• 대한기계학회논문집A
• /
• 제35권7호
• /
• pp.773-778
• /
• 2011

포신과 같은 충격하중을 받는 파이프 형태의 구조물 진동을 측정하기 위해 가속계가 널리 사용된다. 포약의 폭발로 인해 발생하는 응력파는 포신의 횡진동에 미미한 영향을 미치지만 매우 큰 가속도 성분을 가지고 있어 미세 진동의 계측을 어렵게 한다. 기계적 필터는 가속도계를 부착하는 기계적 구조물과 진동감쇠재료로 구성되어, 고주파의 응력파를 제거하고 횡진동에 관련된 가속도 성분만을 가속도계로 전달하는 역할을 한다. 진동감쇠재료는 비선형성이 강하여 수학적 모델링이나 수치적 해석에 어려움이 있다. 본 논문에서는 9 가지의 진동감쇠재료의 진동특성을 실험적으로 확인하여, 기계적 필터에 가장 적합한 재료를 선택하였다. 또한, 압착에 따른 진동특성의 변화를 통해, 기계적 필터의 설계 데이터를 얻을 수 있었다. 기계적 필터를 설계 제작하여, 필터의 성능을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제88권3호
• /
• pp.221-238
• /
• 2023

This paper developed and examined a novel passive vibration isolator (i.e., "X-inerter") motivated by combining a bio-inspired structure and a rack-pinion inerter. The bio-inspired structure provided nonlinear stiffness and damping owing to its geometric nonlinearity. In addition, the behavior was further enhanced by a gear inerter that produced a special nonlinear inertia effect; thus, an X-inerter was developed. As a result, the X-inerter can achieve both high-static-low-dynamic stiffness (HSLDS) and quasi-zero stiffness (QZS), obtaining ultra-low frequency isolation. Furthermore, the installed inerter can produce a coupled nonlinear inertia and damping effect, leading to an anti-resonance frequency near the resonance, wide isolation region, and low resonance peak. Both static and dynamic analyses of the proposed isolator were conducted and the structural parameters' influence was comprehensively investigated. The X-inerter was proven to be comparatively more stable in the ultra-low frequency than the benchmarking QZS isolator due to the nonlinear damping and inertia properties. Moreover, the inertia effect could suppress the bio-inspired structure's super- and sub-harmonic resonance. Therefore, the X-inerter isolator generally possesses desirable nonlinear stiffness, nonlinear damping, and unique nonlinear inertia, designed to achieve the ultra-low natural frequency, the anti-resonance property, and a wide isolation region with a low resonance peak.

• 한국산학기술학회논문지
• /
• 제17권5호
• /
• pp.601-611
• /
• 2016

최근 빈번하게 발생하는 크고 작은 지진에 대비하여 구조물의 지진에 대한 안전성을 확보하기 위한 방안으로 지진격리시스템을 이용한 연구개발과 사용이 점차 증가하고 있다. 지진격리시스템의 하나인 고감쇠 고무받침(HDRB)는 특수한 고감쇠 고무(HDR)를 이용한 적층형 고무받침으로서 유사 지진격리장치인 납 고무받침에 비해 감쇠기능이 다소 떨어지는 단점이 있어 활용도가 높지 않았다. 그러나, 고감쇠 고무받침은 재료와 형상이 유사한 천연고무받침의 비해 우수한 감쇠력을 가지고 있으며 기존 납 고무받침의 경우 납의 유해성이 문제되어 납을 사용하지 않은 고감쇠 고무받침에 대한 연구가 증가하고 있다. 본 연구에서는 고감쇠 고무받침을 대상으로 압축응력 의존성 및 주파수 의존성, 반복하중 의존성 등 다양한 특성에 대하여 실험을 실시하였다. 그리고 여러 계기지진파 상태에서 고감쇠 고무받침의 내진성능을 평가하기 위해 진동대 실험과 분석을 수행하였다. 축소교량에 고감쇠 고무받침을 적용한 모델을 사용했고, 지진격리와 비 지진격리로 구분하여 진행하였다. 그 결과 고감쇠 고무받침을 적용할 경우 비 지진격리의 경우에 비해 높은 감쇠효과를 보였으나 Mexico City와 같은 연약지반의 구조물에 지진격리를 적용할 경우 오히려 구조물의 응답이 증가하는 양상을 나타내 지진격리장치 적용성에 주의해야 할 것으로 판단된다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 춘계 학술발표회 논문집
• /
• pp.367-372
• /
• 2002

In these days, The base isolation system is often used to improve the seismic capacity of the structures instead of conventional techniques of strengthening the structural members. The purpose of this study is to evaluate dynamic properties and mechanical characteristics of the 10tonf-LRB(Lead-Rubber Bearing). Experimental studies were performed to obtain the hysteretic behavior, effective shear stiffness( $K_{eff}$), equivalent damping( $H_{eq}$ ), capacity of energy dissipation( $W_{D}$) of six 10tonf-LRB. Especially, in this study, the response of the LRB for high loading frequency(0.5Hz~3.0Hz) was estimated. The effective shear stiffness of the LRB decreases and the capacity of energy dissipation increases as the shear strain amplitude increases. But the shear behavior of the LRB is not affected sensitively by loading frequency.y.y.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.187-189
• /
• 2002

This paper presents property of the squeeze mode type mount using Magneto-Rheological fluid(MR fluid). The mount can isolate multi-directional vibrations, and also effectively reduce the vibrations in a wide range of disturbance frequencies by controlling the applied magnetic field. The shape of the mount is the same that of squeeze film damper. In the present work, the performance of this mount was experimentally investigated according to changing the magnetic field strength.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.325.1-325
• /
• 2002

This paper presents property of the squeeze mode type mount using Magneto-Rheological fluid (MR fluid). The mount can isolate multi-directional vibrations, and also effectively reduce the vibrations in a wide range of disturbance frequency by controling the applied magnetic field. The shape of the mount is the same that of squeeze film damper. In the present work, the performance of this mount was experimentally investigated according to changing the magnetic field strength. (omitted)

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.165-170
• /
• 2011

A large number of seismic isolation systems have been developed since the early 1970s. They are basically a combination of elastomeric bearing and energy dissipators. The investigation described in this paper analyzes shear property and the frequency dependence of Lead Rubber Damper(LRD). Lead Rubber Damper is similar in shape and performance property to Lead Rubber Bearing. Experimental condition ranges from 20 to 200% in share strain and from 0.1 to 1.0Hz in frequency. When the shear strain is increased, effective stiffness and damping ratio are decreased. When the frequency is increased, change of the behavior characteristic is subtle.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 추계학술대회논문집; 한국과학기술회관, 8 Nov. 1996
• /
• pp.217-223
• /
• 1996

A structure's vibration characteristic is determined by modal property of the system. Through proper vibration analysis or experiments, the structure can be modified to reduce of vibration and noise. This paper is concerned with the natural frequency and modal loss factor of sandwich plates with viscoelastic core. The effects of shear and normal strain in the viscoelastic layer are investigated on modal properties, natural frequency and modal loss factor, by changing geometry parameter and viscoelastic material property of sandwich plates. The errors of modal parameters resulting from neglecting the extension or compression in the core material for simply supported(S-S-S-S) case are compared with those for clamped(C-C-C-C) boundary condition. Finite difference method(FDM) is utilized as numerical analysis technique of square sandwich plates for fixed boundary conditions. In order to reduce computation time and increase accuracy, improved finite difference expression with fourth order truncation error was used.

• Structural Engineering and Mechanics
• /
• 제87권4호
• /
• pp.363-373
• /
• 2023

Since the first family of structure-dependent methods can simultaneously integrate unconditional stability and explicit formulation in addition to second order accuracy, it is very computationally efficient for solving inertial problems except for adopting auto time-stepping techniques due to no nonlinear iterations. However, an unusual stability property is first found herein since its unconditional stability interval is drastically different for zero and nonzero damping. In fact, instability might occur for solving a damped stiffness hardening system while an accurate result can be obtained for the corresponding undamped stiffness hardening system. A technique of using a stability factor is applied to overcome this difficulty. It can be applied to magnify an unconditional stability interval. After introducing this stability factor, the formulation of this family of structure-dependent methods is changed accordingly and thus its numerical properties must be re-evaluated. In summary, a large stability factor can result in a large unconditional stability interval but also lead to a large relative period error. As a consequence, a stability factor must be appropriately chosen to have a desired unconditional stability interval in addition to an acceptable period distortion.

• Elastomers and Composites
• /
• 제46권4호
• /
• pp.311-317
• /
• 2011

자기장 응답 입자를 효율적으로 배향시킬 수 있는 네오디뮴 자석이 삽입된 몰드가 제시되었다. 입자 배향 공정을 통해 이방성 자기유변 탄성체가 제조되었으며 입자의 최적 첨가량은 30 vol.% 였다. 입자 배향성이 증가할수록 자기유변 탄성체의 인장강도는 감소하고 경도는 증가하였다. FFT 분석기를 통해 측정된 최대 자기유변 특성은 30 vol.%의 자기장 응답 입자를 포함한 자기유변 탄성체에서 나타났으며 인가전류 3 A에서 최대 59%의 전단 모듈러스 변화율을 나타내었다. 또한 인가전류와 자기장 응답 입자의 첨가량이 증가할수록 자기유변 탄성체의 전달성은 감소하였고 흡수 주파수 영역은 증가하여 우수한 댐핑 특성을 나타내었다.