• Journal of the Korea institute for structural maintenance and inspection
• /
• 제19권2호
• /
• pp.60-67
• /
• 2015

The finite element (FE) model updating is a commonly used approach in civil engineering, enabling damage detection, design verification, and load capacity identification. In the FE model updating, acceleration responses are generally employed to determine modal properties of a structure, which are subsequently used to update the initial FE model. While the acceleration-based model updating has been successful in finding better approximations of the physical systems including material and sectional properties, the boundary conditions have been considered yet to be difficult to accurately estimate as the acceleration responses only correspond to translational degree-of-freedoms (DOF). Recent advancement in the sensor technology has enabled low-cost, high-precision gyroscopes that can be adopted in the FE model updating to provide angular information of a structure. This study proposes a FE model updating strategy based on data fusion of acceleration and angular velocity. The usage of both acceleration and angular velocity gives richer information than the sole use of acceleration, allowing the enhanced performance particularly in determining the boundary conditions. A numerical simulation on a simply supported beam is presented to demonstrate the proposed FE model updating approach.

• Journal of the Korean Society for Nondestructive Testing
• /
• 제24권5호
• /
• pp.476-486
• /
• 2004

This paper is the second part of the study on the development of a smart active layer (SAL) sensor, which consists of two parts. As mentioned in the first paper, structural health monitoring (SHM) is a new technology that is being increasingly applied at the industrial field as a potential approach to improve cost and convenience of structural inspection. Recently, the development of smart sensor is very active for real application. This study has focused on preparation and application study of SAL sensor which is described with regard to the theory and concept of the SAL sensor in the first paper. In order to detect elastic wave, smart piezoelectric sensor, SAL, is fabricated by using a piezoelectric element, shielding layer and protection layer. This protection layer plays an important role in a patched network of distributed piezoelectric sensor and shielding treatment. Four types of SAL sensor are designed/prepared/tested, and these details will be discussed in the paper In this study, SAL sensor ran be feasibly applied to perform structural health monitoring and to detect damage sources which result in elastic waves.

• Journal of Korean Society of Forest Science
• /
• 제76권2호
• /
• pp.145-160
• /
• 1987

To evaluate damage status and necessities of repair works on the forest-side erosion control structures constructed from 1966 to 1986 in Korea, developmental procedures of erosion control structures from the standard unit-cost tables established by the Forestry Administration every year, existing counter-measures for disaster erosion control system administrated by the government organization and existing status of each structure at constructed site were investigated and analyzed integrally. About 10-15% of the constructed forest erosion control structures were required to be repaired as a result of the investigation. It is actually incapable of repairing the damaged forest erosion control structures caused by excessive run-off and floodings under the existing forest-side erosion control systems. Therefore, it is necessary to put regularly repair erosion control system that will be secured by national budgetary pre-allocation system. Especially, it is also necessary to frame a new system that repair erosion control works by national budget (central government) should be possible for any scale of damages in case of the erosion control projects for the disaster counter-measures. The results of this research could be adopted as important policy data for erosion control policy-making in forest-side in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제19권3호
• /
• pp.542-552
• /
• 2018

In this paper, the precast method of a concrete eco-pillar debris barrier was proposed to improve the construct ability and economic efficiency. The performance was validated by experimental and structural analysis. The steel debris barrier has a high construction cost and causes environmental damage with corrosion. The construction of a concrete eco-pillar debris barrier has been increased recently. On the other hand, there are no design standards regarding debris barriers in Korea, and debris barriers are being designed by the experience and sense of engineers. Therefore, in this study, a method to determine the design external forces was proposed and the design was performed by applying a hollow cross-section to the debris barrier. In addition, three types of connection methods of a concrete cantilever column with the maximum bending moment acts were proposed, and validation of the performance of each type was performed with a real-scale experiment. The experimental results showed that the type with loop reinforcement had the highest rigidity and the type with anchorage performance exceeded the maximum bending moment according to the ultimate load. In the manufacturing procedure of mock-up debris barriers, the type with an anchorage-bar was found to have superior construct ability.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• 제15권3호
• /
• pp.83-91
• /
• 2009

It is very difficult to export the fresh agricultural products to long distance countries such as USA and EU without any damage. Fresh products exporting would overcome very severe conditions such as hot and cold weather changes, heavy vibrations with rolling and pitching during the target distribution period, therefore, the packaging needs the immobility of products in the container and the keeping its quality by packaging materials or methods under any surrounding environments, especially. The physical strength of outer box should be designated according to its own characteristics for agricultural product packaging. Packaging dimension which would be fit to standard pallet is also very important factor to reduce the distribution cost. There have been many agricultural products researches for export packaging to the USA so far. However they have never got desirable results which enough to apply it in real. The main purpose of this research is to develop optimum compressive strength and optimum dimension of corrugated fiberboard box which would be used to USA export packaging of fresh melon as well as Japan.

• Journal of Korean society of Dental Hygiene
• /
• 제11권1호
• /
• pp.103-111
• /
• 2011

Objectives : This study of oral health problems was conducted to 311 students in Special Schools in order to inquire into the state of their oral health behaviors, to find out the main obstacles against dental services, to secure dental reasonable basis for oral health promotion. Methods : A questionnaire survey was conducted in the Special School of the 311 students in the area of the metropolitan Seoul. By means of Chi-squared test and Fisher's exact test, oral hygiene habits for each type of the subjects, the contents of dental care services, the prerequisites to improve oral health, were inquired. To evaluate the effects to the current oral health status of types of disability, 2-way ANOVA was practiced. Results : The handicapped with Visual impairment, mental retardation, multiplicity with disabilities, answered negatively in their own oral health status. 47.4% of the deaf can do brush for theirselves without the inconvenience, but in other types of disability they showed that they were helped by others. Subjects did not use the secondary oral hygiene necessaries because, except brain damage, almost of types of disability impeded the convenient use. 60 to 88.2 percent of the total respondents were the recent visitors to dental clinique within 1 year, and the most common motives of the visiting dentist, is a routine medical examination, their movements to the dentist in all types of disabilities, needed helps of others. Most of them received medical treatment at a private dentist, the handicapped preferred the private care and place(49.8%). Only in the case of the brain disorders, extremely much of the disabled answered that they were needed the preventive treatment, and the another cases of disability were largely needed the treatment of the decayed teeth. To improve the oral health of the people with disabilities, at the opening of the clinics and hospitals over a certain size, the mandatory medical facilities for the care of the disabled should be preceded and followed by the improvement of dental insurance system so as to reduce the burdens of the cost of dental care. Conclusions : The improvement of oral health policy for the disabled are needed inevitably: Development of secondary oral hygienic easy to use for the disabled, the building systems of medical dental hospital with the disabled facilities, by the improvement of the insurance system, the reduction of the burden of payments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제18권7호
• /
• pp.417-422
• /
• 2017

One of the most frightening aspects of weapons of mass destruction (WMD) is their ability to cause death in very small quantities without being visible to the public. The military authorities are making considerable effort to ensure the survivability of the combatants in the event of NBC(Nuclear, Biological and Chemical) contamination. Therefore, in this study, modules were developed for the measurement of the positive pressure and for the detection of the chemicals used for the control of the various shut-off valves used in an NBC shelter. In addition, a high performance gas tight shut-off valve was developed that can overcome the disadvantages associated with manual manufacturing, such as the occurrence of defective products and high manufacturing cost. By applying the positive pressure measurement and chemical detection modules, this valve was able to be used to control the facility. The developed gas-tight shut-off valve maintained airtight characteristics at a pressure loss of 28[Pa] at the prescribed wind velocity and an internal pressure of 30[kPa]. It is expected to be possible to control the gas-tight shut-off valve through the remote measurement of the positive pressure, thereby ensuring the foreign independence of import substitution and defense related technology in the future. In addition, by installing these valves in all of the intake ports or exhaust ports connected to the outside of the NBC shelter, it is possible to prevent the damage resulting from the rapid inflow of the storm pressure caused by conventional weapons and nuclear explosions, thereby protecting the people and equipment in the shelter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제18권11호
• /
• pp.725-730
• /
• 2017

The strength ratio of the main structures of buildings gradually increasing, due to the advances made in analysis and cost saving techniques. In this study, to examine the stability of industry buildings using sandwich panels as roof assemblies, we examine the changes in the moment strength ratio of the main structures caused by increasing the roof load. This study adopts the PEB structure and three H-steel structure as the structural analysis models. In the case where the additional load exceeds about 11% of the roof design load, the strength ratio exceeds 1 for the main structure. In the case where the additional load exceeds about 36%(of the roof design load), the working moment exceeds the plastic moments, which leads to major damage to the structure. This study compares 1) the maximum load according to the purlin spaces, 2) the maximum load by KS, and 3) the maximum load calculated from the test results of the manufacturer.The maximum bearing load of the panels determined by all three methods exceeds the structure failure threshold load of the main structure. This study provides evidence that an unexpected increase in the roof load might cause the whole structure to collapse, due to the failure of the main structural members, before the failure of the roof assemblies. Therefore, information on the structural performance of the sandwich panels is required for the structural design, and the sandwich panels should be considered to be an integral part of the overall structural design.

• Journal of Biomedical Engineering Research
• /
• 제27권6호
• /
• pp.418-426
• /
• 2006

In the artificial heart application, productivity and hemodynamic properties of artificial heart valves are crucial in successiful application to long term in vivo trials. This paper is about manufacture and assessment of trileaflet polymer heart valves using vacuum forming process(VFP). The VFP has many advantages such as reduced fabrication time, reproducibility due to relatively easy and simple process for manufacturing. Prior to VFP of trileaflet polymer heart valves, polyurethane(Pellethane 2363 80AE, Dow Chemical) sheet was prepared by extrusion. The sheets were heated and formed to mold shape by vacuum pressure. The vacuum formed trileaflet polymer heart valves fabrication is composed of two step method, first, leaflet forming and second, conduit forming. This two-step forming process made the leaflet-conduit bonding stable with any organic solvents. Hydrodynamic properties and hemocompatibility of the vacuum formed trileaflet polymer heart valves was compared with sorin bicarbon bileaflet heart valve. The percent effective orifice area of vacuum formed trileaflet polymer heart valves was inferior to bileaflet heart valve, but the increase of plasma free hemoglobin level which reflect blood damage was superior in vacuum formed trileaflet polymer heart valves Vacuum formed trileaflet polymer heart valves has high productivity, and superior hemodynamic property than bileaflet heart valves. Low manufacturing cost and blood compatible trileaflet polymer heart valves shows the advantages of vacuum forming process, and these results give feasibility in in vivo animal trials in near future, and the clinical artificial heart development program.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제17권11호
• /
• pp.584-594
• /
• 2016

This research empirically analyzes, from an ecological perspective, whether socio-economic factors of the regions in which the elderly live have any actual influence on thoughts of suicide on the part of the elderly. Microscopic data either included outliers in part of the variables, including income and other variables of that type, from among source data from investigations into actual conditions of the elderly in 2014. Regarding macroscopic data, the indices that represent social and economic situations in each region, which were provided by KOSIS, were selected. Regarding the method of analysis, hierarchical or multi-level analysis models were applied by considering special hierarchical characteristics and heterogeneity at the personal and regional levels. The analyses showed that the following had statistically significant influences: 1. the cost-of-living index and the national basic supply and demand rate of the region; 2. the extent of natural disaster damage; and 3. the number of leisure and welfare facilities for the elderly, compared to the elderly population. Based on the results, proposals are made for systematic and practical endeavors in the community.