• 대한디지털의료영상학회논문지
• /
• 제13권3호
• /
• pp.105-109
• /
• 2011

With the development of medical technologies and the growth of household incomes, most of the people have become to be interested in health as it leads to significant early detection and cure of diseases. However the pattern of disease becomes diverse and it makes the imaging diagnosis department crowded with many patients. Therefore the opportunistic infection could be serious there. The hospital becomes the place which provides high risks of infection danger but it is true that the opportunistic infection of the hospital employees is not still recognized well. The imaging diagnosis department has developed a lot but it becomes the medium of secondary infection of patients and employees. So this study analyzesthe status of bacteria infection of the examination table, the handle of diagnostic equipment and the hands of radiation staffs in imaging diagnosis department of the general hospitals and individual ones. And the result shows that some bacteria were found even though it's little. We are trying to make the hospitals to be free of secondary infection securing safety measure to prevent the secondaryinfection from occurring to patients and hospital employees.

• 천문학회보
• /
• 제40권1호
• /
• pp.66.2-66.2
• /
• 2015

In today's age when telecommunications using satellite has become part of our daily lives, one has to be employ preventive measures to avert any possible danger, of which solar activity is the major cause. Coronal mass ejections (CMEs) heading towards the Earth can lead to disturbances in the Earth's magnetosphere, if their magnetic field is oriented southward. Monitoring of solar filaments in this case becomes very very crucial, as their eruption is associated with most of the CMEs. Monitoring of solar filaments in this case becomes very very crucial, as their eruption is associated with most of the CMEs. Also, filaments show activation up to a few hours prior to launch of a CME and thus can provide advance warning. In this study, we present an algorithm for the detection of solar filaments seen in the extreme ultraviolet (EUV) from Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO). Various morphological operations are employed to identify and extract the filaments. These filaments are then tracked in order to determine their size and location continuously.

• 한국군사과학기술학회지
• /
• 제18권3호
• /
• pp.283-292
• /
• 2015

This paper presents the development of the automatic safety inspection technique for the ammunition fuzes using radiography images. The technique inspects 49-ammunition fuze by detecting the X-ray or neutron radiographic images to check whether the fuze is unintendedly armed or/and some major assembled parts are at right place. To execute the program, we loads the image(s) for under test. After reading images, the program conducts a series of pre-image processing, and then starts inspecting input images by using the detection algorithms which are designed distinctively for each fuze. After completing the detection process, the program displays the final result of the fuze status: "safety or danger." Through this program, we can cut off the fuzes which have any doubt about safety, and can only provide absolutely safe fuzes, compared with the current naked eye inspection method.

• 한국자동차공학회논문집
• /
• 제25권3호
• /
• pp.309-316
• /
• 2017

In shuttle vans designed to transport children, the recognition of a child's approach and departure is very important. Ultrasonic sensors are generally used for a short distance around a vehicle. Although ultrasonic sensors are cheaper than other ADAS sensors, the number of sensors installed in a van should be optimized. In order to recognize the presence of a child around a shuttle van, this paper proposes the placement of ultrasonic sensors in the van. Considering the turning radius of the van and the distance from each sensor to a child, collision risk is classified as 'safe', 'warning', and 'danger'. The sensor placement and the recognition algorithm are verified in a virtual driving environment.

• 제어로봇시스템학회논문지
• /
• 제11권7호
• /
• pp.595-601
• /
• 2005

A mobile robot system utilizing NDT (Non-Destructive Testing) method is designed and fabricated f3r automatic integrity evaluation of large sized industrial reservoirs and pipelines. The developed mobile robot can crawl over the outer surface of the industrial facilities even though the shape of the structures is various and unsymmetric. The robot detects defects such as pinholes, cracks and thickness reduction at the wall of the facilities using EMAT (Electro-Magnetic Acoustic Transducer). Image processing technology for weld line detection at the surface of the target and host programs including defect detecting algorithms are also developed. Automation of defect detection for these kinds of large facilities using mobile robots is helpful to prevent significant troubles of the structures without danger of human beings under harmful environment.

• Journal of Hydrospace Technology
• /
• 제1권1호
• /
• pp.75-88
• /
• 1995

Auto-Pilot System uses heading angle information via the position sensor and the rudder device to control the ship's direction. Most of the control logics are composed of the state estimation and control algorithms assuming that the measurement device and the actuator have no fault except the measurement noise. But such asumptions could bring the danger in real situation. For example, if the heading angle measuring device is out of order the control action based on those false position information could bring serious safety problem. In this study, the control system including improved method for processing the position information is applied to the Auto-Pilot System. To show the difference between general state estimator and F.D.F., BJDFs for the sensor and the actuator failure detection are designed and the performance are tested. And it is shown that bias error in sensor could be detected by state-augmented estimator. So the residual confined in the 2-dimension in the presence of the sensor failure could be unidirectional in output space and bias sensor error is much easier to be detected.

• 한국가스학회지
• /
• 제16권6호
• /
• pp.107-114
• /
• 2012

화재감지 시스템은 화재발생 시 위험 감지 및 전파를 위해 사용되고 있는데, 현재 사용 중인 대부분의 화재감지 시스템은 실보와 비화재보의 가능성으로부터 오동작이 빈번하게 발생한다. 본 연구에서는 화재감지의 신뢰성 개선을 위해 열 감지기, 연기 감지기 및 일산화탄소 농도 감지기의 3가지 독립정보를 통합적으로 이용하여 화재를 감지하는 알고리즘을 제안하고, LabVIEW를 이용하여 test bed를 구축하여 검증하였다. 즉, NIST의 Fire Research Division에서 제공하는 상황별 센서 측정 데이터를 이용하여 시뮬레이션을 진행하였으며, 실보와 비화재보의 가능성을 저감시키는 것을 확인할 수 있었다.

• 한국산학기술학회논문지
• /
• 제14권5호
• /
• pp.2430-2436
• /
• 2013

본 논문에서는 교차로 내에 위험의 원인이 되는 정지 객체를 검지하는 방법을 제안한다. 교차로 내에 설치된 CCTV에서 실시간 영상을 입력받아 객체의 크기를 일정하게 하기 위하여 역원근변환을 수행하였다. 원근변환된 영상에서 검지영역을 설정하고 객체의 이동 정보를 이용한 적응적인 배경영상을 생성하였다. 정지한 객체의 검출은 배경영상 차이법을 사용하여 정지한 객체의 후보 영역을 검출하였다. 검출된 후보 영역의 진위 여부를 파악하기 위하여 영상의 기울기 정보와 EHD(Edge Histogram Descriptor)를 이용하는 방법을 제안한다. 제안한 알고리즘의 성능을 알아보기 위하여 교차로에 설치된 DVR을 통해 출퇴근 시간 및 주간 대의 영상을 저장하여 실험하였다. 실험 결과 교차로 내의 검지영역 내에 정지한 차량을 효율적으로 감지할 수 있었으며 검지영역의 면적에 따라 초당 13~18프레임의 처리속도를 나타내어 실시간 처리에 문제가 없을 것으로 판단된다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권8호
• /
• pp.2209-2221
• /
• 2023

As the supply of electric vehicles increases, research on wireless charging methods for convenience has been increasing. Because the electric vehicle wireless transmission device is installed on the ground and the electric vehicle battery is installed on the floor of the vehicle, the transmission and reception antennas are approximately 15-30 cm away, and thus strong magnetic fields are exposed during wireless charging. When a metallic foreign object is placed in the magnetic field area, an eddy current is induced to the metallic foreign object, and heat is generated, creating danger of fire and burns. Therefore, this study proposes a method to detect metallic foreign objects in the magnetic field area of a wireless electric vehicle charging system. An active detection-only coil array was used, and an LC resonance circuit was constructed for the frequency of the supply power signal. When a metallic foreign object is inserted into the charging zone, the characteristics of the resonance circuit are broken, and the magnitude and phase of the voltage signal at both ends of the capacitor are changed. It was confirmed that the proposed method has about 1.5 times more change than the method of comparing the voltage magnitude at one node.

• Journal of Information Processing Systems
• /
• 제12권3호
• /
• pp.422-435
• /
• 2016

Despite the convenience brought by the advances in web and Internet technology, users are increasingly being exposed to the danger of various types of cyber attacks. In particular, recent studies have shown that today's cyber attacks usually occur on the web via malware distribution and the stealing of personal information. A drive-by download is a kind of web-based attack for malware distribution. Researchers have proposed various methods for detecting a drive-by download attack effectively. However, existing methods have limitations against recent evasion techniques, including JavaScript obfuscation, hiding, and dynamic code evaluation. In this paper, we propose an emulation-based malicious webpage detection method. Based on our study on the limitations of the existing methods and the state-of-the-art evasion techniques, we will introduce four features that can detect malware distribution networks and we applied them to the proposed method. Our performance evaluation using a URL scan engine provided by VirusTotal shows that the proposed method detects malicious webpages more precisely than existing solutions.