• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.727-728
• /
• 2010

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.786-790
• /
• 2001

In this paper, we propose an optimum design method for optical pick-up actuators. Using this method, we can design an optimal pick-up actuator having the required tracking/focusing performances. Also, the designed actuator has the small mass, force constant for small size of magnetic circuit and large resistance for reduction of heat generation. Simulation results show that this method can be potentially implemented in all the pick-up actuators.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 제15회 정기총회 및 동계학술발표회
• /
• pp.14-15
• /
• 2004

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.378-380
• /
• 2002

There has been lower the tilt margin by the increase of coma aberration due to the reduction of wave-length and the increase of numerical aperture for high density recording. The RF signal degradation is increased as the decrease of tilt margin. To compensate the tilt margin, the optical pick-up actuator for high-speed CD/DVD re-writable system should be able to drive the radial-tilt motion. We announce that the 3-axis drive actuator for high-speed CD/DVD rewritable system. And what was more, the DC/AC sensitivities of this actuator are suitable fur the low-speed playability, the high-speed readability and the high-speed rewritability.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.49-50
• /
• 2007

• 대한기계학회논문집A
• /
• 제32권12호
• /
• pp.1102-1106
• /
• 2008

Microfluidics deals with the behavior, precise control and manipulation of fluids at a micro scale. It has become increasingly prevalent in various applications such as biomedical applications (diagnostics, therapeutics, and cell/tissue engineering), inkjet head, and fuel cells etc. The issue of inspection and characterization of microfluidics has emerged as a major consideration in design, fabrication, and detection of microfluidic devices. In this paper, we characterize a diffusion based mixing in Y-microchannel using a fluorescent optical scanner based on a DVD pick-up module, which is widely used in optical storages. Using fluorescent dye, we measure the fluorescent intensity that represents the mixing patterns in Y-microchannel. We also compare these experimental results with computational fluid dynamics (CFD) simulation ones. It is shown that the proposed optical scanner can be used as an alternative measurement system with high performance and cost-effectiveness, compared to conventional optical tools such as epifluorescent microscopes using high resolution CCD camera and confocal microscopes with photomultiplier (PMT) detectors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.1009-1012
• /
• 1999

Recently, there is a strong need of DVD (Digital Versatile Disk) system of high density. high speed, and high accuracy System performances mostly depend on not only optical system, but also servo technology to drive it. Therefore, we investigate main technology concerned with optical pick-up unit based on 4.7GB DVD-RAM and analyzes technology of optical and servo systems that are required for high density high speed and high accuracy from the viewpoint of control. And then, we design a linear controller based on specification of 4.7GB DVD-RAM that is commercially available now. We analyze the dynamic characteristics of optical system that is coupled with control system and verify effect on performance indices of servo due to Parameter variation of pick-up by simulation. Finally, we will propose controller design specifications and provide direction of technical development for servo system and problems coupled with high capacity for 15GB level in the future.

• 한국정밀공학회지
• /
• 제16권5호통권98호
• /
• pp.124-131
• /
• 1999

DVD(Digital Versatile Disk) is the data storage media devised to make high storage density and high speed data input/output possible. For example, a whole length movie can be stored in a disk as large as a CD(Compact Disk). Therefore higher rotational speed and better accuracy in optical pick-up are required compared with the existing optical storage device. Without these operational functional requirements being satisfied DVD will lose its place as the high capacity storage device. This paper evaluated whether the currently developed DVD satisfies the requirements and provides improved methods with the Axiomatic Approach which is superb in evaluating and designing newly concepted designs.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.777-781
• /
• 2002

Recently, an optical disc system has been proposed using blue laser diode, high NA objective lens and groove only disc structure. A new method is needed to readout CD and DVD in this blue system. In order to readout CD and DVD in HD-DVD system, we adopted dual-lenses actuator in consideration of optical utilization efficiency, optical performance and insurance of sufficient W.D (working distance). This dual-lenses actuator has two objectives in radial direction, one is for CD/DVD and the other is for HD-DVD. We had to solve the induced problems of DC tilt increase, $2^{nd}$ resonance deterioration and AC sensitivity drop caused by disposing two lenses in an actuator. Especially, to solve AC sensitivity drop, we introduced two 2-pole magnets and separated focus and track magnetic circuits. Consequently we presented that dual-lenses actuator has been possessed good performance. And we measured eye patterns of CD, DVD and HD-DVD by using HD-DVD optical pick-up with dual-lenses actuator.

• 전자공학회논문지T
• /
• 제36T권2호
• /
• pp.32-41
• /
• 1999

CD(Compact Disc) 호환성을 가지는 고밀도 재생전용 및 기록재생용 DVD(Digital Video Disc) 기기의 광학픽업 2중 엑츄에이터 구조를 콤팩트하게 할 수 있는 단일 엑츄에이터 설계법을 제시한다. 설계된 엑츄에이터는 가동부에 CD용 대물렌즈와 DVD용 대물렌즈를 함께 장착하고, 사용 디스크에 따라 가동부를 축주위로 회전시켜서 대물렌즈를 전환하는 축습동형 구조를 하고, 자기 스프링에 의하여 부동된다. 감쇠방식으로서는 가동부와 축사이의 쿨롱마찰을 이용하고, 가동부는 유한요소법(FEM)을 통해, 서보대역내에서 2차 진동모드가 발생하지 않도록 한다. 본 논문의 설계법을 검증하기 위하여 시제품을 제작하고, 동특성을 측정, 평가한다.