• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.159-164
• /
• 2000

In this study, the deformation analysis of 80mm optical disk holder considering the creep characteristics of plastic materials has been conducted and experimentally verified. It is very important to remedy the unrecoverable creep deformation and relaxation of holding force of an optical disk holder for the reliability of DVDR-P, DVD-ROM. A disk holder inserted in a cartridge case has been kept in the chamber with $60^{\circ}C$ temperature and 90% humidity for 24 hours. After storage test, the arm span and holding force of a disk holder have been measured after 24 hours at room temperature and normal humidity. The predicted results are in good agreement with experimentally measured one.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.67-69
• /
• 1998

The cogging torque in the small BLDC motors used in the DVD driving system or HDD driving system can cause some serious vibration problem. In this paper, some core shapes that reduce cogging torque are found by using reluctance network method(RNM) for magnetic field analysis and genetic algorithm(GA) for optimization. The outer rotor type BLDC motor for the DVD ROM driving system has been optimized as an sample model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.580-586
• /
• 2005

In this study, experimental tests for driving noise of various optical disk drives (ODD) have been performed using 1/2' microphone noise measurement system. Several new and old ODD models by different manufacturers are practically considered and compared far realistic driving conditions. Sound insulation case with absorbing material fur the present experimental tests is designed and constructed using CATIA system. It is found that average data transfer rate, operating RPM, and sound noise level seems to be different for the same opposed speed ODD by different manufacturers. Moreover, driving sound noise level can be largely affected by both tray shape and driving speed even for the same apparent data transfer rate.

• Journal of Applied Reliability
• /
• v.9 no.1
• /
• pp.1-12
• /
• 2009

BLDC motors are stored in the devices such as CD-RW, COMBO, DVD-ROM and CD-ROM. It is indispensable to establish reliability assessment criteria for BLDC motors, especially in the world where IT grows rapidly. In this article, reliability certification procedure is given. The reliability certification procedure consists of two separate tests such as quality certification test and lifetime test. The former quality certification test comprises general performance test and environmental test. Items which pass the test undergo lifetime test which guarantees the extent of mean lifetime with certain confidence.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.10 s.103
• /
• pp.1169-1176
• /
• 2005

In this study, experimental tests for driving noise of various optical disk drives (ODD) have been performed using 1/2' microphone noise measurement system. Several new and old ODD models by different manufacturers are practically considered and compared for realistic driving conditions. Sound insulation case with absorbing material for the present experimental tests is designed and constructed using CATIA system. It is found that average data transfer rate, operating RPM, and sound noise level seem to be different for the ODD models with same denoted speed by different manufacturers. Moreover, driving sound noise level can be largely affected by both tray shape and driving speed even for the condition of the same apparent data transfer rate.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.496-503
• /
• 2001

The suspension of the optical pickup actuator is damped by the presence of silicone rubber damper bond at its termination. In spite of the presence of it, the actuator still exhibits a strong mechanical resonance which affects its settling time and vibrational characteristics. This resonance can cause errors in reading information from the disk, particularly in high speed CD-ROM and DVD-ROM drives. Ferrofluids are stable colloidal suspensions of sub-micron sized magnetic particles in a carrier liquid. In the actuator design, ferrofluid is applied to the surface of the magnets until the quantity is sufficient to maintain intimate contact with the bobbin/carrier assembly. The fluid is retained in the magnetic field and its viscosity provides the desired mechanical damping to the moving assembly, improving the actuators settling time and vibrational characteristics. Access time is also improved, particularly on warped or eccentric discs.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.167-170
• /
• 2001

본 논문에서는 미국에서 고 선명(High Definition) TV를 위한 오디오 표준인 ATSC에 의해서 채택되고, DVD의 오디오 코덱으로 널리 채택된 Dolby AC-3 복호화기를 고정 소수점으로 변환한 후, ARM929T를 기반으로 실시간 구현하였다. 실시간 구현에 사용된 ARM920T 는 저전력 소비형 32-비트 고정 소수점 RISC 구조이며, 명령어 Cache 와 데이터 Cache, MMU(Memory Management Unit)로 구성되어 있다. 그리고 200MIPS 의 성능을 가지고 있어, 음성/오디오, 통신, 디지털 셀룰라폰에 적용할 수 있고, ASIC 화 할 수 있는 장점을 가지고 있다. 구현된 AC-3 복호화기는 약 67MIPS(6 채널, 640kbps, 48KHz)의 복잡도를 나타내며, 사용된 메모리양은 프로그램 ROM 23.3K Bytes, 데이터 ROM(table) 4.62K Bytes 및 RAM 45K Bytes 이다. 구현된 AC-3 복호화기는 Dolby사에서 제공하는 40 개의 test 벡터들을 bit-exact하게 통과하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.958-961
• /
• 2002

The optical disk drive is a basic option on the PC now. So the lower price and higher read/write speed goods are now on market. These trends make many difficulties to produce more reliable drives, comparing when they are treated as high price stuff. In mechanical terms, the lower price and higher read/write speed drive make higher vibration and noise, lower stiffness, even severe fracture of cheap and low quality disk, problems. Due to the internal crash of P/U inside of the drive, the failure of drives, inferior drives, increase more and more by the careless transportation and the originated low stiffness parts. This report is the introduction of the FE simple model to decrease the internal P/U crash problems, and the results.

• Optical Science and Technology
• /
• v.8 no.2
• /
• pp.14-21
• /
• 2004

캠코더, 빔 프로젝터, 대형 프로젝션 TV, CD-ROM 드라이버, DVD Player, 레이저 프린터 등의 많은 광학 제품들이 대중화되어 일반 소비자에게 널리 판매되고 있다. 제품 및 서비스의 디지털화에 부합하여 이들 광학 제품의 시장 규모와 중요성은 점점 커지고 있다. 본 기사에서는 최근 광학제품의 핵심부품으로서 널리 이용되고 있는 비구면 렌즈의 제조 과정에서 CAD/CAM 응용기술이 어떻게 활용될 수 있는 지를 살펴보고자 한다. CAD/CAM이란 Computer Aided Design과 Computer-Aided Manufacturing의 약어로써 제품의 설계와 제조 과정에서 컴퓨터를 활용하는 기술을 의미한다.(중략)

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1998.06b
• /
• pp.105-110
• /
• 1998

This paper proposes a method to manage individual information on large scale distributed geographic information systems. On such system, ordinary users usually cannot alter the contents of the server. The method proposed in this paper makes possible to alter the contents or add individual data onto such kinds of non-write-permitted data onto set. We call the method as GDSF, ‘geographic differential script file’. In this method, a client user makes a GDSF which contains the private information to be added onto the served data. Then, the client keeps the file on a local disk. After this, when the user uses the data, he applies the differential data sequence onto the down loaded data to restore the information. The GDSF is a collection of picture commands which tell pictures insertions, deletions, and modification operations. The GDSF also can contain the modification. The GDSF also can contain the modification of the attribute information of geographic entities. The method also applicable to modify data on a ROM device, for example CD-ROM or DVD-ROM. This paper describes the method and experimental results.