• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.945-951
• /
• 2013

This study evaluated the fatigue strength of the bogie frame of an urban maglev train through fatigue analysis, cumulative damage, and fatigue tests based on a proposed fatigue evaluation method. The results of FEM analysis in which various load combinations were adopted showed that all data were under the fatigue limit of a butt welded joint made of A6005 in a Goodman diagram. The cumulative fatigue damage was calculated at the highest level from a bolt connecting the area of the electromagnetic pole in the casting block; however, the total sum was evaluated as D=0.808 based on $1{\times}10^7$ cycles, which indicates that it did not exceed the failure criteria. In addition, the results of the fatigue testshowed that there was no crack at any position in the bogie frame, which corresponded to the results of fatigue analyses.

• The Korean Society of Law and Medicine
• /
• v.14 no.1
• /
• pp.117-144
• /
• 2013

After several bills for the reasonable medical dispute resolution had been proposed for over twenty years, "Act on Remedy for Damage from Medical Accident and Medical Dispute Mediation" was eventually enacted on April 7, 2011 and came into effect from April 8, 2012. This study evaluates the achievements and results of the past year, suggesting the future improvements or tasks. The main issue of Act on Medical Dispute Mediation is Korea Medical Dispute Mediation and Arbitration Agency. Therefore, the success of the Act depends on the outcomes of Korea Medical Dispute Mediation and Arbitration Agency. Although the Act has been enforced for only one year, this paper examines the outcomes of the Agency with limited materials for its development. Korea Medical Dispute Mediation and Arbitration Agency was established for rapid, fair, and effective medical dispute resolution. Thus, the evaluation of the performances of the Agency is based on the 1) rapidness, 2) fairness, and 3) effectiveness of the dispute resolution. To sum up, the system earned positive evaluations as for the rapidness and fairness, but some problems were indicated with regard to the effectiveness. As the system of medical dispute mediation and arbitration in Korea has no parallel in the world, other countries show many interests in it. The rapid and fair medical dispute resolution is of benefit in both patients and medical institutes and decreases social costs. As the Act had a difficult passage through Parliament, it should be maintained and improved continuously.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.49
• /
• pp.283-324
• /
• 2011

The purpose of this paper is to research the air waybill and the carrier's liability in respect of the carriage of cargo by air under the Montreal Convention of 1999. The Warsaw Convention for the unification of certain rules for international carriage by air was adopted in 1929 and modified successively in 1955, 1961, 1971, 1975 and 1999. The Montreal Convention of 1999 modernized and consolidated the Warsaw Convention and related instruments. Under the Montreal Convention, in respect of the carriage of cargo, the air waybill shall be made out by the consignor. If, at the request of the consignor, the carrier makes it out, the carrier shall be deemed to have done so on behalf of the consignor. The air waybill shall be made out in three orignal parts. Under the Montreal Convention, the consignor shall indemnify the carrier against all damages suffered by the carrier or any other person to whom the carrier is liable, by reason of the irregularity, incorrectness or incompleteness of the particulars and statement furnished by the consignor or on its behalf. The air waybill is not a document of title or negotiable instrument. Under the Montreal Convention, the air waybill is prima facie evidence of the conclusion of the contract, of the acceptance of the cargo and of the conditions of carriage. If the carrier carries out the instructions of the consignor for the disposition of the cargo without requiring the production of the part of the air waybill, the carrier will be liable, for any damage which may be accused thereby to any person who is lawfully in possession of the part of the air waybill. Under the Montreal Convention, the carrier is liable by application of principle of strict liability for the damage sustained during the carriage of cargo by air. The carrier is liable for the destruction or loss of, or damage to cargo and delay during the carriage by air. The period of the carriage by air does not extend to any carriage by land, by sea or by inland waterway performed outside an airport. Under the Montreal Convention, the carrier's liability is limited to a sum of 17 Special Drawing Rights per kilogramme. Any provision tending to relieve the carrier of liability or to fix a lower limit than that which is laid down in this Convention shall be and void. Under the Montreal Convention, if the carrier proves that the damage was caused by the negligence or other wrongful act or omission of the person claiming compensation, or the person from whom he derives his rights, the carrier shall be wholly or partly exonerated from ist liability to the claimant to the extent that such negligence or wrongful act or omission caused the damage. Under the Montreal Convention, any action for damages, however founded, whether under this Convention or in contract or in tort or otherwise, can only be brought subject to the conditions and such limits of liability as are set out in this Convention. Under the Montreal Convention, in the case of damage the person entitled to delivery must complain to the carrier forthwith after the discovery of the damage, and at the latest, within fourteen days from the date of receipt of cargo. In the case of delay, the complaint must be made at the latest within twenty-one days from the date on which the cargo has been placed at his disposal. if no complaint is made within the times aforesaid, no action shall lie against the carrier, save in the case of fraud on its part. Under the Montreal Convention, the right to damage shall be extinguished if an action is not brought within a period of two years, reckoned from the date of arrival at the destination, or from the date on which the aircraft ought to have arrived, or from the date on which the carriage stopped. In conclusion, the Montreal Convention has main outstanding issues with respect to the carrier's liability in respect of the carriage of cargo by air as follows : The amounts of limits of the carrier's liability, the duration of the carrier's liability, and the aviation liability insurance. Therefore, the conditions and limits of the carrier's liability under the Montreal Convention should be readjusted and regulated in detail.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.13
• /
• pp.235-253
• /
• 2000

As to the sphere of application, Article 78 CISG undoubtedly applies to interest on the purchase price. Furthermore, the provision also applies to "any other sum that is in arrears". This language has been interpreted to encompass expenses that one party had on behalf of the other as well as reimbursements when the purchase price is reduced according to Article 50 CISG. However, it is questionable whether this language also extends to claims for damages. Legal scholars seem to agree that one has a right to interest on damage claims under Article 78 if the amount in question has been liquidated vis-a-vis the other party. Whether this right to interest also applies to unliquidated sums, is controversial, however. In this study, as a result of taking into account the puspose of Article 78, we could find the fact that regardless of whether the exact amount of damages has been specified yet, the breaching party still owes compensation to the other party from the time of the breach and, accordingly, the non-breaching party should be entitled to interest payments on the loss from that time. Consequently, Article 78 applies not only to liquidated but also to unliquidated damages.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.20
• /
• pp.213-239
• /
• 2003

This paper intends to describe the liability regime of the air carrier under the Montreal Convention of 1999 for the international cargo, comparing to those of the existing Warsaw Convention system. Also this paper deals with main issues of the Montreal Convention which are relevant for the carrier's liability in the carriage by air of cargo. The Warsaw Convention was adopted in 1929 and modified successively in 1955, 1961, 1971, 1975, and 1999. The Montreal Convention of 1999 modernized and consolidated the Warsaw Convention and related instruments. International air carrier is liable by application of principle of strict liability as stated in the Montreal Convention : The carrier is liable for the destruction or loss of, or damage to cargo and delay during the carriage by air, and the carrier's liability is limited to a sum of 17 Special Drawing Rights per kilogramme. However, the Montreal Convention has main outstanding issues with respect to the liability of the air carrier : potential conflicts between the Montreal Convention and the Warsaw Convention, the amounts of limits of the carrier's liability, the duration of the carrier's liability, the exessive litigation, and the aviation insurance. Therefore, the conditions and limits of the carrier's liability under the Montreal Convention should be readjusted and regulated in detail.

• Journal of Digital Contents Society
• /
• v.17 no.3
• /
• pp.189-195
• /
• 2016

According to the National Statistical Office, the number of fires was the 42,135 items in 2014, it has increased reviews 1203 compare with 2013. In addition, the sum of the property damage 2,560 billion, injured number 1,599 people, it was announced in deaths number 263 people. Although Korea government have announced many fire manuals for fire prevention, the reason that many of the wounded and the dead occurred is because people have recognized fire riskiness in just only head simply from manual. In this paper, the simulation system for prevention of fire based virtual reality is proposed to solve this problems. The people who trained by proposed system can recognize and realize fire riskiness more than fire writing manuals.

• Korean System Dynamics Review
• /
• v.15 no.3
• /
• pp.81-104
• /
• 2014

This study aimed to suggest the directions for the landscape protection of Sindu-ri coastal dune based on its ecological system. The study investigated ecological systems of the coastal dune followed by damage causes of coastal dune according to the land use change, and landscape value of coastal dune in the study area. In order to construct causal-effect feedback loop, systems thinking was performed. Result of this study showed that the area of coastal dune and the amount of sand are maintained by the interaction with sand beach while they are affected by wind direction, wind speed, and dune plants. It was also found that the changes of land use pattern, increasing commercial area, and planted windbreak forest damaged to the coastal dune. In addition, size of coastal dune and growing number of dune plants increased landscape value of coastal dune and tourist draw. However increasing tourists have constantly affected land use changes and have damaged to coastal dune area. In sum, planning for land use regulation, rest-year system areas, promotion and education for coastal dune, dune plants protection, and windbreak management should be taken into account for landscape protection in coastal dune.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.6
• /
• pp.9-18
• /
• 2019

This study derives load characteristics and analyzes the safety of plowshares operating in dry fields. We mounted a three-blade, reversible plow on a 23.7 kW tractor and measured the plow's tractive force as well as the torque from the engine output shaft on the rear axle under various working speeds (L4, M1, M2, M3). We chose a Korean test site of Seomyeon, Chuncheon with sandy soil texture, as determined using the USDA method. We constructed the load spectrum for torque and tractive force using measured data and derived the fatigue life of the plowshare from a stress-cycle (S-N) curve of the plow material. Our results show that the M3 gear maximizes the driving shaft torque loads and, applying the tractive force load spectrum, creates a cumulative damage sum of $4.14{\times}10^{-5}$. Considering sampling time, we estimate a fatigue life of 805 hours while using the M3 gear. When using the other working speeds, however, all of the stress levels fell within the endurance limits and, therefore, our model predicts infinite plowshare lifetimes. For this analysis, we used a yield strength of 1,079 MPa for the plowshare and static safety factors, analyzed using the maximum stress, between 6.83 and 8.63 under each working speed.

• Smart Structures and Systems
• /
• v.30 no.6
• /
• pp.639-648
• /
• 2022

This study aims at numerically and experimentally investigating torsional guided wave mixing with weak material nonlinearity under acoustoelastic effect in tubular structures. The acoustoelastic effect on single central frequency guided wave propagation in structures has been well-established. However, the acoustoelastic on guided wave mixing has not been fully explored. This study employs a three-dimensional (3D) finite element (FE) model to simulate the effect of stress on guided wave mixing in tubular structures. The nonlinear strain energy function and theory of incremental deformation are implemented in the 3D FE model to simulate the guided wave mixing with weak material nonlinearity under acoustoelastic effect. Experiments are carried out to measure the nonlinear features, such as combinational harmonics and second harmonics in related to different levels of applied stresses. The experimental results are compared with the 3D FE simulation. The results show that the generation combinational harmonic at sum frequency provides valuable stress information for tubular structures, and also useful for damage diagnosis. The findings of this study provide physical insights into the effect of applied stresses on the combinational harmonic generation due to wave mixing. The results are important for applying the guided wave mixing for in-situ monitoring of structures, which are subjected to different levels of loadings under operational condition.

• Journal of Conservation Science
• /
• v.37 no.6
• /
• pp.723-737
• /
• 2021

This study analyzed the composition and structure of materials with Buddhist paper scriptures excavated from architectural sites in 'Sum Tolgoi' of the 17^th century and carried out conservation treatment base on the result of the analysis. The scriptures were covered in dust and foreign sub stances, and were so crumpled that it was impossible to identify the form. The damage, loss, and discoloration have been identified. Buddhist scriptures written in Tibetan used indigo and ink sticks on paper as a result of UV-Vis analysis, and ink sticks as black character materials from scriptures written ancient Mongolian. SEM-EDS and Micro-XRF analyses revealed that the outlines were drawn with red lines using a mix of Minium (Pb₃O₄) and Cinnabar (HgS), or Cinnabar (HgS) alone, and the contents of the scriptures were written with silver paint. Silver chloride (AgCl) and Calcium (Ca) were identified in the silver paint component of the characters, while Calcium and Orpiment (As₂S₃) were identified in the yellow lines. Concerning the paper ground, Buddhist scriptures written in ancient Mongolian were characterized by herbal plant fiber and bast fiber, and those written in Tibetan, by bast fiber. Radiocarbon dating indicates that the paper for the scriptures was produced between the 15^th and 17^th centuries. Conservation treatment of the scriptures was carried out based on the experiment on the production of pre-coated paper and how to coat that to prevent the second damage due to the deformation and fragility of the excavated paper. The scriptures were preserved and mounted, and a neutral box was made to identify the contents of the scriptures recorded on both sides after the treatment. This conservation treatment is the result of a study that applied new conservation treatment materials and methods according to the principle of conservation treatment reversibility.