evidences, the antidiabetic activities of Shilajit appear to be immunomodulative probably by protecting or strengthening insulin-producing b-cells In the pancreas. further systematic research on constituents of Shilajit and its quality evaluation is necessary to enable the use of natural medicines in the treatment of diabetes.

• 한국의류산업학회지
• /
• 제15권5호
• /
• pp.834-840
• /
• 2013

This study aims to suggest practical considerations for designing protective clothing with increased visibility that will have higher user acceptance by law enforcement officers. Light-emitting diode(LED) patrol vests were visually and structurally assessed, and 125 police officers' responses from surveys about user acceptance of the vest were analyzed. The current LED patrol vest was designed for enhanced safety of police officers by increasing visibility in the dark. However, the user acceptance rate of the LED patrol vest indicates low use of and low satisfaction with the vest despite its enhanced safety features. In particular, differences in materials, design, functionality of the pockets and size of the vest depending on the hours worked, were statistically significant. The police officers' responses suggest areas of improvement in design, materials, ease of movement, size and functionality. Key issues include 'tactile discomfort'; 'impeded vision from the glare of the LED'; 'frequent malfunctions of the LED'; 'impossible repair of the broken LED units'; 'no user feedback'; 'inconvenient to replace batteries'; 'brittle materials' and 'unpleasing look'. To increase user acceptance, designer should incorporate context-awareness, a convenient user interface, a modular design approach, first responders' self-image as public servants in relation to their aesthetic perspectives of their uniforms, and scientific evaluation of the effectiveness of the intended functions of the clothing. Suggested implications for designing the LED patrol vest can be applied to designing other functional/protective clothing for intended end users with special needs.

• 패션비즈니스
• /
• 제24권1호
• /
• pp.1-14
• /
• 2020

Based on the trend of pluralization and globalization the collapse of national borders now is a manifestation of mixed and compromised cultures and societies. It is also emerging as a hybrid fashion in fashion. Hybrid fashion means creating a new image by mixing various cultures beyond the time and space. This study aims to analyze the current state of Chinese fashion design and present its direction by grasping the characteristics of hybrids in the works of rising Chinese fashion designers in the era of pluralization. The research method was literature review and empirical research. According to the selection criteria of new fashion designers, 6 new fashion designers of 5 fashion brands were selected and their total 458 points works were analyzed. The analysis results are as follows. First, most of the time trade-offs were 'past and present' trade-offs that express Chinese traditional culture and the image of the past with modern design. The trade-offs between 'present and future' is expressed by mixing print patterns, colors and light with fractal art. Second, spatial trade-offs was expressed in the way of expressing Chinese themes in the composition of western clothing, expressing the Western themes in oriental colors, and inspired by Japanese culture expressed by deconstructionism, Third, the gender mix mainly used dark embroidery on women's clothing, while the men's wear showed a delicate feminine charm with a surreal pattern on thin and transparent gauze fabric.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2009년도 춘계학술대회 논문집
• /
• pp.167-171
• /
• 2009

정지궤도에서는 세계 최초의 해양관측위성으로 개발된 정지궤도 해양위성(GOCI, Geostationary Ocean Color Imager)은 통신해양기상위성(COMS, Communication, Ocean and Meterological Satellite)의 탑재체로서 2009년말 발사 예정이다. 정지궤도 해양위성의 복사보정은 센서의 전기적 특성에 의한 잡음을 제거하기 위한 암흑전류 교정(Dark Current Correction)을 먼저 수행한 다음, 주운영지상국인 해양위성센터(KOSC, Korea Ocean Satellite Center)에서 수신된 위성의 원시자료의 Digital Number(DN)를 실제 해양원격탐사에서 이용하는 물리량인 복사휘도(Radiance, $W/m^2/{\mu}m/sr$)로 변환하는 복사보정을 수행한다. 정확도 높은 복사보정을 수행하기 위해서는 기준광원의 복사휘도와 센서의 물리적 특성을 정확하게 알아야 한다. 정지궤도 해양위성 궤도상 복사보정(on-orbit radiometric calibration)에서는 태양이 기준광원이기 때문에, 기준 태양복사모델(Thuillier 2004 Solar Irradiance Model)에서 지구-태양간 거리 변화(1년 주기)를 보정한 태양의 방사도 (Irradiance)를 이용하고, 태양입사각에 대한 태양광 확산기의 감쇄 특성 변화를 고려하여 센서에 입력되는 복사휘도를 계산한다. 센서의 물리적 특성으로 인한 복사보정의 오차를 줄이기 위해 우주방사선 및 우주먼지(space debris)로 인해 위성 운용기간 중 그 특성이 저하되는 태양광 확산기(solar Diffuser)의 특성변화를 모니터링하기 위한 DAMD(Diffuser Aging Monitoring Device)를 이용한다. 정지궤도 해양위성 주관운영기관인 한국해양연구원의 해양위성센터에서는 정지궤도 해양위성 복사보정을 수행하기 위한 S/W를 통신해양기상위성 자료처리시스템 개발사업의 일환으로 개발하였으며, 관련 성능 시험을 수행하고 있다.