• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.41-48
• /
• 2011

Warm-mix asphalt(WMA) technology has been developed to allow asphalt mixtures to be produced and compacted at a significantly lower temperature. The WMA technology was identified as one of means to lower emissions for $CO_2$ and has been spread so quickly in the world. Recently, two innovative WMA additives has been developed to reduce mixing and paving temperatures applied in asphalt paving process in Korea. Since the first public demonstration project in 2008, many WMA projects have successfully been constructed in national highways. In 2010, the WMA field trial was conducted on new national highway construction under Dae-Jeon Regional Construction Management Administration. The two different WMA loose mixtures(WMA and WMA-P) and a HMA mixture were collected at the asphalt plant to evaluate their mechanical performance in the laboratory. The Third-scale Model Mobile Loading Simulator(MMLS3) was adopted to evaluate rutting resistance and moisture damage under different traffic and environmental conditions. In this study, plant-produced WMA mixtures using two WMA additives along with the conventional hot mix asphalt(HMA) mixtures were evaluated with respect to their rutting resistance and moisture susceptibility using MMLS3. Based on the limited laboratory test results, plant-produced WMA mixtures are superior to HMA mixtures in rutting resistance and the moisture susceptibility. The WMA additive was effective for producing and compacting the mixture at $30^{\circ}C$ lower than the temperature for the HMA mixture.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1997.04a
• /
• pp.103-103
• /
• 1997

일시적인 국소 뇌허혈 rat model에서 중대뇌동맥의 폐쇄시간에 따른 뇌조직의 손상정도를 비교 조사하였다. 웅성 Wistar rats를 isoflurane 홉입마취하에서 우측 내경동맥내로 17 mm의 silicone-coated 4-0 nylon monofilament를 삽입하여, 중대뇌동맥의 기저부를 30분, 60분 또는 90분동안 폐쇄한 후 이 monofilament를 다시 밖으로 뽑아내므로써 23 시간동안 recirculation 시키는 일시적 국소 뇌허혈 rat model을 사용한 결과, 수술 후 거의 모든 rats에서 left hemiparesis 또는 좌측으로의 circling과 같은 신경학적 결손이 나타나므로써 높은 성공률을 가지고서 비교적 용이하게 뇌허혈을 유발시킬 수 있었으며, 2 mm 두께의 fresh brain coronal slices에 대하여 2,3,5-triphenyltetrazolium chloride (TTC) 염색법을 시행하여 slice surface의 사진을 찍고 computerized 영상분석법을 이용하여 필요한 면적을 측정하므로써, coronal slice의 infarction size (%)는 총 면적에 대한 infarction 면적의 %로서, 부종율 (%)은 대조측 대뇌반구 면적의 2배에 대한 동측 대뇌반구와 대조측 대뇌반구 면적 차이의 %로서 산정되어졌다. 30분 허혈군에서는 본 염색법으로는 infarction이 거의 확인되지 않았으나 60분 허혈군 (n=13)에서는 우측 somatosensory frontoparietal cortex와 striatum 양자 모두 또는 일부 rats에서는 striatum에만 국한된 ulfarction이 확인되어졌으며 90분 허혈군 (n=12)에서는 거의 대부분의 rats에서 위 두 지역 모두에서 infarction이 확인되어졌다. Infarction size (%)는 60분과 90분 허혈군 각각에서, frontal pole로부터 5 mm되는 slice에서는 11.9$\pm$1.2 (평균치$\pm$표준오차), 13.7$\pm$1.9이었으며 7 mm되는 slice에서는 19.1$\pm$1.8, 21.9$\pm$2.1이었으며 9 mm되는 slice에서는 14.7$\pm$2.4, 19.7$\pm$2.2이었다. 또한 부종율 (%)은 60분과 90분 허혈군 각각에서, frontal pole로부터 5 mm되는 slice에서는 3.1$\pm$0.6, 3.8$\pm$0.7이었으며 7 mm되는 slice에서는 3.5$\pm$0.3, 5.7$\pm$1.0이었으며 9 $\pm$되는 slice에서는 3.4$\pm$0.5, 5.7$\pm$0.9이었다. 한편 90분 동안의 중대뇌동맥 폐쇄에 따른 뇌조직 손상을 cresyl violet 염색법, NADPH-diaphorase histochemistry, GFAP immunohistochemistry를 사용하여 일부 측정한 결과, 위의 손상지역에서는 뇌신경세포체들의 shrinkage 내지는 소실됨을 확인할 수 있었으며, NADPH-diaphorase-positive neuron들도 대부분 dendrite와 axon같은 cell process들의 fragmentation, shrinkage 내지는 소실되므로써 intensity의 감소현상이 나타났으며, reactive gliosis로 말미암아 GFAP immunoreactive intensity의 증가현상이 나타났다.

• Journal of Environmental Impact Assessment
• /
• v.25 no.6
• /
• pp.402-413
• /
• 2016

Marine oil spill accidents are occurring continuously due to the marine transportation of the oil. While building a preventive system for oil spill is uttermost necessary, we also need to have a systematic response system to handle the oil spills that inevitably occur. So far, studies have focused on the environmentally sensitive resources affected by oil spills. However, there is a need to conduct research to evaluate the damage to the socially and economically sensitive resources that make up the life of local residents. This study represents the process of building an analytical framework for the assessment of socioeconomic resources affected by marine oil spills. While it is important to provide a scheme for identification and indexation of socially and economically sensitive resources that is compatible with Korea's situations, using existing data for identifying socio-economically sensitive resources might also be meaningful. However, to allow accurate analysis for better evaluation, we need to select more applicable data among the various indicators. In this research, we have reviewed many existing case studies of sensitive resources, studies of the variables that have been used for indexing sensitive resources, and various factors considered in SIA (Social Impact Assessment). Based on the findings, we classify socio-economically sensitive resources into marine products acquisition, population, land usage, administrative area, and cultural heritage and tourist region.

• Convergence Security Journal
• /
• v.14 no.4
• /
• pp.9-17
• /
• 2014

With the rapid development of the Internet and information technology, a company that deals with personal information does not have proper action to protect personal privacy and not take measures for the safe handling and management of personal information. It generates the case to abuse of personal information occurring frequently. In order to focus the effort to reduce damage and protect the privacy of personal information entity and enhance privacy laws based on the connection method and the processing of personal information, Korea encourages a company to follow regulation by providing certain criteria. However, in the case of items of measures standard of safety of personal information such as priority applicable criteria in accordance with the importance of itemized characteristics and the company of each individual information processing is not taken into account, and there are some difficulties to execute. Therefore, we derive criteria by law and reviewing existing literature related, the details of the measures standard of safety of personal information in this study and generate a hierarchical structure by using the KJ method for layering and quantification of the evaluation in integration of the reference item similar and the grouping. Accordingly, the weights calculated experts subject using the AHP method hierarchical structures generated in this manner, it is an object of the proposed priority for privacy and efficient more rational enterprise.

• The Korean Society of Law and Medicine
• /
• v.15 no.1
• /
• pp.211-237
• /
• 2014

Because of unpredictability and high possibility of abnormal results by clinical trials compared to general medical behaviors, a procedure for ensuring with sufficient explanations by investigators must be secured. Therefore, in a sequence of clinical trials, what kinds of scope, stage, and method of explanations provided by investigators, including doctors or researchers, to trial subjects are closely related to the compensation for damages by violation of liability for explanation. In case of application of clinical trials to patients who have critical illness such as cancer, issues of "Quality of Life" regarding trial subjects, cancer patients, should be discussed. Especially, in case of clinical trials for terminal cancer patients, the right of subjects' self-determination, which is a fundamental principle in medical behaviors, should be discussed. The right of self-determination includes participation in clinical trials for the possibility of life-sustaining even a little bit, or no participation in clinical trials in order to have a time for completing the rest of his life. Like this, if the extent and scope of explanations related to the issues of "Quality of Life" are raised as main issues, the evaluation of "Quality of Life", should be a prerequisite. In many occasions, realistically, despite bad results such as deaths or serious adverse drug reactions after clinical trials, it may not be easy for compensating to trial subjects or their survivors, who requested civil compensation for damage. Futhermore, in abnormal results after concealment of clinical trials or performance of clinical trials without permission, and in the case of trial subjects' failures of proving proximate cause between the clinical trials and abnormal results, problematic results such as no protection to the trial subjects could be occurred. In performing clinical trials, investigators should provide sufficient explanations for trial subjects and secure voluntary informed consents from the trial subjects. Therefore, clinical trials without trial subjects' permissions and the informed consent process violate trial subjects' rights of self-determination, and the investigators shall be liable for compensation for damages. Then, issues might be addressed are what are essential contents of patients' "rights of self-determination" infringed by clinical trials without subjects' permissions. Two perspectives about patients' rights of self-determination might be considered. One perspective regards physical distress of patients (subjects) from therapies without sufficient explanations as the crux of the matter. The other perspective regards infringement of human dignity caused by being subjects without permission as the crux of the matter irrespective of risks' big and small influences. This research follows perspective of the latter. Forming constant fiduciary relation between investigators (doctors) and subjects (patients) pursuant medical contracts, and in accordance with this fiduciary relation, subjects, who are patients, have expectations of explanations and treatments by the best ways. If doctors and patients set this forth as a premise, doctors should assume civil liability when doctors infringe patients' expectations.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.4
• /
• pp.302-312
• /
• 2017

Objectives: In this study, an evaluation of the working environment of furnace workers was performed and the work-relatedness of the occupational diseases were examined Methods: In this study, two electric furnaces at a single casting business site producing manganese-based iron alloy were selected, and occupational exposures to hazardous substances were evaluated for furnace workers and furnace worker assistants. Results: As a result, total dust concentration were $0.407{\sim}3.001mg/m^3$ and respirable dust concentration were $0.196{\sim}0.584mg/m^3$. The highest concentration of crystalline silica was $0.079mg/m^3$ In the case of Masato and Sosuckwhoi crystalline silica, they contained 90.85% and 4.17% respectively. Manganese concentration was the highest at a $0.205mg/m^3$ maximum. The average of black carbon is $11.56{\mu}g/m^3$ and the maximum concentration is $604.23{\mu}g/m^3$. PAHs concentration was the highest at a $78.301{\mu}g/m^3$ of naphthalene. The concentration of carbon monoxide was 18.82 ppm(total average 3.89 ppm) during pouring, and the maximum is 131 ppm. The formaldehyde concentration was 0.003 to 0.007 ppm. Conclusions: It seems that conditions in the past were worse, since casting has recently been performed only twice per day for about 20 minutes, reducing the amount of pouring, and local exhaust systems have been installed one-by-one. In addition, it was judged that the past exposure levels were higher considering the points measured on the back-side due to the risk of damage to the individual samples. It was found that operators could be exposed to high concentrations of crystalline silica, and that they were also exposed to high concentrations of metal(fume) and carbon monoxide during pouring. Therefore, there is a risk that occupational diseases such as lung cancer and COPD may occur with long-term work in such a process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4672-4678
• /
• 2013

Aluminum dross is formation at the surface of the molten metal as the latter reacts with the furnace atmosphere and it was an unavoidable by-product of the aluminum production process. However aluminum dross was usually landfilled or disposed without treatment, causing much environmental damage. The purpose of this study is to investigate the possibility of ceramic catalyst support using recycled Al dross. The recycled Al dross was made into SCR catalyst by mixing with $WO_3$, $V_2O_5$ and $TiO_2$. The $V_2O_5-WO_3/TiO_2-Al_2O_3$ SCR catalyst was observed with XRF, XRD and BET. $V_2O_5-WO_3/TiO_2-Al_2O_3$ SCR strength was measured by Universal Testing Machine(UTM). As the added $Al_2O_3$, streagth is increased. And the NOx removal activity was observed by MR(Micro-Reactor). The temperatures ranging from $350^{\circ}C$ and $400^{\circ}C$, $V_2O_5-WO_3/TiO_2-Al_2O_3$ SCR catalyst De-NOx performance result of showed excellent activity over 90% at application condition.

• Journal of the Korean Institute of Gas
• /
• v.18 no.4
• /
• pp.76-85
• /
• 2014

To establish the necessary safety technology in high-pressure toxic gas facilities, especially for the corrosion, which is the main causes of toxic gas accident, this study adopts and investigates the API-581 procedures developed by the American Petroleum Institute (API). And the applicability of the 8-step analytical procedures of consequence analysis in API-581 is discussed, and a method for consequence analysis in high-pressure toxic gas facilities is suggested. Based on the discussion and results, the analytical procedure is simplified as the 6 steps in total for the effective application to high-pressure toxic gas facilities: Step 1 (determination of representative material), Step 5 (determination of release type), Step 6 (determination of phase of fluid), and Step 8 (estimation of damage range) are not applied: Step 3 (estimation of total amount of release) is applied only for the inventory group concept; Step 4 (estimation of release rate) only for the gas release rate; and all of Step 2 (selection of release hole size) and Step 7 (evaluation of post-release response) are applied. In the proposed method, the generally applicable method of CCPS is adopted as alternative method for Steps 5 and 8.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.1
• /
• pp.19-30
• /
• 2014

For the expansion of the Semantic Web, studies in converting the data stored in the relational database into the ontology are actively in process. Such studies mainly use an RDB to RDF mapping model, the model to map relational database components to RDF components. However, pre-proposed mapping models have got different expression modes and these damage the accessibility and reusability of the users. As a consequence, the necessity of the standardized mapping language was raised and the W3C suggested the R2RML as the standard mapping language for the RDB to RDF model. The R2RML has a characteristic that converts only the relational database schema data to RDF. For the same reasons above, the ontology about the relation data between table name and column name of the relational database cannot be added. In this paper, we propose an RDB to RDF mapping system considering semantic relations of RDB components in order to solve the above issue. The proposed system generates the mapping data by adding the RDFS attribute data into the schema data defined by the R2RML in the relational database. This mapping data converts the data stored in the relational database into RDF which includes the RDFS attribute data. In this paper, we implement the proposed system as a Java-based prototype, perform the experiment which converts the data stored in the relational database into RDF for the comparison evaluation purpose and compare the results against D2RQ, RDBToOnto and Morph. The proposed system expresses semantic relations which has richer converted ontology than any other studies and shows the best performance in data conversion time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3370-3377
• /
• 2015

FMECA(Failure Mode, Effects and Criticality Analysis) techniques to make quantitative evaluation of failure effects severity and criticality have been applied to systematic failure analysis for reliability improvement of train which should provide regular service and secure high level of safety as a mass transportation system. These FMECA techniques do not fully reflect the inherent train operation and maintenance circumstances because they are based on the FMECA standards devised for other industries such as automobile industry and FMECA standard dedicated to train industry has not been established yet. This paper analyzes FMECA standards for various industries, and suggests a FMECA technique dedicated to train industry which makes failure effect analysis and criticality analysis step by step and makes criticality analysis placing emphasis on the severity of the failure effect. The proposed technique is applied to FMECA of high-speed current breaker which is a core safety device of train using field failure data for 15 years of train maintenance. The FMECA results show that breakage of arc chute has the highest risk with 3rd severity class and 5th criticality class among all the components of high-speed circuit breaker. Damage and poor contact of electronic valve, and cylinder breakage with 3rd severity class and 4th criticality class are followed by. These results can be applied to improvement of design and maintenance process for high-speed circuit breaker of train.