• Conservation Science in Museum
• /
• v.6
• /
• pp.17-29
• /
• 2005

Excavated costumes included clothing that had been buried together with the corpse and shroud and unearthed during the excavation or the process transferring the tomb. The remains may easily get damaged under a different condition from the burial place, having gone through the deterioration process together with the corpse. In particular, since they are vulnerable to microbial propagation, suitable storage and conservation treatment immediately after excavation are required. Although more of them are unearthed in various parts of the country owing to exponential land development activities, they are rarely preserved properly due to a lack of appreciation of their value and a dearth of expert. Therefore, scientific examination and emergency preservation measures for the excavated costumes shall be described.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.2
• /
• pp.273-278
• /
• 2016

In order to evaluate the lifespan of high-temperature parts with thermal barrier coating in gas turbines used for power generation, this study was performed on an 80 MW-class gas turbine exceeding 24 k equivalent operating hours. Degradation characteristics were evaluated by analyzing the YSZ (Yttria Stabilized Zirconia) top coat, which serves as the thermal barrier coating layer, the NiCrAlY bond coat, and interface layers. Microstructural analysis of the top, middle, and bottom sections showed that Thermal Growth Oxide (TGO) growth, Cr precipitate growth within the bond coat layer, and formation of diffusion layer occur actively in high-temperature sections. These microstructural changes were consistent with damaged areas of the thermal barrier coating layer observed at the surface of the used blade. The distribution of Cr precipitates within the bond coat layer, in addition to the thickness of TGO, is regarded as a key indicator in the evaluation of degradation characteristics.

• Journal of the East Asian Society of Dietary Life
• /
• v.26 no.3
• /
• pp.215-222
• /
• 2016

This study was carried out to investigate the antimicrobial and anti-inflammatory activities of ethanol extract from Glycyrrhizae radix (GR) and ethanol extract from Glycyrrhizae radix cultured with Paecilomyces japonica mycelium (GRPM). Antimicrobial activity was measured by paper disc diffusion assay and minimum inhibitory concentration (MIC). Anti-inflammatory activity was evaluated by measurement of NO production in LPS-stimulated RAW264.7 cells. For the results of the paper disc diffusion assay, GRPM showed high antimicrobial activities against Bacillus cereus, Listeria monocytogenes, and Staphylococcus aureus. In addition, the MIC of GRPM (100 ppm) was lower than that of GR (200 ppm) against L. monocytogenes. When the morphology of L. monocytogenes treated with GRPM was observed using a FE-SEM, the surface of cells treated with GRPM were damaged, and some parts of the cell wall were destroyed. The inhibitory effect on NO production in LPS-stimulated RAW264.7 cells was significantly increased by GRPM treatment. In conclusion, GRPM is superior to GR in terms of antimicrobial and anti-inflammatory activities.

• Journal of the Korean Ceramic Society
• /
• v.53 no.6
• /
• pp.700-706
• /
• 2016

Etch rate, surface roughness and microstructure as plasma resistance were evaluated for six kinds of oxide glass with different compositions. Borosilicate glass (BS) was found to be etched at the highest etch rate and zinc aluminum phosphate glass (ZAP) showed a relatively lower etch rate than borosilicate. On the other hand, the etching rate of calcium aluminosilicate glass (CAS) was measured to be similar to that of sintered alumina while yttrium aluminosilicate glass (YAS) showed the lowest etch rate. Such different etch rates by mixture plasma as a function of glass compositions was dependent on whether or not fluoride compounds were formed on glass and sublimated in high vacuum. Especially, in view that $CaF_2$ and $YF_3$ with high sublimation points were formed on the surface of CAS and YAS glasses, both CAS and YAS glasses were considered to be a good candidate for protective coating materials on the damaged polycrystalline ceramics parts in semi-conductor and display processes.

• Korean journal of applied entomology
• /
• v.30 no.3
• /
• pp.174-179
• /
• 1991

Patterns of ginseng damage by larvae of Holotrichia diomphalia Bates in spring were investigated in 3rd year ginseng fields from 1986 to 1990. Ginseng damages were more serious in outer areas than inner areas of ginseng fields, which seemed to be due to nocturnal migration behavior of adult females. Damaged parts of 3rd year ginseng plants due to 3rd instar larvae were top, middle, bottom or whole of main roots, and rarely underground stems. Mean inhabitation depth of 3rd instar larvae were 3.2cm, 5.6cm, 6.6cm and 4.9cm in 1st, 2nd and 3rd year ginseng fields and mugwort fields, respectively. Larval feeding damage of ginseng in spring oc¬curred mainly from mid-May to early July and appeared to decrease temporarily when rainfalls increased.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.65-73
• /
• 2012

We studied the risk analysis of fire and explosion caused by gas leak in underground-parking of gas vehicle. However, an entrance regulation of gas vehicles (H2/LPG/CNG etc.) to underground garages has not been enacted in Korea. Incase, a gas explodes in an underground parking garage placed in overcrowded residential area, such as an apartment, the scale of the damage would cause tremendous disaster. Faults of vehicle parts and management problems were evaluated by using the Failure mode and effect analysis (FMEA), which is a qualitative analysis method. The range of the damaged area by the explosion and the damage scale by the explosion pressure were analyzed by using the process hazard analysis software tool (PHAST). The study is expected to facilitate enactment of the regulation for the underground parking to restrict the gas vehicle.

• The Research Journal of the Costume Culture
• /
• v.10 no.6
• /
• pp.718-734
• /
• 2002

The purpose of this study is to provide basic data f3r improvement in Working Uniform in both scientific and efficient ways. The study were enforced by questionnaire and personal interview. The subject of the survey were the workers of 264 in mechanic industry in Seoul. The results obtained from the researches by methods above are as follows. 1. In general, Working Uniform could be classified types of two. One is loose-fitting one-piece garment covering the body and legs, the other is two-piece garment. The latter is a jacket with either sports collar or soutein collar, fastened with either buttons or a zipper and its sleeve is finished by cuffs and tapes. Regarding to color. inkblue, dark navy, khaky, dark beige are favourable ones. 2. In regard to the necessity of uniform that workers suppose, most of them were aware of it and agreed wearing uniform could play an important part. The reason why are on the basis of safety-first and work efficiency and also to protect a body from harmful or toxic dirt specially in machinery workplace. 3. The purpose of wearing an uniform according to statistics of population make some difference in age, gender. categories of industry, and the scale of factory. 4. In regard to care of uniform, front hem, edge of sleeve in a jacket, and knee, hip part in pants were most vulnerable spots for dirt. The parts damaged easily are edge of sleeve in a jacket and a zipper in pants. On the average, laundry have been done by water and was once a week frequency.

• Journal of the Korean Society of Safety
• /
• v.26 no.5
• /
• pp.7-12
• /
• 2011

The crash cushion has drawn a great attention because of its versatility, efficiency and simplicity in reducing the mortality and damages from traffic accidents. However, the existing cushion systems are high priced or have limited functions. The purpose of the study was to devise an improved crash cushion which can offer higher safety compared to the available ones at present. In addition, the conformity of the cushion with the facility standards was assessed through computer simulation for collision with vehicles. The novel cushion system adopts the used tires as shock absorber, which can not only secure cushioning effect but also reduce the production cost. Moreover, it is highly durable and easy to maintain and repair the damaged parts. According to the simulation using BARRIER VII program, the novel cushion system showed PHD of 17.4 g and 10.1 g for a frontal collision and a side collision, respectively. Based on the results, it could be concluded that the novel cushion system met the test standards in the guideline for road safety facility installation and management.

• Journal of information and communication convergence engineering
• /
• v.9 no.4
• /
• pp.358-362
• /
• 2011

The National Emergency Management Agency of South Korea has established a Disaster Victims Psychology Support Center. The Disaster Victims Psychology Support Center can enable victims who got psychological damage from disasters to return to their daily lives through healing activity, field visits and advice of experts. The previous Psychology Support Center System managed the information of disaster victims through an independent database. However, this paper proposes a system that is developed to identify medical institutions and mental health centers within a distance of radius, based on the potential Hot-Spot areas of disaster victims using the GIS Systems. The proposed system can efficiently support selection of appropriate institutions for disaster victims using their location and age, classification of damage, and damaged parts of the body. Also, this spatial analysis can assist to decide on a policy based on the location of disaster victims and the extent of damage. Therefore, this paper can provide the required information to support decision making based on the concentrated areas for disaster victims.

• Korean Journal of Metals and Materials
• /
• v.48 no.7
• /
• pp.651-659
• /
• 2010

When high-speed interrupted cutting is carried out for die and mold steels with high hardness, CBN tools manifested a significantly longer wear life than carbide, ceramic, or cermet tools in an experiment of face milling characteristics. In addition, it was also found that they secured a stable surface roughness within a range of 1.6 S~6.3 S, an acceptable range for precision machining for polished machining parts. And it makes them acceptable in the precision machining field, except in industries where very high machining accuracy is required. In the high hardness interrupted cutting, it was advantageous to perform a negaland treatment and a honning treatment on the tools' cutting edge to extend tool life and surface roughness. Also, severe crater development was found on the sloped face in CBN tools following high-speed machining. This caused the cutting edge to be weakened and damaged, and ultimately resulted in a shorter tool life. Finally, as a result of EDX mapping inspection, Cr component was detected evenly on the entire crater wear area, which can be included only in STD 11.