• Strategy21
• /
• s.46
• /
• pp.89-122
• /
• 2020

The longing for submarine manufacture and the fear of her power had exited for a long time, but submarine that could submerge and attack was built from 20th century by science technology development. The question, 'Submarine can exercise her power in naval warfare?' had exited before World War I, but the effective value of submarine was shown in the procedure of a chain of naval warfare during World War I and World War II. Germany and the United States made the best use of submarines at that time. The submarines of these nations mounted fierce attack on the enemy's battleships and merchant ships and blocked the sea lanes for war material. These fierce attack on ships became impossible After World War II, and the major powers reduced and coordinated the defence budget, so they considered the role of submarine. However, submarine is still powerful weapon system because she can secretly navigate under the water, and one of the most important force in the navy. The aim of this thesis is analyzing submarine roles in each naval warfare and integrating maritime strategy and weapon system technology into her roles. First, the research about represent submarine roles like anti-surfaceship warfare, anti-submarine warfare, intelligence gathering, land attack, supporting special operation and mine landing warfare will be presented, then the major naval warfare where submarine participated(during ex-World War I, World War I, World War II, The Cold War Era and post Cold War) and the analyzing of submarine roles by time will be presented. Submarine was developed for anti-surfaceship warfare during ex-World War I but could not make remarkable military gain in naval warfare because her performance and weapon was inadequate. However, the effective value of submarine in the procedure of a chain of naval warfare was shown during World War I and World War II. The major powers put battleships into naval warfare undiscriminatingly to command the sea power and submarines did massive damage to enemy navy power, so put a restraint the maritime power of enemy, and blocked the sea lanes for war material. After World War II, the battlefield situation changed rapidly and the concept of preemption became difficult to apply in naval warfare. Therefore, the submarine was unable to concentrate on anti-surfaceship mission. Especially during the Cold War era, nuclear submarine came to appear and her weapon system developed rapidly. These development gave submarines special missions: anti-submarine warfare and intelligence gathering. At that time, United States and Soviet submarines tracked other nation's submarines loaded with nuclear weapons and departing from naval their base. The submarines also collected information on the volume of ships and a coastal missile launching site in company with this mission. After Cold War, the major powers despatched forces to major troubled regions to maintain world peace, their submarines approached the shores of these regions and attacked key enemy installations with cruise missiles. At that time, the United States eased the concept of preemption and made the concept of Bush doctrine because of possible 911 terrorism. The missiles fired from submarines and surface battleships accurately attacked key enemy installations. Many nations be strategically successful depending on what kind of mission a submarine is assigned. The patterns of future naval warfare that my country will provide against will be military power projection and coalition/joint operations. These suggest much more about what future missions we should assign to submarines.

• Journal of Conservation Science
• /
• v.30 no.3
• /
• pp.263-275
• /
• 2014

It's shown how to proceed the study on Manufacturing techniques & Conservation to the Iron Pot from Cheonmachong Ancient Tomb(the 155th Tomb in Hwangnam-dong). In order to investigate manufacturing techniques of the Iron Pot, some parts of the relic were gathered. After mounting, polishing and etching on the relic, analyzing the metal microstructure was conducted. Also it's conducted a SEM-EDS analysis on the nonmetallic inclusion. White iron structure was observed in the metallurgical structure inspection, SEM-EDS analysis. It seems to be dried slowly at room temperature after casting, doesn't look as particular heat treatment to improve brittleness. It is estimated that it's as the handle seam side were verified about 3cm inch wide, 1.5 thick in center of body, so 2 separate half-completed products was cast with width-type mould. The manufacturing techniques Using white cast iron structure, width-type mould are observable to the Iron Pot excavated from Sikrichong Ancient Tomb & Hwangnamdaechong grand Ancient Tomb around those were constructed the same time. It's able to recognize that it's almost identical manufacturing techniques at that time. Conservation is generically following those are survey of pretreatment, foreign material removal, stabilization, restoration and color matching in the order. cleaning & drying were added to the process as occasion demands. The strengthening treatment were difficult with artifact's volume, low concentration Paraloid NAD-10 solution was spread two or three times with a brush, surface hardening also came up with 15wt% Paraloid NAD-10 solution after the conservation was complete. There were connection & restoration for the restoration to the damage after modeling forms that it's similar to damaged parts by using the Fiber Reinforced Plastic resins(POLYCOAT FH-245, mold laminated type). Throughout this research, capitalizing on accumulations of measurements about the production technique of Iron Pot in the time of the fifth and 6th centuries is no less important than the Iron artifact's conservation for a better study in the future.

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.293-303
• /
• 2012

Recently, as construction technology improved, concrete structures not only became larger, taller and longer but were able to perform various functions. However, if extreme loads such as impact, blast, and fire are applied to those structures, it would cause severe property damages and human casualties. Especially, the structural responses from extreme loading are totally different than that from quasi-static loading, because large pressure is applied to structures from mass acceleration effect of impact and blast loads. Therefore, the strain rate effect and damage levels should be considered when concrete structure is designed. In this study, the low velocity impact loading test of steel fiber reinforced concrete (SFRC) slabs including 0%~1.5% (by volume) of steel fibers, and strengthened with two types of FRP sheets was performed to develop an impact resistant structural member. From the test results, the maximum impact load, dissipated energy and the number of drop to failure increased, whereas the maximum displacement and support rotation were reduced by strengthening SFRC slab with FRP sheets in tensile zone. The test results showed that the impact resistance of concrete slab can be substantially improved by externally strengthening using FRP sheets. This result can be used in designing of primary facilities exposed to such extreme loads. The dynamic responses of SFRC slab strengthened with FRP sheets under low velocity impact load were also analyzed using LS-DYNA, a finite element analysis program with an explicit time integration scheme. The comparison of test and analytical results showed that they were within 5% of error with respect to maximum displacements.

• The Korean Journal of Air & Space Law and Policy
• /
• v.23 no.2
• /
• pp.3-29
• /
• 2008

The volume of air passengers and cargo transportation has increased rapidly in recent years. This trend will be even more noticeable as the high-tech service industry expands and the globalization progresses. In an effort to reflect and to cope with this trend, many conventions concerning international air transportation have been concluded. The Republic of Korea has also acceded to the Montreal Convention of 1999 on September 20th, 2007 which became effective on December 29th 2007. However, Korea currently does not provide any private law on the liability of domestic air carrier, leaving the regulation wholly to the general conditions of carriage of private air lines. These general conditions of carriage, however, are not sufficient to regulate the liabilities of domestic air carriers, because they cannot be fully recognized as a legitimate source of law applicable in the court. This situation is inconvenient for both air carrier and their customers. Thus, the Ministry of Justice of Korea has decided to enact a law that will regulate domestic air transportation, namely, "Domestic Carriage by Air Act", as a part of the Korean Commercial Code. So was composed a special committee for legislation of the Domestic Carriage by Air Act. This writer has led the committee as a chairman. The committee has held in total 10 meetings so far and has completed a draft bill for the part VI of the Korean Commercial Code, "Air Carriage." The essentials of the draft are as follows: First, the establishment of Part VI in the Commercial Code. The Korean Commercial Code already includes a series of provisions on road transportation in part II and carriage by sea in part V. In addition to these rules regulating different types of transportation, the Domestic Carriage by Air Act will newly establish part VI to regulate air carriages. Eventually, the Commercial Code will provide an integrated legal system on the transportation industry. Second, the acceptance of the basic liability system which major international conventions, such as Montreal Convention of 1999 and Guadalajara Convention of 1961, have adopted. This is very important, because the law of air carriage is unified worldwide through various international conventions, making it necessary and significant for the new act to achieve conformity between rules of international air carriage and that of domestic air carriage. Third, the acceptance of Rome Convention system on damage caused by foreign aircraft to third parties on the surface. Fourth, the application of rules on domestic road carriage or carriage by sea mutatis mutandis with necessary modifications. This very point is the merit of inserting domestic air transportation law into the Commercial Code. By doing so, the number of articles can be reduced and the rules on air carriage can conform to that of road transportation and carriage by sea. The bill is expected to be passed by the parliament at the end of this year and is expected to be effective by end of July 2009.

• Korean Journal of Environment and Ecology
• /
• v.21 no.3
• /
• pp.243-256
• /
• 2007

The purpose of this paper is aimed at identifying the planting condition of greenbelt axis covering forests located at Sinhyeon-eup, Geoje-si and also establishing improvement plans for the ecological organization. The study was executed with buffer green space designed to mitigate noise, which is located at a halfway point linking Mt. Yukkyo(altitude of 50m) and Mt. Jungmae(altitude of 131m). The number of the biotope patterns was classified into 17 in total: the two are urbanized districts such as a townified district and streets and another 15 are greenbelts and open space such as forest biotope, inland water biotope, and landscaping tree plantations biotope. According to the analysis of biotope types, it was estimated that the making use of already established buffer greens as a linking medium with a foothold of Mt. Yukkyo and Jungmae, whose natural eco-system is well suited for habitation of living organism, is the one and only way to the influx of living organism into the downtown area. The green coverage rate of the base green area, sub-base green area and linkage green area was 160.29%, 128.37% and 44.37% respectively; the green capacity coefficient(i.e. GVZ[$Gr{\ddot{u}}nvolumezahl$]) for base green area, sub-base green area and linkage green area was $4.04m^3/m^2,\;3.95m^3/m^2\;and\;0.65m^3/m^2$ respectively. The base green area has constituted multi-layered vegetation structure and thus played a role as habitats for living organism and supply centre of species, whereas the sub-base green area has destroyed lower layer vegetation, and the linkage green area was in bad shape due to the lack of planting volume and damage of the shrub layer. Accordingly, this research paper intended to suggest detailed implementation plans for the improvement in landscape for city dwellers' use and relaxation; in other words, this paper focused on ecological build-up for the Influx of wild birds into the downtown area for the promotion of bio-diversity of species through the linkage of base green areas and the fostering of nature observing trails for citizens as well as the connecting of green areas through the build-up of roadside greens to make these green areas to be efficiently used as corridors for the influx of wild birds and bio-organism habitation and for citizens' using space.

• Tuberculosis and Respiratory Diseases
• /
• v.40 no.2
• /
• pp.104-111
• /
• 1993

Background: Gram-negative bacterial endotoxin induced septicemia is known to be a leading cause in the development of adult respiratory distress syndrome(ARDS). The mechanism of endotoxin induced lung injury is mainly due to the activated neutrophils which injure the capillary endothelial cells by releasing oxidant radical and resulted in pulmonary edema. We studied the change of antioxidant enzyme in the case of large or small, intermittant dose of endotoxin infused rat lungs. Methods: Endotoxin was given to the rat through the peritoneal cavity in the dose of 7 mg/kg body weight in the large dose group and 1 mg/kg for 10 days in the small dose group. Bronchoalveolar lavage (BAL) was done and rats were killed at 6, 12, 24 hours after single endotoxin injection in the large dose group and 3, 7, 10 days after daily endotoxin injection for 10 days in the small dose group. The lungs were perfused with normal saline through the pulmonary artery to remove the blood and were homogenized in 5 volume of 50 mM potassium phosphate buffer containing 0.1 mM EDTA. After centrifuging at 100,000 g for 60 minute, the supernatent was removed and stored at $-70^{\circ}C$ until measuring for superoxide dismutase (SOD), catalase, glutathione peroxidase (GSH-Px) and protein. Results: We observed the following results. 1) The lung wet/dry weight ratio and albumin concentration in the BAL fluids were increased to peak at 12 hours and neutrophil number in the BAL fluids were peak at 6 hours after endotoxin injection in the large dose group. 2) Cu, Zn SOD (IU/mg protein) was significantly decreased after 6, 12 hours after endotoxin injection in the large dose group. 3) There were no singnificant change in the level of Mn SOD, catalase, GSH-Px after endotoxin injection in both groups. Conclusion: Endotoxin in the large dose group produced the acute pulmonary edema and decreased the Cu, Zn SOD in the lung tissue after injecting endotoxin at 6 and 12 hours. These phenomenon may be due to the cell membrane damage by endotoxin. Further research would be necessary whther giving SOD by intratracheal route or method to increase the synthesis of SOD may lessen the acute lung injury by endotoxin.

• Korean Journal of Animal Reproduction
• /
• v.26 no.2
• /
• pp.153-163
• /
• 2002

In vitro matured porcine oocytes have very small volume of perivitellinspace (PVS). In these respect, the effect of sucrose and polybrene on the efficiency of gene transfer was investigated. As a gene (hGH) transfer vehicle, vesicular stomatitis virus glycoprotein pseudotyped retroviral vector (VSV-G) was used. Sucrose treatment has no detrimental effect on the rates of cleavage and resulted in the enlargement of PVS for the efficient introduction of retroviral vector stocks. Introduction rates of retrovirus in 0.5, 1, 2, 3 % sucrose treatment group were higher than that of the non-treatment group (39.3, 43.3, 35.7, 40.7 % vs. 8.3 %), respectively. In addition, we observed that sucrose pretreatment during injection procedure significantly reduce the frequency of polyspermy. In general, polybrene is a polycation essential for retrovirus transduction. The groups with the addition of 0.5, 5, 50$\mu\textrm{g}$/$m\ell$ polybrene exhibited a significant effect on gene transfer compared to that of the non-addition group (56.5, 50.0, 57.1 % vs. 34.6 %), respectively But, when the oocytes were co-injected with retrovirus and 50$\mu\textrm{g}$/$m\ell$ polybrene, the rates of cleavage and blastocyst development were 43.3 and 4.6%, respectively. This rates were lower than those of the non-addition group (70.0 and 17.3 %). In conclusion, sucrose pretreatment have increased efficiency of retroviral mediated gene transfer in porcine oocytes with no damage on in vitro fertilization and embryo development. In addition, sucrose pretreatment was beneficial in polyspermy inhibition. Presence of polybrene during microinjection showed a beneficial effect on the gene transfer in porcine oocytes, in low concentration. And these results will provide an useful tool for production of transgenic pigs by retroviral mediated gene transfer.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.177-183
• /
• 2018

Purpose : Volumetric Modulated Arc Therapy(VMAT) has the advantage of uniformly and precisely irradiating the tumor to the shape of the tumor while reducing the risk of radiation damage to normal tissues. such as brain cancer, head and neck cancer and prostate cancer, It is being used for treatment. The purpose of this study is to evaluate the usefulness of the Jaw-Tracking technique(JTT) in VMAT for brain and head and neck cancer. Materials and Methods : We selected eight patients with brain and head and neck cancer(4 Brain, 4 head and neck) who were treated with the VMAT treatment technique. Contouring information of the patient's tumor and normal organ was fused to the Rando phantom using the deformable registration of Velocity(Varian, USA). A treatment plan was developed using the Varian Eclipse(ver 15.5, Varian, USA) with the same patient actual beam parameters except for the use of jaw-tracking. As the evaluation index, the maximum dose and mean dose of target and OAR were compared and a portal dosimetry was performed for the treatment plan verification. Results : When using JTT, the relative dose of OAR decreased by 5.24 % and the maximum dose by 7.05 %, respectively, compared with the Static-Jaw technique(SJT). In the various OARs, the mean dose and maximum dose reduction ranges ranged from 0.01 to 3.16 Gy and from 0.12 to 6.27 Gy, respectively. In the case of the target, the maximum dose of GTV, CTV, PTV decreased by 0.17 %, 0.43 %, and 0.37 % in JTT, and the mean dose decreased by 0.24 %, 0.47 % and 0.47 %, respectively. Gamma analysis The JTT and SJT passing rates were $98{\pm}1.73%$ and $97{\pm}1.83%$ on the basis of 3 % / 3 mm, respectively. Comparing the doses of all OARs applied to the experiment, it was found that the use of JTT resulted in a significant decrease in dose due to additional jaw shielding besides MLC than SJT. Conclusion : In radiation therapy using VMAT treatment plan, we can apply JTT in the case of adjacent tumor and normal organs such as brain cancer and head and neck cancer, and in radiotherapy required large field and high energy caused increase leakage dose through MLC. It is considered that the target dose of PTV can be increased by lowering the dose of normal tissue surrounding the tumor.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.1
• /
• pp.36-42
• /
• 2019

A macroporous Sn thick film as a high capacity negative electrode for a lithium ion secondary battery was prepared by using a chemical etching method using nitric acid for a Sn film having a thickness of $52{\mu}m$. The porous Sn thick film greatly reduced the over-voltage for the alloying reaction with lithium by the increased reaction area. At the same time. The porous structure of active Sn film plays a part in the buffer and reduces the damage by the volume change during cycles. Since the porous Sn thick film electrode does not require the use of the binder and the conductive carbon black, it has substantially larger energy density. As the concentration of nitric acid in etching solution increased, the degree of the etching increased. The etching of the Sn film effectively proceeded with nitric acid of 3 M concentration or more. The porous Sn film could not be recovered because the most of Sn was eluted within 60 seconds by the rapid etching rate in the 5 M nitric acid. In the case of etching with 4 M nitric acid for 60 seconds, the appropriate porous Sn film was formed with 48.9% of weight loss and 40.3% of thickness change during chemical acid etching process. As the degree of etching of Sn film increased, the electrochemical activity and the reversible capacity for the lithium storage of the Sn film electrode were increased. The highest reversible specific capacity of 650 mAh/g was achieved at the etching condition with 4 M nitric acid. The porous Sn film electrode showed better cycle performance than the conventional electrode using a Sn powder.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.1
• /
• pp.52-69
• /
• 2021

The transcriptions of Buddhist sutra in the Goryeo Dynasty are more elaborate and splendid than those of any other period and occupy a very important position in Korean bibliography. Among them, the transcriptions made on indigo paper show decorative features that represent the dignity and quality that nobles would have preferred. Particularly, during the Goryeo Dynasty, a large number of transcriptions were made on indigo paper, often in hand-scrolled and folded forms. If flexibility was not guaranteed, the hand-scrolled form caused inconvenience and damage when handling the transcription because of the structural limitations of the material that is rolled up and opened. It was possible to overcome these shortcomings by changing from the hand-scrolled to the folded form to obtain convenience and structural stability. The folded form of the transcription utilizes the same principle as the folding screen, so it is a structure that can be folded and unfolded, and it is made by connecting parts at regularly spaced intervals. No matter how small the transcription is, if it is made of thin paper, it is difficult to handle it and to maintain its shape and structure. For this reason, the folded transcription was usually made of thick paper to support the structure, and the cover was made thicker than the inner part to protect the contents. In other words, the forded form was generally manufactured to suit the characteristics of maintaining strength by making the paper thick. Because a large amount of indigo paper was needed to make this type of transcription, it is assumed that there were craftsmen who were in charge only of dark dyeing the papers. Usually, paper dyeing requires much more dye than silk dyeing, and dyeing dozens of times would be required to obtain the deep indigo color of the base of the transcription of Buddhist sutra in the Goryeo Dynasty. Unfortunately, there is no record of the Goryeo Dynasty's indigo blue paper manufacturing technique, and the craftsmen who made indigo paper no longer remain, so no one knows the exact method of making indigo paper. Recently, Hanji artisans, natural dyers, and conservators attempted to restore the Goryeo Dynasty's indigo paper, but the texture and deep colors found in the relics could not be reproduced. This study introduces the process of restoring indigo paper in the Goryeo Dynasty through collaboration between dyeing artisans, Hanji artisans, and conservators for conservation of the transcription of Buddhist sutra in the late Goryeo dynasty, yielding a suggested method of making indigo paper.