• Journal of computational fluids engineering
• /
• v.2 no.1
• /
• pp.117-128
• /
• 1997

Effects of dam and weir on the fluid flow and behavior of inclusions in the continuous casting tundish have been studied using the CFD (Computational Fluid Dynamics) technique. Inclusions affecting the quality of steel products have been considered to be passive: the fluid flow has been obtained for unstaggered grid points defined on body-fitted generalized cuvilinear coordinates with no attention on inclusions, and the spatial propagation of inclusions has been determined by using the flow field data. The result show that the dam and weir direct the flow to the free surface and increase the residence time of inclusions significantly, and thereby that inclusions have much more chance to be floated to the free surface of the tundish where it is eliminated. It is also found that they offer more margin on the geometric design of exit nozzles connected to moulds. This finding is particularly important for twin casting operations where the quality of steel products from the two moulds be kept uniformly.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.1
• /
• pp.13-17
• /
• 2004

The aim of this study was to investigate genetic development and genotype${\times}$environment interactions (GEI) in postweaning body weight of fattening bulls at the end of test period (WT-T) under various beef fattening environments. Data on a total of 24,247 fattening bulls obtained from the industrial farm, breeding farms and testing stations were used. Heritability estimates for WT-T in all environments were nearly similar. Significant genetic developments of sire, dam and progenies for WT-T were observed in all environments. However, many differences in annual genetic developments between the environments were significant. The genetic correlations for WT-T between industrial farm and breeding farms, industrial farm and testing stations and breeding farms and testing stations were respectively 0.004, 0.004 and 0.013. These low estimates of genetic correlations and significant differences in genetic developments among environments clearly show the existence of GEI for WT-T among various fattening environments. Results of this study indicate the need for environment-specific genetic evaluation and selection of beef bulls for commercial beef production.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.613-616
• /
• 2005

In general, the hollow jet valve, the fixed cone valve had been used for the urgency released or maintenance of the flow rate. Nowadays, the butterfly valve, the gate valve are applied in economic performance and operation maintenance more than the hollow jet valve, the fixed cone valve. However, in the case of butterfly valve, it should be required the strict application standard to the cavitation coefficient because the structural axis and disk were situated in pipe channel and the occurring the shock problem by Karman Vortex. And, the judgment data for choice were slight lowdown in water supply and drainage facilities standard or Japanese penstock technology standard, various standard of KOWACO etc. Therefore. there were investigated the valve inside phenomenon (cavitation, disk chattering, vibration) by velocity of flow and the stability examination of body by high velocity of flow through flow scale model test using the numerical analysis and PIV to establish the applicable extensibility of the butterfly valve for the urgency released valve.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4239-4249
• /
• 2011

In the country with frequent earthquakes like Japan, resistance to earthquake is assessed on the basis that Dam body's Face slab is destroyed by concentrated stress. In our country this kind of modeling and analysis is not yet definitely established. This paper performed pseudo static analysis and dynamic analysis for CFRD and evaluated reliability with the results of Shaking Table Test. The Seismic coefficient method, modified seismic coefficient method, Newmark method of Pseudo-static analysis and frequency domain response analysis, time domain history analysis of dinamic analysis were used. The analysis results were differ between analysis method, but the trends of acceleration and displacement were good agreement with the results of shaking table test.

• Journal of Environmental Impact Assessment
• /
• v.15 no.6
• /
• pp.407-415
• /
• 2006

This study carried out submerged area due to Dam construction in the near future. It includes species classification of plant, survey of community structure, examination of pollutant load and assessment of water quality impact. The vascular plants of this area are listed 224 taxa; 64 families, 168 genera, 193 species, 30 varieties and 1 form. This study area is classified into total 21 communities, most community was consist of grass vegetation. Among the communities, Erigeron annuus ($869,286m^2$, 22%) community was dominant and Erigeron annuus-Avena fatua comminity (16%) was subdominant until May, and then Erigeron canadensis community occupied most area to $1,774,985m^2$ (32%) from May to July. For the evaluation of water quality impact due to submerged macrophyte, nutrient release test was conducted both dead body macrophyte and living body macrophyte. The results of release test show that T-N is not released at dead body macrophyte, but it is released at living body macrophyte, especially living body Artemisia priceps var. orientalis shows 1.436mgN/g. At release test of dead body macrophyte, T-P release rate of Erigeron annuus shows 0.500mgP/g at the top of them and it also shows 0.436mgP/g at Erigeron annuus of living body macrophyte. T-N load of submerged macrophyte shows 0.76% by comparison of total load on watershed and T-P load of that shows 3.61%. In case of removal macrophyte for reduction of pollutant load in submerged area, T-N load of submerged macrophyte changes from 0.76% to 0.15% by comparison of total load on watershed and T-P load of that changes from 3.61% to 0.72%.

• Animal Bioscience
• /
• v.37 no.3
• /
• pp.419-427
• /
• 2024

Objective: The objective of this study was to obtain (co) variance components and genetic parameter estimates for post-weaning body measurements such as body length (BL), height at withers (HW), and chest girth (HG) recorded at six (SBL, SHW, and SHG), nine (NBL, NHW, and NHG) and twelve (YBL, YHW, and YHG) months of age along with yearling weight (YW) in Nellore sheep maintained at livestock research station, Palamaner, Andhra Pradesh, India and also the association among body measurements with YW was studied. Methods: Data on 2,076 Nellore sheep (descended from 75 sires and 522 dams) recorded between 2007 and 2016 (10 years) were utilized in the study. Lambing year, sex of lamb, season of lambing and parity of dam were included in the model as fixed effects and ewe weight was kept as a covariate. Analyses were conducted with six animal models with different combinations of direct and maternal genetic effects using restricted maximum likelihood procedure. Best model for each trait was determined based on Akaike's information criterion. Results: Moderate estimates of direct heritability were obtained for the studied traits viz., BL (0.02 to 0.24), HW (0.31 to 0.49), and CG (0.08 to 0.35) and their corresponding maternal heritability estimates were in the range of 0.00 to 0.07 (BL), 0.13 to 0.17 (HW), and 0.07 to 0.13 (CG), respectively. Positive direct genetic and phenotypic correlations among the traits and they ranged from 0.07 (YBL-YW) to 0.99 (SBL-SHG, SHG-YW, and NBL-YBL) and 0.01 (SBL-YBL) to 0.99 (NBL-NHG), respectively. Further, the genetic correlations among all the body measurements and YW were positive and ranged from 0.07 (YW and YBL) to 0.99 (YW and SHG). Conclusion: There was a strong association of chest girth at six months with YW. Further, it is indicated that moderate improvement of post-weaning body measurements in Nellore sheep would be possible through selection.

• Journal of Korea Multimedia Society
• /
• v.21 no.12
• /
• pp.1431-1438
• /
• 2018

In this paper, we proposed a river water level detection and tracking of the river or dams based on image processing system. In past, most of the water level detection system used various water sensors. Those water sensors works perfectly but have many drawbacks such as high cost and harsh weather. Water level monitoring system helps in forecasting early river disasters and maintenance of the water body area. However, the early river disaster warning system introduces many conflicting requirements. Surveillance camera based water level detection system depends on either the area of interest from the water body or on optical flow algorithm. This proposed system is focused on water scaling area of a river or dam to detect water level. After the detection of scale area from water body, the proposed algorithm will immediately focus on the digits available on that area. Using the numbers on the scale, water level of the river is predicted. This proposed system is successfully tested on different water bodies to detect the water level area and predicted the water level.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.4
• /
• pp.33-38
• /
• 2018

The internal erosion due to poor compaction of the material was the main cause of collapse of the embankment in Korea. The assessment of the compaction state of the dam body was a very important check in the safety diagnosis of the embankment. In this study, the correlation between dynamic cone penetration test and plate loading test which is the most typical compaction evaluation technique was analyzed to verify the applicability of the dynamic cone penetration test in evaluating the compaction state of the dam body. The standard penetration tests were carried out six times to define soil properties and depth of the test site. The spatial distributions were obtained by the Kriging method after 15 times of plate loading tests and 47 times of dynamic cone penetration tests. The Pearson correlation coefficient between the spatial distribution of the plate loading test and the dynamic cone penetration test spatial distribution at the constant penetration depth was calculated. The load distribution in the plate loading test and the blow counts at penetration depths of 5 cm, 10 cm and 15 cm in the dynamic cone penetration test showed a weak positive correlation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.5
• /
• pp.475-479
• /
• 1998

Data on body weights were analyzed in the four genetic groups from all possible crosses of two subspecies of mice to estimate average direct genetic effects (ADGE), average maternal genetic effects (AMGE) and heterotic effect (HE). The genetic groups used were $CF_{{\sharp}1}$ laboratory mouse (Mus musculus domesticus), Yonakuni wild mouse (Yk, Mus musculus molossinus yonakuni) and two reciprocal $F_1$ crosses of them, CY and YC. First symbol in the reciprocal $F_1$ represent subspecies of dam. Body weight at 1 (Wk1), 3 (Wk3), 6 (Wk6) and 10 weeks of age (Wk10) were analyzed from 258 mice of the four genetic groups. The model used to evaluate body weights included main effects of genetic group and sex, and interaction effect between genetic group and sex. The ADGE and the AMGE were estimated as deviations of Yk from $CF_{{\sharp}1}$. The HE was estimated from the differences between the reciprocal $F_1$ and the midparent mean. Results of this study showed that all effects, except sex and interaction between genetic group and sex at Wk1 and Wk3, were highly significant source variation (p < 0.01). The ADGE were positive and highly significant (p < 0.01) at all ages studied for both sexes, while the AMGE were highly significant at Wk3, Wk6 and Wk10. The ADGE were larger in contributing effect on body weight differences than the AMGE. The positive value of the HE were observed at all ages for males, while for females the positive effects occured from birth through weaning.

• Korean Journal of Poultry Science
• /
• v.25 no.1
• /
• pp.1-9
• /
• 1998

This study was carried out to get the basic and applicable data for breeding plan and selection in order to improve the body shape components in Korean native chicken. The hentabilities and genetic correlations on body shape components were estimated by sire, dam and combined components of variance. Data analyzed were records of 1,096 progenies produced from 180 dams and 26 sires from April, 1994 to September, 1995. On body shape components at 4, 8 and 16 weeks of age, the shank lengths were 55.63, 82.94 and 103.8Omm: breast girths were 15.087, 21.069, and 26.137mm: breast widths were 40.910, 54.575 and 73.088mm, respectively. The estimates of hentabilities of body shape components based on the variance of sires, dams, and combined components at 4, 8 and 16 weeks of age were O.O65~O.197, O.25O~O.794 and O.185~O.495 for shank length: O.123~O. 215, O.033~O.513 and 0.063~0.257 for breast girth; 0.024~0.158, 0.118~0.410 and 0.111~0.222 for breast width, respectively. The coefficients of genetic correlations among the body shape components at 4 weeks of age were 0.565, 0.725 and 0.678 for breast girth with breast width, shank length and tibia length : 0.690 and 0.804 for breast width with shank length and tibia length; 0.972 between shank length and tibia length.