• 한국농공학회논문집
• /
• 제52권4호
• /
• pp.73-81
• /
• 2010

The cemented sand and gravel (CSG) method is a construction technique that adds cement and water to rock-like materials, such as rivered gravel or excavation muck which can be obtained easily at areas adjacent to dam sites. This study was performed to evaluate the compaction and compressive strength properties of stress-strain, elastic modulus and fracture mode CSG materials reinforced polypropylene fiber. Polypropylene fiber widely used for concrete reinforcement is randomly distributed into cemented sand. The two types of polypropylene fiber (monofillament and fibrillated fiber) were used and fiber fraction ratio was 0, 0.2 %, 0.4 %, 0.6 % and 0.8 % by the weight of total dry soil. The effect of fiber fraction ratio and fiber shape on compaction and compressive strength were investigated. The optimum moisture contents (OMC) of CSG material increased as fiber fraction increased and the dry density of CSG material decreased as fiber fraction. Also, the maximum increase in compressive strength was obtained at 0.4 % content of monofillament and fibrillated fiber. CSG material behaviour was controlled not only by fiber fraction but also fiber distribution, fiber shape and fiber type.

• 한국안전학회지
• /
• 제31권2호
• /
• pp.76-82
• /
• 2016

A 2-D hydrodynamic model for predicting the movement of debris flow was developed. The developed model was validated against a dam break flow problem conducted in EU CADAM project, and the performance of the model was shown to be satisfactory. In order to suggest structural alternative for hazardous zone vulnerable to debris flow disaster, two types of initial mass distribution and two shapes of defensive structure were considered. It was found that 1) the collapse of debris mass initiated with square pyramid shape induced more damage compared with that of cubic shape; and 2) a defensive structure with semi-circular shape was vulnerable to debris flow disaster in terms of debris control or primary defense compared with that of rectangular-shaped structure.

• 한국환경과학회지
• /
• 제24권7호
• /
• pp.907-915
• /
• 2015

The tap water is generally known to be corrosive in the pH range at 6.5 ~ 7.5. And the degree of corrosion varies depending on the types of raw water such as river surface water or lake water of the dam. Although several corrosion index represents the corrosivity of tap water, the typical corrosion indexes such as Langelier saturation index (LI) and calcium carbonate precipitation potential (CCPP) were calculated to monitoring the corrosive water quality about raw and tap water in water distribution system. To control the corrosive water quality, the correlation between corrosion index and water quality factors were examined. In this study, corrosion index (LI, CCPP) and the pH was found to be most highly correlated.

• 대한한방내과학회지
• /
• 제25권4호
• /
• pp.34-44
• /
• 2004

Objective : The purpose of this study is to investigate clinical characteristics with 25 patients who have suffered from headache and were treated. Methods : We classified 25 patients into several groups by IHS classification and evaluated the effects of oriental medical therapy on headache. Results : 1. According to the statistics, instances of migraine were more prevalent than tension headache, especially among women. 2. 28% of patient had entered for treatment within one month of onset. 3. Common associated symptoms included dizziness, nausea, dyspepsia, palpitation and insomnia. 4. In classification by the oriental medical differentiation of symptoms and signs, the rate of stagnation of the humid dam and deficiency of qi, these two types were highest. 5. 56% of patients said they were satisfied with the treatment, reporting half the frequency of headache or better from before treatment. Conclusions : The present results suggest that oriental medical therapy has effects on headache. Further clinical comparative studies on herb-medication versus acupuncture therapy for headache are urged.

• 한국과학교육학회지
• /
• 제7권2호
• /
• pp.21-35
• /
• 1987

Polyurethane foam was utilized to collect protists from the 2 ponds in Seoul National University and another pond in vicinity of Paldang Dam. The identified protists were 4 species in Cyanophyta, 2 species in Euglenophyta, 19 species in Chrysophyta, 9 species in Chlorophyta, 2 species in Ciliophora, and 3 species in Sarcodian. To test the adoptability of the sampling method for classes in junior and senior high school, frequency of the 25 protists in each observation and in each preparation were calculated. The families which were present at high frequencies were Naviculaceae. Fragilariaceae, Cymbellaceae and Coelastraceae. In an experimental application of the 40 pictures taken from the samples, students in junior classes recognized the protists by their outer morphology, internal structure. color, and colonial types, in decreasing order. Use of the collecting method and the applicability of protists for teaching biology were discussed.

• 한국유체기계학회 논문집
• /
• 제14권4호
• /
• pp.38-44
• /
• 2011

This paper deals with the detail rotordynamic analysis for BB5 eight stages pump as development of API 610 BB5 type pump. Dry-run analytical model, not considering operating fluid, and wet-run analytical model, considering operating fluid are established. In addition, plain circular and pressure dam bearings are chosen and it was discussed that each bearing has an effect on dynamic characteristics of pump rotor system. A rotordynamic analysis includes the critical speed map, Campbell diagram, stability, and unbalance response. As results, it was predicted that rated speed of the pump rotor passes through 1st critical speed in dry-run condition regardless of bearings, however, it was verified that, in wet-run condition, the rotor system doesn't have critical speeds even if more than twice rated speed. Hence the resonance problem caused by the critical speeds does not happen since actual operating is in wet-run condition including operating fluid. As a result of unbalance response analysis, the pump rotor has stable vibration response at rated speed, regardless of operating fluid and the proposed bearing types.

• 한국농공학회논문집
• /
• 제52권1호
• /
• pp.51-59
• /
• 2010

The cemented sand and gravel (CSG) method is a construction technique that adds cement and water to rock-like materials, such as rivered gravel or excavation muck which that can be obtained easily at areas adjacent to dam sites. This study was performed to evaluate the unconfined compressive strength properties and freezing and thawing resistance of CSG materials with unit cement content. The three types of CSG-80, CSG-100 and CSG-120 with cement content were designed to evaluate the optimum water content, dry density, strength, stress-strain, micro structure and durability factor. As the results, the optimum water content ratio with cement content showed almost similar tendency, and the unconfined compressive strength and dry density increased as cement content increases. The strength ratio of 7 days for 28 days were in the range of 55~61 % and the strain ratio in stress-strain curve were in the range of 0.8~1.6 % nearby maximum strength in 28 days. It is expected that this study will contribute to increasing application of CSG method as well as to increasing the utilizing of CSG materials as a environmentally friendly CSG method.

• Journal of Information Processing Systems
• /
• 제1권1호
• /
• pp.14-21
• /
• 2005

Even though mainly statistical methods have been used in anomaly network intrusion detection, to detect various attack types, machine learning based anomaly detection was introduced. Machine learning based anomaly detection started from research applying traditional learning algorithms of artificial intelligence to intrusion detection. However, detection rates of these methods are not satisfactory. Especially, high false positive and repeated alarms about the same attack are problems. The main reason for this is that one packet is used as a basic learning unit. Most attacks consist of more than one packet. In addition, an attack does not lead to a consecutive packet stream. Therefore, with grouping of related packets, a new approach of group-based learning and detection is needed. This type of approach is similar to that of multiple-instance problems in the artificial intelligence community, which cannot clearly classify one instance, but classification of a group is possible. We suggest group generation algorithm grouping related packets, and a learning algorithm based on a unit of such group. To verify the usefulness of the suggested algorithm, 1998 DARPA data was used and the results show that our approach is quite useful.

• 대한원격탐사학회지
• /
• 제22권3호
• /
• pp.175-182
• /
• 2006

Because of the phenological variation of vegetation growth in temperate region, it is often difficult to accurately assess the surface conditions of agricultural croplands, grasslands, and disturbed forests by multi-spectral remote sensor data. In particular, the spectral similarity between soil and dry vegetation has been a primary problem to correctly appraise the surface conditions during the non-growing seasons in temperature region. This study analyzes the spectral characteristics of the mixture of dry vegetation and soil. The reflectance spectra were obtained from laboratory spectroradiometer measurement (GER-2600) and from EO-1 Hyperion image data. The reflectance spectra of several samples having different level of dry vegetation fractions show similar pattern from both lab measurement and hyperspectral image. Red-edge near 700nm and shortwave IR near 2,200nm are more sensitive to the fraction of dry vegetation. The use of hyperspectral data would allow us for better separation between bare soils and other surfaces covered by dry vegetation during the leaf-off season.

• 한국측량학회지
• /
• 제28권1호
• /
• pp.133-142
• /
• 2010

국토의 구성 및 변화를 파악하기 위해서 항공 라이다 데이터의 효율적 처리를 통해 정확하게 지표의 유행(land-cover type)을 분류할 수 있는 지능형 지형 분류기(intelligent topographical classifier)의 필요성이 증대되고 있다. 본 연구에서는 정확하고 효율적인 지형 분류기 개발을 용이하게 하기 위해 데이터마이닝 도구인 WEKA를 연동시켜 항공 라이다 데이터를 가공처리하고 다양한 데이터마이닝 기법을 활용한 비교 실험을 통해 정확성이 높은 지형 분류기 제작을 지원하는 소프트웨어 시스템을 개발하였다. 본 연구에서 개발한 지형 분류기 제작 지원 시스템은 항공 영상 이미지 위에 라이다 데이터를 중첩시키는 기능, 효율적인 처리를 위한 타일링 기능, 부분 영역의 3차원 시각화 기능, 타일의 특정 추출 기능, WEKA 입력 자동 생생 기능, 분류 모델의 분류 규칙 집합을 C++ 프로그램으로 자동 코딩하여 분류기로 변환하는 기능, 타일별 지형 분류 결과 표시 기능 등이 구현되어 있다. 또한, 연동된 WEKA틀 이용해서는 분별력이 높은 특정 정보 선정 기능, 다양한 분류 기법을 적용한 지형 분류 모델 생성 기능, 지형 분류 규칙 집합 생생 기능 등을 활용하여 지형 분류기 제작을 지원할 수 있다. 따라서 항공 라이다 데이터를 이용하여 지형의 유형을 분류하는 지능형 지형 분류기를 개발하고자 하는 사용자는 본 연구에서 개발한 지형 분류기 제작 지원 시스템을 활용하여 해당 지형의 특성에 맞고 분류기 개발 목적에 부합하는 지형 분류기를 용이하게 효과적으로 개발할 수 있다.