• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.31-34
• /
• 2005

For the damage tolerance improvement of conventional laminated composites, stitching process has been utilized for providing through-thickness reinforcements. 2D prefonl1S were stacked with S-2 glass plain weave, and 3D preforms were fabricated using the stitching process. For the matrix system, epoxy and phenol resins were considered. To examine the damage resistance performance the low velocity drop weight impact test has been carried out, and the impact damage was examined by scanning image. CAI (Compressive After Ih1paet) tests were also conducted to evaluate residual compressive strength. Compared with 2D epoxy composites, 2D phenol composites showed drastic reduction in the compressive strength prior to impact because of the higher contents of voids. The damage area of 2D phenol composites were also larger than that of 2D epoxy composites. However, by introducing the stitching, the damage area of 3D phenol composites was reduced by 60%, while the CAI strength improvement was negligible.

• Journal of Plant Biotechnology
• /
• v.34 no.4
• /
• pp.299-305
• /
• 2007

Oxidative stress is a major damaging factor for plants exposed to environmental stresses. Previously, we have generated transgenic potato (cv. Superior) plants expressing both CuZnSOD and APX genes in chloroplast under the control of an oxidative stress-inducible SWPA2 promoter (referred to as SSA plants) and selected the transgenic potato plant lines with tolerance against methyl viologen (MV)-mediated oxidative stress. When leaf discs of SSA plants were subjected to $3{\mu}M$ methyl viologen (MV), they showed approximately 40% less damage than non-transgenic (NT) plants. SSA plantlets were treated with $0.3{\mu}M$ MV stress, SSA plants also exhibited reduced damage in root growth. When 350 MV was sprayed onto the whole plants, SSA plants showed a significant reduction in visible damage, which was approximately 75% less damage than leaves of NT plants. These plants will be used for further analysis of tolerance to environmental stresses, such as high temperature and salt stress. These results suggest that transgenic potato (cv. Superior) plants would be a useful plant crop for commercial cultivation under unfavorable growth conditions.

• Journal of Korean Society of Forest Science
• /
• v.111 no.2
• /
• pp.251-262
• /
• 2022

We selected a cold-tolerant tea tree (Camellia sinensis L.) through reliable evaluation using a number of cold-tolerance indicators targeting tea tree cultivars such as "Chamnok," "Bohyang," "Sangnok," and "Myungnok" in response to climate change. We conducted a low-temperature damage investigation, "Chamnok" and "Bohyang" were damaged investigated with small amounts of green and bright green. "Sangnok" and "Myungnok" were damaged investigated red and dark red at -10℃. The extent of electrolyte leakage increased as the treatment temperature decreased in all cultivars. We predicted lethal temperatures through non-linear regression analysis, finding relatively higher tolerance to low temperature in "Chamnok" (-9.344℃) and "Bohyang" (- 8.883℃) than that in "Myungnok" (-8.092 ℃) and"Sangnok" (-7.632℃). "Bohyang" showed higher levels of antioxidant activity compared to other cultivars. The lipid peroxidation reaction revealed that "Sangnok" and "Myungnok" had higher MDA content than that of other cultivars when treated at low temperatures. Consequently, predictions of the lethal temperature through non-linear regression analysis of "Chamnok" and "Bohyang" were consistent with their tolerance to low-temperature damage, and antioxidant activity and lipid peroxidation reactions were likewise consistent. The results of this study can be used not only for evaluation and selection of cold-tolerance of tea trees in response to climate change, but also in the cultivation of cold-tolerant plants.

• Structural Engineering and Mechanics
• /
• v.64 no.5
• /
• pp.557-566
• /
• 2017

Fiber reinforced polymer (FRP) sheets are the most efficient structural materials in terms of strength to weight ratio and its application in strengthening and retrofitting of a structure or structural elements are inevitable. The performance enhancement of structural elements without increasing the cross sectional area and flexible nature are the major advantages of FRP in retrofitting/strengthening work. This research article presents a detailed study on the inelastic response of conventional and retrofitted Reinforced Concrete (RC) frames using Carbon Fibre Reinforced Polymers (CFRP) and Glass Fiber Reinforced Polymers (GFRP) subjected to quasi-static loading. The hysteretic behaviour, stiffness degradation, energy dissipation and damage index are the parameters employed to analyse the efficacy of FRP strengthening of brick in-filled RC frames. Repair and retrofitting of brick infilled RC frame shows an improved load carrying and damage tolerance capacity than control frame.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.253-256
• /
• 2006

The HPFRCCs show the multiple crack and damage tolerance capacity due to the interfacial bonding of the fibers to the cement matrix. For practical application, it is needed to investigate the fractural behavior and of HPFRCCs and understand the micro-mechanism of cement matrix with reinforcing fiber. The objectives of this paper are to examine the compressive behavior, fracture and damage process of HPFRCC by acoustic emission technique. Total four series were tested, and the main variables were the hybrid type, polyethylene (PE) and steel cord (SC), and fiber volume fraction. The damage progress by compressive behavior of the HPFRCCs is characteristic for the hybrid fiber type and volume fraction. And from acoustic emission (AE) parameter value, it is found that the second and third compressive load cycles resulted in successive decrease of the ring-down count rate as compared with the first compressive load cycle.

• International Journal of Fluid Machinery and Systems
• /
• v.3 no.4
• /
• pp.301-308
• /
• 2010

Quest for reliability of hydraulic runners is a concern for all mature electricity producers. The fatigue damage caused by dynamics loads is frequently the root cause of runner failure. This paper presents the damage tolerance approach based on fracture mechanics as the method chosen by Alstom and Hydro-Qu$\acute{e}$bec to predict effects of damage on runner lifetime and consequently to be use as a design method. This is sustained by a research on fracture mechanics properties of runner materials and by recommendations on the strategy to define a safety margin for design. The acquired knowledge permits to identify potential improvement of the runner lifetime without significant cost increase, like being more specific on some chemical composition or heat treatment.

• Structural Engineering and Mechanics
• /
• v.73 no.4
• /
• pp.381-395
• /
• 2020

Study on the inelastic response of bare and masonry infilled Reinforced Concrete (RC) frames repaired using Carbon Fibre Reinforced Polymers (CFRP) and Glass Fiber Reinforced Polymers (GFRP) subjected to quasi- static loading is presented in the work. The hysteresis behaviour, stiffness retention, energy dissipation and damage index are the parameters employed to analyze the efficacy of FRP strengthening of bare and brick in-filled RC frames. It is observed that there is a significant improvement in load carrying capacity of brick infilled frame over bare RC frame. Also FRP strengthened brick infilled frame performs much better than FRP repaired bare frame under quasi static loading. Repair and retrofitting of brick infilled RC frame shows an improved load carrying and damage tolerance capacity than control frame.

• Journal of Plant Biotechnology
• /
• v.6 no.4
• /
• pp.205-212
• /
• 2004

The objectives were to compare the salt tolerance levels in the parental rice cultivar, Dongjinbyeo, and induced mutagenesis derived its lines for plant height, MDA, ATPase, POD, and 2-dimensional protein electrophoresis pattern in NaCl-containing hydroponic nutrient solutions. Rice plants isolated from a population of rice (Oryza sativa L. cv. Dongjinbyeo) mutation lines, which were generated in combination with in vitro selection and gamma-ray, exhibited salt tolerance. Line No. 18 had the longest plant, whereas NaCl-sensitive line (No. 25) had the shortest plant. The parent, and the sensitive line showed severe damage from salt stress. Tolerant lines (No. 18, 50) had a lower malonaldehyde (MDA) content than the sensitive one (Dongjinbyeo, No. 25) during salt stress. Several proteins showed significant quantitative variation through 2DE; phosphoribulokinase, peroxidase, oxygen evolving enhancer 1 and the $H^+-ATPase$, which are known to be involved in salt tolerance. The effect of salt on peroxidase and $H^+-ATPase$ activity in the seedlings of two groups with contrasting genotypes of rice was studied. A greater activity was recorded in the tolerant lines as compared to the sensitive ones (P<0.05, Duncan's test). The results indicate that salt tolerant lines expressed more salt stress-inducible proteins associated with salt tolerance than the sensitive lines during salt stress.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.12
• /
• pp.1737-1746
• /
• 2013

IbMYB1, a transcription factor (TF) for R2R3-type MYB TFs, is a key regulator of anthocyanin biosynthesis during storage of sweet potatoes. Anthocyanins provide important antioxidants of nutritional value to humans, and also protect plants from oxidative stress. This study aimed to increase transgenic potatoes' (Solanum tuberosum cv. LongShu No.3) tolerance to environmental stress and enhance their nutritional value. Transgenic potato plants expressing IbMYB1 genes under the control of an oxidative stress-inducible peroxidase (SWPA2) promoter (referred to as SM plants) were successfully generated through Agrobacterium-mediated transformation. Two representative transgenic SM5 and SM12 lines were evaluated for enhanced tolerance to salinity, UV-B rays, and drought conditions. Following treatment of 100 mM NaCl, seedlings of SM5 and SM12 lines showed less root damage and more shoot growth than control lines expressing only an empty vector. Transgenic potato plants in pots treated with 400 mM NaCl showed high amounts of secondary metabolites, including phenols, anthocyanins, and flavonoids, compared with control plants. After treatment of 400 mM NaCl, transgenic potato plants also showed high DDPH radical scavenging activity and high PS II photochemical efficiency compared with the control line. Furthermore, following treatment of NaCl, UV-B, and drought stress, the expression levels of IbMYB1 and several structural genes in the flavonoid biosynthesis such as CHS, DFR, and ANS in transgenic plants were found to be correlated with plant phenotype. The results suggest that enhanced IbMYB1 expression affects secondary metabolism, which leads to improved tolerance ability in transgenic potatoes.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.170-177
• /
• 2020

This paper presents an open-fault tolerance control method for active neutral point clamped (ANPC) inverter with high frequency/low frequency (HF/LF) modulation. By applying the ANPC inverter with SiC MOSFETs and Si IGBTs, the system efficiency and performance can be improved compared to a Si-based inverter. HF/LF modulation is used for a megawatt-scale inverter to minimize the commutation loop. The open-switch failure in megawatt-scale inverter causes severe damage to load and huge expenses when the inverter has been shut-down. The proposed tolerance control of open-switch failure provides continuous operation and improved reliability to the ANPC inverter. The effectiveness of the proposed fault tolerance control is verified by simulation results.