• Journal of the Korean Society of Safety
• /
• v.8 no.4
• /
• pp.95-100
• /
• 1993

In power transistor switching circuit have shunt snubber(dv/dt limiting capacitor) and series snubber (di/dt limiting inductor). The shunt snubber is used to reduce the turn-off switching loss and the series snubber is used to reduce the turn-on switching loss. Design procedures are derived for selecting the capacitance, inductor and resistance to limit the peak voltage and current values. The action of snubber is analyzed and applied to the design for safety PWM inverter.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10a
• /
• pp.337-339
• /
• 2003

본 논문은 내장형 시스템의 전력 감소를 위해 사용되는 과거 사용량 기반의 DVS의 단점 인 응용 프로그램의 수행 성능 저하를 보상하기 위해, 운영체제의 스케줄러에서 제공하는 태스크의 미래정보를 이용하는 기법을 제안한다. 대표적 내장형 운영체제인 WinCE.net에서의 스케줄러는 제한된 자원의 효율적 관리를 위하여 동일 응용프로그램의 태스크들을 관리하면서 다음 태스크 시행시간 정보를 갖게 된다. 이러한 룩 어헤드(look ahead)정보와 과거사용량기법을 혼합한 혼합예측기법이 실제 내장형 시스템에서 전력소비를 감소시키며 응용프로그램의 수행 성능보상을 할 수 있음을 보인다.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2028-2030
• /
• 2005

The electrical conductivity of manganese oxide and complex manganese oxide produced by anodic deposition method was measured. The additive transition metal is Cu, Co and Fe. The transition metals like as Cu, Co and Fe improved electrical conductivity of complex manganese oxide compared with manganese oxide. This is coincide with the results of molecular orbital calculation by DV-Xa.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10a
• /
• pp.541-543
• /
• 2004

배터리의 용량이 제한적인 핸드헬드 시스템에서의 주요 전력소비원인 프로세서의 전력소비를 절감시키기 위한 동적전압변경 기법에 관련한 많은 연구가 이루어지고 있으나, 프로세서에 집중된 DVS는 MPEG클립 재생과 같은 멀티미디어 응용프로그램에 있어서 빈번히 발생하는 프로세서와 주 메모리간의 상호작용은 충분히 설명하지 못하고 있다. 본 연구에서는 주 메모리와 프로세서간의 상호작용을 반영한 동적 전압변경을 제시하고 실제 시스템에서의 구현 결과를 제시함으로써 메모리인지 동적전압변경 기법이 멀티미디어 응용에 있어서 고전적 DVS방법보다 QoS를 유지하면서 부가적인 전력 절감을 할 수 있음을 보인다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.11B no.3
• /
• pp.112-118
• /
• 2001

In the near future, the voltage of power system for passenger vehicle will be changed to 42V from existing 14V./ Because of increasing power and voltage ratings used in the vehicle the motor drive system has high switching dv/dt and it generates electromagnetic interference (EMI) To solve these problems multi-level inverter system may be used The feature of multi-level inverter is the output voltage to be synthesized from several levels of voltage Because of this feature high switching dv/dt and EMI can be reduced in the multi-level inverter system But as the number of level is increased manufacturing cost is getting expensive and system size is getting large. Because of these disadvantages the application of multi-level inverter has been restricted only to high power drives. The method to reduce manufacturing cost and system size is to integrate circuit of multi-level inverter into a few chips But isolated power supply and signal isolation circuit using transformer or opto-coupler for drive circuit are obstacles to implement the integrated circuit (IC) In this paper a drive circuit of 4-level inverter suitable for integration to hybrid or one chip is proposed In the proposed drive circuit DC link voltage is used directly as the power source of each gate drive circuit NPN transistors and PNP transistors are used to isolate to transfer the control signals. So the proposed drive circuit needs no transformers and opto-couplers for electrical isolation of drive circuit and is constructed only using components to be implemented on a silicon wafer With th e proposed drive circuit 4- level inverter system will be possible to be implemented through integrated circuit technology Using the proposed drive circuit 4- level inverter system is constructed and the validity and characteristics of the proposed drive circuit are proved through the experiments.

• Korean Journal of Materials Research
• /
• v.12 no.11
• /
• pp.860-864
• /
• 2002

$Li^{+}$ extraction reactions with ion-exchange type lithium manganese oxide in an aqueous phase were examined using chemical and x-ray diffraction (XRD) analysis. In the process of extraction reaction, the lithium manganese oxide showed a topotactic extraction of $Li^{+ }$ in the aqueous phase mainly through an ion-exchange mechanism, and the $Li^{+}$ extracted samples indicated a high selectivity and a large capacity for $Li^{+}$ . The electronic structures and chemical bonding properties were also studied using a discrete variational (DV)-X$\alpha$ molecular orbital method with cluster model of (Li$Mn_{12}$ $O_{40}$ )$^{27-}$ for tetrahedral sites and ($Li_{7}$ Mn $O_{38}$ )$^{3}$ for octahedral site in $Li_{1.33}$ $Mn_{1.67}$ / $O_{4}$ respectively. Li in the manganese oxides is highly ionized in both sites, but the net charge of Li was greater for tetrahedral sites than octahedral. These calculations suggest that the tetrahedral sites have higher $Li^{+}$ $H^{+}$ exchangeability than the octahedral sites, and are preferable for the selective adsorption for L $i^{+}$ ions.s.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.11a
• /
• pp.1-1
• /
• 1994

;The electronic state calculations for various types of ceramic materials have beell performed by the use of $DV-X\;{\alpha}$ cluster method. The molecular orbital levels and wave functions for model clusters have been computed to study the electronic properties ami chemical bonding of the ceramics. For ${\beta}-sialon(Si_{6-z}Al_zO_zN_{8-z})$ which is a high temperature structural material based on ${\beta}-Si_3N_4$, we have made model cluster calculations to estimate the strength of chemical bonding between atoms by the Mulliken population analysis. It is found that the covalent bonding between Si and N atoms is very strong in pure ${\beta}-Si_3N_4$, but the covalency around solute atom is considerably weakened when Si atom is substituted by AI. This tendency is enhanced by an additional substitution of oxygen atom for N. The result calculated can well explain the experimental data of changes in mechanical properties such as the reductions of Young's modulus and Vickers hardness with increment of z-value in ${\beta}-sialon$. Various model clusters for transition metal oxides which show many interesting physical and chemical properties have also been calculated. High-valent perovskite-type iron oxides EMFe0_3E(M=Ca and Sr) possess very interesting magnetic and chemical properties. In these oxides, iron exists as $Fe^{4+}$ state, but the experimental measurement of Mossba~er effect suggests that disproportionation $2Fe^{4+}=Fe^{3+}+Fe^{5+}$ takes place for $CaFe0_3$ at low temperatures. The model cluster calculations for these compounds indicated the existence of considerably strong covalent bonding of Fe-O. The calculations of hyperfine interaction at iron neucleus show very good agreement with the experimental Mossbauer measurements. The result calculated also implies that the disproportionation reaction is strongly possible by assuming the quenching of breathing phonon mode at low temperatures.tures.

• The Korean Journal of Pain
• /
• v.27 no.4
• /
• pp.334-338
• /
• 2014

Background: Lumbar transforaminal epidural steroid injections (TFESIs) are performed to provide symptom relief in patients with radicular pain. Recent articles suggested that injected volume itself have analgesic effects and higher volumes are associated with better outcomes. To date, few studies have been conducted to investigate the effects of volume. Therefore, well-designed controlled studies were necessary to confirm the effect of volume itself on pain relief. The purpose of this study was to examine the effectiveness of a forceful saline injection on lumbar TFESI using non-particulate steroids. Methods: Fifty consecutive patients with lumbar radicular pain were enrolled. The participants were allocated into one of two groups: dexamethasone with volume (Group DV) and dexamethasone alone (Group DO). The volume was delivered by a forceful injection of 5ml of normal saline. The primary end-point for this study was a VAS pain score and modified MacNab score indicating the rate of effectiveness at the four-week follow-up. Results: There were no significant post-procedural VAS differences between two groups (P = .252). The effectiveness rate among the patients was 47.8% in DV group, 34.8% in DO group, measured by modified MacNab score. The difference was not statistically significant (P = .117). Conclusions: A forceful saline injection did not have a significant effect during the treatment of radicular pain. Further studies with greater volumes and with additional techniques would offer a more conclusive perspective.

• New & Renewable Energy
• /
• v.1 no.3 s.3
• /
• pp.42-50
• /
• 2005

This paper deals with the economic feasibility model and analysis of a hydrogen fuel-cell vehicle [FCV] against two similar types of non-business vehicles fueled with gasoline [GV] and diesel [DV] considering greenhouse gas [GHG]. Considering the price of vehicles and annual operating cost, we build a classical economic feasibility model. Since the economic feasibility could be affected by many input factors such as the prices of vehicles, the price of fuels, annual driving distance and so on, we estimate the average future values of input factors, which is defined as "the average case". Based on the average case, we assess the representative economic feasibility of a FCV with/without GHG, and by changing various annual driving distances, we assess its economy in terms of net-present value, internal rate of return, and payback period. In addition, we make some sensitivity analysis of its economic feasibility by changing the values of the critical input factors one at time. Based on the average case, it turns out that the consumer of a FCV could save 25,000 won/year for a GV, but the consumer could pay 120,000 won/year more for a DV. This indicates that gasoline vehicles could be replaced gradually by FCVs in Korean market which might be formed by those consumers driving annually more than approximately 14,800 km. As the results of our sensitivity analysis, it turns out that a FCV is no more economical if the difference of the prices between FCV and GV is more than 10,130,000 won or the price of hydrogen fuel could be more than 5,136 won/kg.

• Journal of Food Hygiene and Safety
• /
• v.16 no.1
• /
• pp.82-87
• /
• 2001

A study was performed to establish detection methods by viscometric and pulsed photostimulated luminescence (PPSL) methods for irradiated com powder. Viscosity was determined using a Brookfield DV-rotation viscometer at 3$0^{\circ}C$ and operated at 30, 60, 90, 120, 150, 180, and 210 rpm. All irradiated samples showed a decrease in Viscosity with increasing stirring speeds (rpm) and irradiation doses. Treatments at 1~3 kGy significantly decreased the viscosity. The photon counts of irradiated corn powder were measured by PPSL immediately after irradiation and exhibited an increase with increasing irradiation dose. The photon counts of irradiated com powder almost disappeared with lapse of time in room conditions, but detection of irradiation was still possible after one month at darkroom conditions. Consequently, these results suggest that the detection of irradiated com powder is possible by both viscometric and PPSL methods.