• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.58-65
• /
• 2016

Satellite communication is a wide area network (WAN) which provides communication service worldwide. However, the performance of TCP can be seriously degraded in the satellite networks due to limited bandwidth, long round-trip time (RTT) and high bit error rate (BER) over satellite links. In order to improve the performance of TCP, this paper proposes cross-layer Performance Enhancing Proxy (PEP) in digital video broadcasting-return channel via satellite (DVB-RCS) networks. The proposed protocol sets TCP Congestion Window (CWND) size by using satellite resource allocation information exchanged between TCP and the link-layer. we implement PEP testbed based on Linux to evaluate the performance of the proposed protocol. The simulation results show that the proposed protocol performs better than standard TCP both in single and multiple sessions in variant BER, because the proposed protocol sets TCP CWND size by using satellite resource allocation.

• Journal of Communications and Networks
• /
• v.13 no.5
• /
• pp.518-524
• /
• 2011

A high assurance IP encryption (HAIPE) compliant protocol accelerator is proposed for military networks consisting of red (or classified) networks and black (or unclassified) networks. The boundary between red and black sides is assumed to be protected via a HAIPE device. However, the IP layer encryption introduces challenges for bandwidth on demand satellite communication. The problems experienced by transmission control protocol (TCP) over satellites are well understood: While standard modems (on the black side) employ TCP performance enhancing proxy (PEP) which has been shown to work well, the HAIPE encryption of TCP headers renders the onboard modem's PEP ineffective. This is attributed to the fact that under the bandwidth-on-demand environment, PEP must use traditional TCP mechanisms such as slow start to probe for the available bandwidth of the link (which eliminates the usefulness of the PEP). Most implementations recommend disabling the PEP when a HAIPE device is used. In this paper, we propose a novel solution, namely broadband HAIPE-embeddable satellite communications terminal (BHeST), which utilizes dynamic network performance enhancement algorithms for high latency bandwidth-on-demand satellite links protected by HAIPE. By moving the PEP into the red network and exploiting the explicit congestion notification bypass mechanism allowed by the latest HAIPE standard, we have been able to regain PEP's desired network enhancement that was lost due to HAIPE encryption (even though the idea of deploying PEP at the modem side is not new). Our BHeST solution employs direct video broadcast-return channel service (DVB-RCS), an open standard as a means of providing bandwidth-on-demand satellite links. Another issue we address is the estimation of current satellite bandwidth allocated to a remote terminal which is not available in DVBRCS. Simulation results show that the improvement of our solution over FIX PEP is significant and could reach up to 100%. The improvement over the original TCP is even more (up to 500% for certain configurations).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1281-1288
• /
• 2012

This paper presents the design and implementation of a multi-mode mobile broadcasting Emergency Warning System (EWS) transmission and reception system which enables the propagation of disaster information using the encoding and transmission, reception and decoding methods specified in diverse mobile broadcasting standards. The implemented system supports global mobile broadcasting standards such as Terrestrial Digital Multimedia Broadcasting (T-DMB), Digital Video Broadcasting-Handheld (DVB-H), Integrated Services Digital Broadcasting-Terrestrial (ISDB-T), and the Digital Radio Mondiale (DRM) digital radio standard. The system consists of two key part: an encoding/transmission part and a reception/decoding part. The multi-mode mobile broadcasting EWS encoding and transmission system generates EWS data according to each broadcasting specification. The generated EWS data is then transmitted through a channel interface which meets the commercial broadcasting equipment specification. The receiver system receives and decodes the EWS data on a single hardware platform and can display the results on screen. Verification and conformity testing has been carried out on the implemented system by transmitting emergency data for each mode in real-time and displaying the received information in text on the receiver display.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.552-557
• /
• 2017

Wire, wireless digital broadcasting has sharply expanded with the birth of high definition TV since 2010, the use of duplex contents as well as simplex contents has rapidly increased. Currently, our satellite communications system adopted DVB by European digital broadcasting standardization organization as a standard of domestic data broadcasting, the method how to use selective contents has been studied variously according to the development of IPTV. Digital broadcasting utilizes the method using Transport Stream Packet(TSP) by the way of multiplexing of information in order to send multimedia information such as video, audio and data of MPEG-2, this streams include detail information on TV guide and program as well as video and audio information. In order to understand these data broadcasting system, this study realized TS analyzer that divides transport stream (TS) by packet in Linux environment, analyzes and prints by function, it can help the understanding of TS, the enhancement of stream parsing ability.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.607-610
• /
• 2006

The Digital Frequency Synthesizer(DFS) that generates the wideband signal with hish speed frequency hopping rate and high frequency resolution characteristics was implemented in this paper. The DFS was applied as local oscillator for direct frequency conversion IF modules of DVB-RCS, which directly generates the transmission immediate frequency signal by using DDS and wideband PLL technologies. The DDS technology provides high speed frequency hopping rate and high frequency resolution characteristics, which ate also the DVB-RCS requirement. The wideband PLL technology also provides the wideband signal generation, which is a necessity for direct frequency conversion modules. The implemented DFS provide the spurious suppression characteristic of -50 dBc, frequency resolution of 0.233 Hz and frequency hopping rate of 125 ns, respectively. Also the DFS represent the amplitude flatness of 3 dB and less in the pass-band and phase noise characteristic of -75 dBc/Hz at 1 kHz frequency offset.

• Applied Chemistry for Engineering
• /
• v.19 no.3
• /
• pp.304-309
• /
• 2008

Cryptand series ion exchange resins were synthesized with 1-aza-12-crown-4 macrocyclic ligand attached to styrene (4 series dangerous matter) divinylbenzene (DVB) copolymer with crosslink of 1％, 2％, 4％ and 8％ by a substitution reaction. The synthesis of these resins was confirmed by content of chlorine, element analysis, electron micrograph, and IR-spectrum. The effects of pH, time, dielectric constant of solvent and crosslink on adsorption of uranium (${UO_2}^{2+}$) ion were investigated. The uranium ion showed a fast adsorption on the resins above pH 3. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in ethanol was in increasing order uranium (${UO_2}^{2+}$) > nickel ($Ni^{2+}$) > gadolinium ($Gd^{3+}$) ion. The adsorption was in order of 1％, 2％, 4％, and 8％ crosslinked resin and adsorption of resin decreased in proportion to order of dielectric constant of solvents.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.393-396
• /
• 2009

This paper describes a design of variable-length FFT/IFFT processor for OFDM-based communication systems. The designed FFT/IFFT processor adopts the in-place single-memory architecture, and uses a hybrid structure of radix-4 and radix-2 DIF algorithms to accommodate FFT lengths of $N=64{\times}2^k$ ($0{\leq}k{\leq}7$). To achieve both memory size reduction and the improved SQNR, a two-step conditional scaling technique is devised, which conditionally scales the intermediate results of each computational stage. The performance analysis results show that the average SQNR's of 64~8,192-point FFT's are over 60-dB. The processor synthesized with a $0.35-{\mu}m$ CMOS cell library can operate with 75-MHz@3.3-V clock, and 64-point and 8,192-point FFT's can be computed in $2.55-{\mu}s$ and $762.7-{\mu}s$, respectively, thus it satisfies the specifications of wireless LAN, DMB, and DVB systems.

• Convergence Security Journal
• /
• v.21 no.3
• /
• pp.67-73
• /
• 2021

According to a survey by the Korea Tourism Organization in 2018 and 2019, traveling to places recorded in TV programs or influential videos has become an important travel trend and several studies show that watching a travel program improves the intention to visit the places featured on the program. This study designed a travel program-linked data service that provides additional information on the places and events to the viewers of the travel program. Specifically, the additional information of the travel program was defined in a formal manner by dividing it into places and events, and a method of exposure of the additional information conformed to the contents of the program was designed. We also devised an international standard DVB-based data transmission method that provides the additional information to data services appropriately in time for program broadcasting. This study is significant in that it tested new applications of data services for travel programs.

• Phonetics and Speech Sciences
• /
• v.10 no.4
• /
• pp.147-154
• /
• 2018

Wet voice quality (WVQ) is a characteristic that appears after swallowing. Although the concept is accepted by many clinicians worldwide, it is nevertheless ambiguous. In this study, we investigated WVQ in patients with swallowing disorders using acoustic analysis. A total of 106 patients diagnosed with penetration-aspiration by the videofluoroscopic swallowing study (VFSS) were recruited. A voice recording of vowel /a/ was conducted before and after the VFSS, and an acoustic analysis was then performed using PRAAT. Voice after VFSS was used for a perceptual judgment and divided into two groups: the Wet group (48 patients) and the Non-wet group (58 patients). At the post-VFSS stage, the two groups displayed significant differences in many acoustic parameters including F0_SD, Jitter, RAP, Shimmer, APQ, HNR, NHR, FUF, DVB, and CPP. The parameter affecting judging wetness resulted into Jitter and NHR by the logistic regression test. At the pre-VFSS stage, the two groups differed significantly in many acoustic parameters including Intensity, Jitter, RAP, Shimmer, NHR, FUF, DVB, and CPP. Both pre-and post-VFSS, the mean values of all significant parameters, except Intensity, HNR, and CPP, were higher in the Wet group. According to pre-and post-VFSS, the two groups displayed interactions in many parameters (Intensity, F0_SD, Jitter, RAP, Shimmer, APQ, HNR, NHR, FUF, DVB, and CPP). In particular, Intensity increased in both groups after the VFSS, although the increase in the Non-wet group was greater. Based on these results, it was conjectured that the WVQ after swallowing resulted from the secretion effect of the mucous membrane due to the dry laryngeal characteristic of elderly patients, rather than aspiration resulting in food on the vocal cords.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.1
• /
• pp.27-35
• /
• 2014

The headspace solid-phase microextraction (HS-SPME) followed by gas chromatography/mass spectrometry procedure has been developed for the simultaneous determination of petroleum aromatic hydrocarbons such as benzene, toluene, ethylbenzene and xylene isomers (BTEX) and polycyclic aromatic hydrocarbons (PAHs) in seawater. The advantages of SPME compared to traditional methods of sample preparation are ease of operation, reuse of fiber, portable system, minimal contamination and loss of the sample during transport and storage. SPME fiber, extraction time, temperature, stirring speed, and GC desorption time were key extraction parameters considered in this study. Among three kinds of SPME fibers, i.e., PDMS ($100{\mu}m$), CAR/PDMS ($75{\mu}m$), and PDMS/DVB ($65{\mu}m$), a $65{\mu}m$ PDMS/DVB fiber showed the most optimal extraction efficiencies covering molecular weight ranging from 78 to 202. Other extraction parameters were set up using $65{\mu}m$ PDMS/DVB. The final optimized extraction conditions were extraction time (60 min), extraction temperature (50), stirring speed (750 rpm) and GC desorption time (3 min). When applied to artificially contaminated seawater like water accommodated fraction, our optimized HS-SPME-GC/MS showed comparable performances with other conventional method. The proposed protocol can be an attractive alternative to analysis of BTEX and PAHs in seawater.