• Structural Engineering and Mechanics
• /
• 제31권1호
• /
• pp.75-91
• /
• 2009

It is known that retaining walls were severely damaged as well in the most recent earthquakes having occurred in the countries in the active seismic belts of the world. This damage can be ascribed to the calculation methods used for the designs of retaining walls in the event of their constructions and employment having been accurately carried out. Generally simplified pseudo-static methods are used in the analysis of retaining walls with analytical methods and soil-structure interaction are not considered. In view of these circumstances, in this article by taking soil interaction into consideration, linear and nonlinear behaviours of retaining walls are analyzed with the assistance of LUSAS which is one of the structural analysis programs. This investigations are carried out per LUSAS which employs the finite element method as to the Erzincan (1992) Earthquake North-South component and the obtained findings are compared with the ones obtained from the method suggested in Eurocode-8, which is still effective today, and Mononobe-Okabe method. Not only do the obtained results indicate the distribution and magnitude of soil pressures are depend on the filling soil but on the foundation soil as well and nonlinear effects should be considered in designs of these walls.

• 한국정밀공학회지
• /
• 제23권9호
• /
• pp.164-173
• /
• 2006

The cooling capacity of a micro-heat pipe is mainly governed by the magnitude of capillary pressure induced in the wick structure. For microchannel wicks, a higher capillary pressure is achievable for narrower and deeper channels. In this study, a metallic micro-heat pipe adopting high-aspect-ratio microchannel wicks is fabricated. Micromachining of high-aspect-ratio microchannels is done using the laser-induced wet etching technique in which a focused laser beam irradiates the workpiece placed in a liquid etchant along a desired channel pattern. Because of the direct writing characteristic of the laser-induced wet etching method, no mask is necessary and the fabrication procedure is relatively simple. Deep microchannels of an aspect ratio close to 10 can be readily fabricated with little heat damage of the workpiece. The laser-induced wet etching process for the fabrication of high-aspect-ratio microchannels in 0.5mm thick stainless steel foil is presented in detail. The shape and size variations of microchannels with respect to the process variables, such as laser power, scanning speed, number of scans, and etchant concentration are closely examined. Also, the fabrication of a flat micro-heat pipe based on the high-aspect-ratio microchannels is demonstrated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.257-258
• /
• 2008

The inrush current of a transformer is a high-magnitude and harmonic-rich current generated when the transformer core is driven into saturation during energizing. The inrush current usually leads to undesirable effects, for example potential damage to the transformer, misoperation of a protective relay, and power quality deterioration in the distribution power system. Inrush current reduction is therefore important for power system operation. In this paper, to reduce the inrush current, the insertion resistance of the Superconducting Fault Current Limiter (SFCL) that is connected in series with the transformer in the distribution system is used. This paper implements the SFCL by using the Electromagnetic Transient Program-Restructured Version (EMTP-RV) to model the SFCL in the distribution system. The simulation results show the beneficial effects of the SFCL for reduction of the inrush current.

• Structural Engineering and Mechanics
• /
• 제27권4호
• /
• pp.425-438
• /
• 2007

Large changes in stiffness associated with cracking and yielding of reinforced concrete sections may be expected to occur during the dynamic response of reinforced concrete frames to earthquake ground shaking. These changes in stiffness in stories that experience cracking might be expected to cause relatively large peak interstory drift ratios. If so, accounting for such changes would add complexity to seismic design procedures. This study evaluates changes in an index parameter to establish whether this effect is significant. The index, known as the coefficient of distortion (COD), is defined as the ratio of peak interstory drift ratio and peak roof drift ratio. The sensitivity of the COD is evaluated statistically for five- and nine-story reinforced concrete frames having either uniform story heights or a tall first story. A suite of ten ground motion records was used; this suite was scaled to five intensity levels to cause varied degrees of damage to the concrete frame elements. Ground motion intensity was found to cause relatively small changes in mean CODs; the changes were most pronounced for changes in suite scale factor from 0.5 to 1 and from 1 to 4. While these changes were statistically significant in several cases, the magnitude of the change was sufficiently small that values of COD may be suggested for use in preliminary design that are independent of shaking intensity. Consequently, design limits on interstory drift ratio may be implemented by limiting the peak roof drift in preliminary design.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권8호
• /
• pp.998-1004
• /
• 2007

Connecting a synchronous generator to a power system is a dynamic process, requiring the coordinated operation of many components and systems. The goal is to connect the oncoming generator to the system smoothly i.e without causing any significant bumps, surges, or power swings, by closing the ACB when the oncoming generator matches the power system in voltage magnitude, phase angle, and frequency. If oncoming generator voltage is not matched to the power system voltage, reactive power will flow either into or out of the system at the instant of ACB closure. If this voltage difference is too great, the reactive power flow may result in high transient stresses that could damage the windings of the generator. Also, if oncoming generator frequency is not matched to the power system frequency, transient power will flow between generator and power system. If the frequency difference is too great, the transient power flow is reflected into the prime mover shaft, and this may result in excessive shaft or coupling stress. This paper tries to prove the necessity of correct synchronization for ship generators through a transient phenomenon analysis.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권4호
• /
• pp.178-182
• /
• 2006

Five model coils of 6.6 kV motor were manufactured with several defects. These stator coils have artificial defects such as void of groundwall insulation, removal of semi-conductive coating and damage of strand insulation. Epoxy-mica coupler(80 pF) was connected to five model coil terminals. The voltage applied to the coils was 3.81 kV, 4.76 kV, 6.0 kV and 6.6 kV, respectively. Partial discharge(PD) tests performed in the laboratory and shield room. Digital PD detector(PDD) and turbine generator analyzer(TGA) were used to measure PD activity. TGA summarizes each plot with two quantities such as the normalized quantity number(NQN) and the peak PD magnitude(Qm). The PD levels in pC were measured with PDD. PD patterns of model coils were indicated the internal and slot discharges. PD patterns are consistent with the result of measurement using PDD and TGA instruments. AC breakdown test was performed on five model coils in order to confirm the result of PD measurements. All the failures were located in a line-end coil at the exit from the core slot.

• 대한기계학회논문집A
• /
• 제37권11호
• /
• pp.1387-1395
• /
• 2013

차륜 불평형은 차륜의 무게중심이 윤축의 기하학적 중심축에서 벗어나 있을 때 발생한다. 차륜 불평형을 수정하지 않고 주행하면 불평형에 의한 원심력이 차체의 진동을 발생시키게 되며 차륜의 마모를 촉진시키거나 차축 베어링에 손상을 주게 된다. 본 연구에서는 철도차량 동적해석을 통하여 차륜 불평형이 차량 임계속도와 차체 진동에 미치는 영향을 검토하였다. 차륜 불평형은 임계속도를 감소시키고 차체 공진을 유발할 수 있음을 알 수 있었다. 또한 차륜의 정적, 동적 불평형에 따른 차체진동을 해석함으로써 불평형 수정은 양면 밸런싱이 필요함을 밝혔다.

• 한국해안해양공학회지
• /
• 제9권3호
• /
• pp.140-154
• /
• 1997

1994년 11월 15일 Philippine의 Mindoro섬 북측에서 강진이 발생하였다. 이 지진으로 발생한 쓰나미는 Mindoro섬 북측 연안 및 Verde섬 등의 연안에 래습하여 해안역이 범남, 침수되었으며 이로 인하여 가옥파괴 등 큰 재산피해와 사상자를 내었다 이 쓰나미는 Luzon섬에도 전파되어 Batangas에서 쓰나미 발생 약 10분후에 쓰나미가(주)한진의 건설현장에서 관측되었다. 본 연구에서는 쓰나미 수치모형을 수립하여 원역 및 범남역의 쓰나미 전파 및 범남을 산정하고 현장관측결과를 비교 검토하였다. 진원이 Luzon섬과 Mindoro섬 사이에 위치하였으며 인근의 지진관측강의 자료가 불충분하여 국제지진 Network상에서 제시한 기본자료를 근거로 여러 경우의 진원모형의 모수들을 가정하여 산정치가 관측치와 유사한 결과를 가질 때까지 모형산정을 하였다. 또한 과학가시화기법에 의해 쓰나미 전파와 범남모형 시뮬레이션 애니메이션 결과로서 제시하였다

• 한국어병학회지
• /
• 제21권3호
• /
• pp.167-174
• /
• 2008

Few studies on parasitic scutica-like ciliates (SLCs) influencing larval growth and survival during the seed production of the Japanese scallop, Patinopecten yessoensis have been performed in spite of relatively high magnitude of their infectious damage to the larvae. In the mass seed production of the scallop, SLCs were never infectious during D-larval stage which lasted 6 to 7 days. Indeed, the infection first occurred in 2 to 4 days after first umbo-staged larvae. A regular selection of active larvae in swimming behavior kept larval SLC infection low throughout the culture compared to unselected control (P<0.05) in which all the larvae alive were contained. Higher infection frequencies of the unselected control resulted in lower larval survivals and wider range of larval size distribution that drove larval attachment rate lower. To the worse, the nursery spats from the higher SLC infection exhibited a retarded growth and elevated occurrence of abnormal scallop.

• Nuclear Engineering and Technology
• /
• 제27권5호
• /
• pp.710-720
• /
• 1995

원자로에서 펌프에 의해 야기되는 맥동 압력은 원자로 내부 구조물에 진동과 손상을 줄 수 있기 때문에 관심이 증가되고 있다. 본 연구에서는 냉각관과 환형관(원자로 압력 용기와 노심 보호 지지대 사이)으로 구성된 기하 형태에서 펌프에 의해 야기되는 맥동 압력을 해석할 수 있는 수력학적 모델을 개발하였다. 수학적 지배 방정식은 압축성, 비점성 유체에 대해 선형화된 Navier-Stokes 방정식이다. 냉각관과 환형관을 따로 분리하여 해석하고 두영역의 커플링 영향을 고려하였다. 또한 본 기하 형태에서 펌프맥동 압력에 영향을 미치는 주요 기하 인자에 대한 평가를 수행하였다. 본 해석 결과와 실험차를 비교하여 만족할 만한 결과를 얻었다.