• Convergence Security Journal
• /
• v.23 no.3
• /
• pp.29-36
• /
• 2023

With the recent surge in exposure to fake advertising phishing sites in search engines, the damage caused by poor search quality and personal information leakage is increasing. In particular, the seriousness of the problem is worsening faster as the possibility of automating the creation of advertising phishing sites through tools such as ChatGPT increases. In this paper, the source code of fake advertising phishing sites was statically analyzed to derive structural commonalities, and among them, a detection crawler that filters sites step by step based on foreign domains and redirection was developed to confirm that fake advertising posts were finally detected. In addition, we demonstrate the need for new guide lines by verifying that the redirection page of fake advertising sites is divided into three types and returns different sites according to each situation. Furthermore, we propose new detection guidelines for fake advertising phishing sites that cannot be detected by existing detection methods.

• Journal of Korean Association for Spatial Structures
• /
• v.24 no.1
• /
• pp.47-55
• /
• 2024

The aim of this study is to evaluate the possibility of damage to cultural assets resulting from vibrations generated by construction vehicle traffic. The cultural heritage's natural vibration frequency was determined to be 150Hz by measurement. The damping ratios were calculated as 4.7% using the logarithmic decrement approach and 4.3% using the half-power method. The vibration measurements obtained during vehicle operation indicated that, despite an increase in vehicle velocity of up to 15 km/h, the vibrations remained below the detectable level of 0.13 mm/sec. When the road is curved and the terrain is sloped, a suitable speed for vehicle operation was found to be around 17 km/h, at which point vibrations were seen. The highest recorded vibration amplitude at this velocity was 0.217 mm/sec, which remains below the stringent regulation limit of 2 mm/sec. Thus, it can be concluded that there is no actual harm caused by vibrations.

• Annals of Occupational and Environmental Medicine
• /
• v.35
• /
• pp.34.1-34.8
• /
• 2023

Background: Hydrogen sulfide is a toxic substance that humans can be exposed to occupationally, and cases of hydrogen sulfide poisoning of workers in industrial sites are commonly reported. However, there have been no cases of poisoning of the public due to an unauthorized discharge of wastewater, so it is important to describe this incident. Case presentation: In a small village in Jeollanam-do, Republic of Korea, accounts of a terrible stench had been reported. A 26-year-old man who lived and worked in a foul-smelling area was taken to the emergency room with a headache, dizziness, nausea, and repeated syncope. A subsequent police and Ministry of Environment investigation determined that the cause of the stench was the unauthorized discharge of 9 tons of wastewater containing hydrogen sulfide through a stormwater pipe while the villagers were sleeping. The patient had no previous medical history or experience of symptoms. Leukocytes and cardiac markers were elevated, an electrocardiogram indicated biatrial enlargement, left ventricular hypertrophy, and corrected QT interval prolongation. Myocardial hypertrophy was detected on a chest computed tomography scan, and hypertrophic cardiomyopathy was confirmed on echocardiography. After hospitalization, cardiac marker concentrations declined, symptoms improved, and the patient was discharged after 7 days of hospitalization. There was no recurrence of symptoms after discharge. Conclusions: We suspect that previously unrecognized heart disease manifested or was aggravated in this patient due to exposure to hydrogen sulfide. Attention should be paid to the possibility of unauthorized discharge of hydrogen sulfide, etc., in occasional local incidents and damage to public health. In the event of such an accident, it is necessary to have government guidelines in place to investigate health impact and follow-up clinical management of exposed residents.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.4
• /
• pp.374-381
• /
• 2024

This paper delves into the application of the short-wave infrared (SWIR) region, with a focus on the synthesis and optical characteristics of silver sulfide (Ag₂S) nanostructures. SWIR offers advantages such as reduced damage to biological tissues and enhanced optical transparency, making it valuable across various domains. The study introduces three distinct synthesis methods, each showcasing the ability to obtain nanostructures with improved optical properties. These research findings open up the possibility of providing tailored solutions in detection, imaging, and other applications by controlling the size and ligands of Ag₂S nanoparticles. This paper provides new insights into the utilization of Ag₂S in the SWIR region, which is expected to foster advancements in future technologies.

• Structural Engineering and Mechanics
• /
• v.89 no.6
• /
• pp.617-626
• /
• 2024

The study investigated the behavior of plain and fibered Ultra-High Performance Concrete (UHPC) beams under varying loading conditions using integrated analysis of the flexure and acoustic emission tests. The loading rate of testing is -0.25 -2 mm/min. It is observed that on increasing loading rate, flexural strength increases, and toughness decreases. The acoustic emission testing revealed that higher loading rates accelerate crack propagation. Fiber effect and matrix cracking are identified as significant contributors to the release of acoustic emission energy, with fiber rupture/failure and matrix cracking showing rate-dependent behavior. Crack classification analysis indicated that the rise angle (RA) value decreased under quasi-static loading. The average frequency (AF) value increased with the loading rate, but this trend reversed under rate-dependent conditions. K-means analysis identified distinct clusters of crack types with unique frequency and duration characteristics at different loading rates. Furthermore, the historic index and signal strength decreased with increasing loading rate after peak capacity, while the severity index increased in the post-peak zone, indicating more severe damage. The sudden rise in the historic index and cumulative signal strength indicates the possibility of several occurrences, such as the emergence of a significant crack, shifts in cracking modes, abrupt failure, or notable fiber debonding/pull-out. Moreover, there is a distinct rise in the number of AE knees corresponding to the increase in loading rate. The crack mapping from acoustic emission testing aligned with observed failure patterns, validating its use in structural health monitoring.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.34 no.4
• /
• pp.553-568
• /
• 2024

Due to the rapid development of IoT technology and the increase in home activities after the COVID-19 pandemic, users' demand for smart homes has increased significantly. As the size of the smart home market increases every year and the number of users increases, the importance of personal information protection and various security issues is also growing. It often grants temporary users smart home owner rights and gives them access to the system. However, this can easily allow access to third parties because the authorities granted are not properly managed. In addition, it is necessary to prevent the possibility of secondary damage using personal information collected through smart home devices and sensors. Therefore, in this paper, to prevent indiscriminate access to smart home systems without reducing user convenience, access rights are subdivided and designed according to the functions and types of smart home devices, and a token-based user access control technique using personal devices is proposed.

• Korean Journal of Environmental Biology
• /
• v.25 no.4
• /
• pp.326-335
• /
• 2007

This study was conducted to assess the environmental risks of anthracnose resistant transgenic chili peppers with the PepEST gene on non-target organisms in the agroecosystem environments during the chili pepper growing seasons in 2006. We quantitatively collected arthropods assemblages living on leaves and flowers of chili peppers on June 20, July 25, and August 25 by using an insect vacuum collector to compare the patterns of arthropod community structures between non-transgenic chili peppers (nTR, WT512) and anthracnose resistant transgenic chili peppers (TR, line 68). We found the seasonal difference with the highest species richness and Shannon's diversity in July's sampling among the growing seasons (P<0.05) and each sampling season showed the different arthropod community composition. We also found there was no statistical difference between the two types of crops, nTR and TR, at each sampling time (P>0.05). The significance level of arthropod community showed that there were lots of seasonal difference of functional groups as well as taxa but only the herbivore group in the functional groups was significantly different for the types of plants (P<0.05). So, we further examined the herbivore groups to find any potential damage and identified the possibility of herbivorous damage from some herbivores, grasshoppers, aphids and thrips. Although we couldn't find any adverse effects from the environmental risk assessment between the arthropod community structures on two types of plants from our results, we should keep working for the environmental risk assessment because of the herbivorous potential risk possibility.

• Journal of Legislation Research
• /
• no.44
• /
• pp.571-610
• /
• 2013

The current patent system is more often used for defensive purposes to exclude others' use or as a means to hold unfair strong positions in negotiations rather than for the original purpose as the dissemination and active use of useful technology. An injunction together with a damage is an important remedy for patent infringements. However, unlike a claim for damages, injunctions do not require the subjective requirement of intent and negligence or the occurrence of loss. If the validity of the patent and the fact of infringement are confirmed, automatically injunctions are issued without consideration of other circumstances. So a patent holder would exclude others' use and have a powerful position in negotiations because of injunctions for patent infringements. Therefore, those injunctions for patent infringements should be flexibly restricted according to cases under the premise to ensure fair compensation for the patent owner, rather than absolutely admitting injunctions for patent infringements like now. If then, it would serve the use of a useful technology and industrial development as the purpose of the patent system. First of all, judgments for preliminary injunctions should be strict and by deliberate decision on the merits permanent injunctions should be determined. In addition, it is needed that court's discretion possible to considerate 'the need for an injunction'. When the courts judge 'the need for an injunction', 'whether a patent holder has implemented a patent invention, the possibility of monetary compensation and the ability of the infringer for damages, a patent holder's intent to license and whether an injunction has been used as a weapon of negotiation, the proportion of patent technology in the entire products, the characteristics of patent technology and the possibility of patent invalidity, the competitive relationship for market share, the public interests and gains and losses between the parties and so on' should be considered. After these judgements, if 'the need for an injunction' is not approved, a patent owner would be protected by post-monetary compensation. However, because damages are related to illegal conducts in the past, in the case that an injunction is restrained, measures to ensure the legal implementation in the future are needed. It is primarily desirable that reasonable royalty is estimated throughout private negotiations between parties, but if agreement between the parties does not occur, patent owner should be able to claim the royalty for future.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.52 no.2
• /
• pp.110-126
• /
• 2024

This study conducted a classification of small-scale biological habitats created in Seoul to analyze and synthesize location characteristics, habitat structure, biological habitat functions, and threat factors of representative sites, as well as derive creation and management problems according to the ecological characteristics. The aim was to suggest improvement measures and management items. Data collected through a field survey was used to categorize 39 locations, and 8 representative sites were selected by dividing them into location, water system, and size as classification criteria for typification. Due to the characteristics of each type, the site was created in an area where amphibian movement was disadvantageous due to low or disconnected connectivity with the hinterland forest, and the water supply was unstable in securing a constant flow and maintaining a constant water depth. The habitat structure has a small area, an artificial habitat structure that is unfavorable for amphibians, having the possibility of sediment inflow, and damage to the revetment area. The biological habitat function is a lack of wetland plants and the distribution of naturalized grasses, and threats include the establishment of hiking trails and decks in the surrounding area. Artificial disturbances occur adjacent to facilities. When creating habitats according to the characteristics of each type, it was necessary to review the possibility of an artificial water supply and introduce a water system with a continuous flow in order to connect the hinterland forest for amphibian movement and locate it in a place where water supply is possible. The habitat structure should be as large as possible, or several small-scale habitats should be connected to create a natural waterfront structure. In addition, additional wetland plants should be introduced to provide shelter for amphibians, and facilities such as walking paths should be installed in areas other than migration routes to prevent artificial disturbances. After construction, the management plan is to maintain various water depths for amphibians to inhabit and spawn, stabilize slopes due to sediment inflow, repair damage to revetments, and remove organic matter deposits to secure natural grasses and open water. Artificial management should be minimized. This study proposed improvement measures to improve the function of biological habitats through the analysis of problems with previously applied techniques, and based on this, in the future, small-scale biological habitat spaces suitable for the urban environment can be created for local governments that want to create small-scale biological habitat spaces, including Seoul City. It is significant in that it can provide management plans.

• Journal of the Society of Disaster Information
• /
• v.10 no.4
• /
• pp.583-597
• /
• 2014

Fire caused by heater has various causes as many as the types of heater. also, lots of damage of human life and property loss are caused, since annually continuous fire accident by heater in traditional market is frequently occurring. There are not many cases of fire due to heater in most of residential facilities such as general house, apartments, etc., because they are supplied with heating boiler, however the restaurant, store and office of the market, sports center, factory, workplace, etc. still use heater, e.g. oilstove, electric heater, etc., so that they are exposed to fire hazard. Also, when investigating the number of fire due to heater, it was analyzed to occur in order of home boiler, charcoal stove, oilstove, gas heater/stove, electric stove/heater, the number of fire per human life damage was analyzed in order of gas heater/stove, oil heater/stove, electric heater/stove, briquette/coal heater. Also, gas and oil related heater were analyzed to have low frequency, however, with high fire intensity. Therefore, this research aimed at considering more scientific fire inspection and identification approach by reenacting and reviewing fire outbreak possibility caused by combustibles' contact and conductivity under the normal condition and abnormal condition in respect of ignition hazard, i.e. minimum ignition temperature, carbonization degree and heat flux along with it, due to oilstove and electric stove, which are still frequently used in public use facility, traditional market, and, of which actual fire occurrence is the most frequent. As the result of reenact test, ignition hazard appeared very small, as long as enough heat storage condition is not made in both test objects(oilstove/electric stove), however carbonization condition was analyzed to be proceeded per each part respectively. Eventually, transition to fire is the ignition due to heat storage, so that it was analyzed to ignite when minimum heat storage temperature condition of fire place is over $500^{\circ}C$. Particularly, in case of quartz pipe, the heating element of electric stove, it is rapidly heated over the temperature of $600^{\circ}C$ within the shortest time(10sec), so that the heat flux of this appears 6.26kW/m2, which was analyzed to result in damage of thermal PVC cable and second-degree burn in human body. Also, the researcher recognized that the temperature change along with Geometric View Factor and Fire Load, which display decrease of heat, are also important variables to be considered, along with distance change besides temperature condition. Therefore, the researcher considers that a manual of careful fire inspection and identification on this is necessary, also, expects that scientific and rational efforts of this research can contribute to establish manual composition and theoretical basis on henceforth fire inspection and identification.