• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.43-44
• /
• 2006

We have studied electro-optical characteristics and stability of liquid crystal director depending on electrode patterning of common electrode on top substrate in patterned vertical alignment (PVA) mode. In the present studies, new type of common electrode pattern was suggested to enhance a dark state by reducing interference area due to data signal. According to the simulation result, PVA device with new common electrode pattern contributed to Improvement of an aperture ratio.

• Journal of the Korean Ceramic Society
• /
• v.54 no.1
• /
• pp.28-32
• /
• 2017

The degradation of methyl blue (MB) catalyzed by platinum (Pt)-graphene/$TiO_2$ in dark ambiance was studied. Pt-graphene/$TiO_2$ composites were prepared by simple hydrothermal method. Characterizations of composites were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), specific surface area (BET) analysis, and energy dispersive X-ray (EDX) analysis. UV-spectroscopic analysis of the dyes was performed by measuring the change in absorbance. The degradation of the organic dyes was calculated based on the decrease in concentration of the dyes with respect to regular time intervals. Rate coefficients for the catalytic process were successfully established and reusability tests were performed to test the stability of the used catalysts.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.131-134
• /
• 2000

Electroluminescent[EL] from conjugated polymers has recently received great attention because polymer light-emitting diodes[LEDs] clearly have potential for applications such as large-area displays. The operation of polymer LEDs is based on double injection of electrons and holes from the electrodes, followed by formation of excitons whose radiative decay results in light emission at wavelength characteristic to the material In this paper, we fabricated the single layer EL device using poly(3-octylthiophene)[P3OT] as emitting material. The orange-red light was clearly visible in a dark room Maximum peak wavelength of EL spectrum saw at 640nm in accordance with photon energy 1.9eV. And we know that ionization energy of P3OT is 4.7eV from the cyclic voltammetry.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.1
• /
• pp.35-41
• /
• 2017

This study looks at optimizinge light redistribution to improve the overall illuminance uniformity of commercial IRED modules. To obtain uniform illumination over a prescribed rectangular area, a freeform surface lens was evaluated using TracePro. The LED light overall illuminance uniformity regulated in KSC 7658 was verified using Relux software. Experimental test results showed 0.81 overall illuminance uniformity for rectangular light distribution of LED lights having a radiation angle of $80^{\circ}$. After fabricating prototype IRED lights based on these simulation results, illuminance performance was observed when used as actual IRED lighting with a nighttime CCTV system. Image observation photographs of the prototype $80^{\circ}$ rectangular IRED lights confirmed that object images can be seen clearly owing to high overall illuminance uniformity, and that dark regions of the CCTV screen were not shown.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.171-171
• /
• 2000

We have developed m innovative surface inspection system for automated quality control for steel products in POSCO. We had ever installed the various kinds of surface inspection systems, such as a linear CCD and a laser typed surface inspection systems at cold rolled strips production lines. But, these systems cannot fulfill the sufficient detection and classification rate, and real time processing performance. In order to increase detection and classification rate, we have used the Dark, Bright and Transition Field illumination and area type CCD camera, and fur the real time image processing, parallel computing has been used. In this paper, we introduced the automatic surface inspection system and real time image processing technique using the Object Detection, Defect Detection, Classification algorithms and its performance obtained at the production line.

• Korean Journal Plant Pathology
• /
• v.10 no.4
• /
• pp.333-335
• /
• 1994

In 1991, the leaves and roots brown rot disease of scarlet kafir lily were found in Taejon and Seoul. The symptoms were appeared as dark-brown and water soaked on leaves. The discolored area of the leaves become halo. The roots revealed blight gray and water soaked. The pathogenic bacteria were isolated from the diseased leaves of the scarlet kafir lily were identified as Erwinia cypripedii on the bais of bacterial characteristics. E. cypripedii is first described bacteria which cause the disease on scarlet kafir lily in Korea. Therefore, we would like to propose to the name of scarlet kafir lily disease caused by E. cypripedii as“bacterial brown-rot of scarlet kafir lily”hereafter.

• Applied Microscopy
• /
• v.22 no.1
• /
• pp.128-142
• /
• 1992

Ultrastructure of the poison secreting organ in the spiders, Agelena limbata Thorell and Nephila clavata L. Koch were studied using scanning and transmission electron microscopes. The venom glands located its secretory sac portion in cephalothorax and excretory duct in the fang of chelicera are one pair of simple alveolar glands composed of three kinds of basic tissues-outer spiral musculature, middle myoepithelium and inner glandular epithelium. The muscle cells of the venom gland junctioned with the motor nerve endings at neuromuscular contact area are composed of smooth muscle fibers, whereas the myoepithelial cells between the musculature and inner glandular epithelium have compact collagenous fibers within the cytoplasm. The glandular epithelial cells which arranged along the concentrical location are subdivided into basal light cells and apical dark cells according to electron densities of their cytoplasms.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.2
• /
• pp.787-806
• /
• 2016

Traditional radio-based gesture recognition approaches usually require the target to carry a device (e.g., an EMG sensor or an accelerometer sensor). However, such requirement cannot be satisfied in many applications. For example, in smart home, users want to control the light on/off by some specific hand gesture, without finding and pressing the button especially in dark area. They will not carry any device in this scenario. To overcome this drawback, in this paper, we propose three algorithms able to recognize the target gesture (mainly the human hand gesture) without carrying any device, based on just Radio Signal Strength Indicator (RSSI). Our platform utilizes only 6 telosB sensor nodes with a very easy deployment. Experiment results show that the successful recognition radio can reach around 80% in our system.

• Fisheries and Aquatic Sciences
• /
• v.16 no.3
• /
• pp.195-197
• /
• 2013

One specimen of Chirolophis saitone, belonging to the family Stichaeidae, was collected by a bottom trawl in the southern area of the Yellow Sea. The present specimen was characterized by 52 dorsal fin spines, 38 anal fin spines, a caudal fin with four vertical dark bands and an orbital region with three pairs of branched cirri. We propose a new Korean name, "Jak-eun-goe-do-ra-chi', for C. saitone.

• Plant Resources
• /
• v.2 no.2
• /
• pp.65-68
• /
• 1999

This study was conducted to obtain the basic breeding information of Colocasia esculenta Schott. Effect of supplemental plant growth regulators and genotype difference were investigated on dormant bud tissue for proliferation. The plant regeneration ratio, plant height and root length were the best upon mixed treatment of 0.8mg/L IAA and 2.0mg/L zeatin. Both leaf weight and root weight were heavy upon culture in a dark condition. The leaf and root weights were heaviest in 6Pie sucrose concentrations. In several collected area the heaviest one was Binnangxin and then in the order of Suwon, Wanju and Puan. Genotype differences of tuber diameter and tuber weight were found in Suwon. Tuber weight was found in the order of Suwon (862mg) >Wanju(723mg) >Puan(649mg) >Binnangxin (424mg).