• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.401-409
• /
• 2018

This paper presents means of reducing noise in NSD using path control methods for Light Tactical Vehicles (LTV). NSD is applied to the rear axle of LTVs for enhancing mobility. NSD can improve mobility of vehicles with a high locking ratio but causes noise under certain conditions due to its mechanical structure. This noise results from contact between gears due to the differential role of NSD. The noise affects users, so users have continually requested noise reductions. Though the noise doesn't affect product performance and durability, and satisfies the National Defense's noise condition standards, users request for noise reduction is the focus of this research. Eliminating the source of sound for LTVs is realistically limited, so this research applies a path control method to reduce noise by controlling the path which transmits the noise. This study improves the structural delivery system and examines methods of reducing noise in LTV systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.117-124
• /
• 2019

Military Vehicles of the Korean army had been developed before 2004 and used manual transmissions. Manual transmissions contain a clutch system regulating the force from engine to transmission. In this study, a 2.5-ton military vehicle's clutch system was investigated. The existing clutch system had the characteristics that need to adjust the clearance between the clutch cover and release bearing. Improper clearance led to early wear of the clutch disk and failure of the clutch cover. To solve these problems, an improved clutch system was suggested and tested. The improved clutch system contains auto adjustment of the clearance and an enhanced clutch disk. To verify the improved clutch systems, 2 stage tests were conducted: an accelerated life test of the clutch system, and a driving test by trainee of driving more than 3,000km. As a result, the problems caused by the improper clearance adjustment were solved and this design was verified.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.74-80
• /
• 2021

This study investigated the process quality level of a K5 gas mask, which recently acquired its operational capability, through statistical process analysis for the mass production stages and their lots. The tensile adhesion strength was the only operating requirement in the manufacturing process of the K5 gas mask. For this purpose, the results of tensile adhesion strength between the lens and facial rubber during the initial and second mass production stages were analyzed using conventional statistical and statistical process analysis methods. The conventional statistical results indicated that the second mass production stage was better than the initial mass production stage. In cases of a control chart and process capability of tensile adhesion strength, the process quality level was also improved by following the mass production stages. The improvement was caused by process stabilization and work skill elevation. These results and methods are expected to be conducted and utilized in the third mass production stage. Moreover, quality improvement of K5 gas mask mass production can be achieved using the Lean 6 sigma procedure, MDAIC (Define, Measure, Analyze, Improve, Control).

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.2
• /
• pp.1-6
• /
• 2015

Transmission of a tracked vehicle designed for multiple functions such as steering, gear-shifting, and braking is a core component of heavy vehicle to which the power is transferred based on combined technology of various gears, bearing, and fluid machineries. Robustness and durability of transmission, however, have been issued due to a large number of driving units and sub-components inside its body. The bevel gears are major components for the transmission of power in a transmission. Increasing the tooth surface roughness and chamfering of the bevel gears, especially, we aim to improve the quality of transmission. In this study, design structural evaluation is conducted on bevel gears of transmission for tracked vehicle using the ROMAX-DESIGNER program. By doing so, design safety of the bevel gears has been evaluated based on the gear strength theory of ANSI/AGMA 2003 B97 standard.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.3
• /
• pp.231-240
• /
• 2012

During the past two decades, Metal Injection Molding(MIM) has become a very competitive technology to fabricate small, precise and complex-shaped parts in large quantities. In this research, the applicability of MIM technology in the mass-production of the high precision fuze parts to save manufacturing cost was investigated. The water-atomized 17-4PH stainless steel powder, one of the best corrosion-resistant high strength materials, was injection-molded into real-shape fuze part and flat tensile specimens. The injection-molded parts were thermally debound in hydrogen gas flow without solvent extraction. Sintering of the debound parts was carried out in vacuum at temperatures ranging from $1150^{\circ}C$ to $1370^{\circ}C$. The sintering behavior, mechanical properties, dimensional precision, corrosion resistance of the MIMed 17-4PH stainless parts were investigated. It was found that almost all the properties of the MIMed parts were comparable to those of the mechanically machined parts. Also, actual military field tests using both MIMed and mechanically machined fuze parts were performed as well and were found to be very successful.

• Journal of Korean Society for Quality Management
• /
• v.40 no.3
• /
• pp.286-294
• /
• 2012

Purpose: In this study, we propose the ESS process model which, in order to improve reliability of electronic equipment, can be referenced in both development and production phases. Methods: ESS guidelines such as MIL handbooks or private sector ESS guidelines are used for devising the proposed ESS model. Especially, proposed model is customized by using those references in order to be optimized in the domestic development and production phases. Results: ESS-related-requirements which is specified in the Technical Data Package(TDP) for the area of guided missile systems are analyzed. Current status of the requirement and screening strength are analyzed for those systems to show what kind of weak points should be improved. Conclusion: A ESS guideline which is applicable to the domestic weapon acquisition environment is proposed. As such, the necessity and detail guidelines of the proposed model are explained.

• Journal of Korean Society for Quality Management
• /
• v.44 no.3
• /
• pp.527-540
• /
• 2016

Purpose: The purpose of this study was to propose contrast metric which is based on the human visual perception and thus it can be used to improve the quality of digital images in many applications. Methods: Previous literatures are surveyed, and then the proposed method is modeled based on Human Visual System(HVS) such as multiscale property of the contrast sensitivity function (CSF), contrast constancy property (suprathreshold), color channel property. Furthermore, experiments using digital images are shown to prove the effectiveness of the method. Results: The results of this study are as follows; regarding the proposed contrast measure of complex images, it was found by experiments that HVS follows relatively well compared to the previous contrast measurement. Conclusion: This study shows the effectiveness on how to measure the contrast of complex images which follows human perception better than other methods.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.349-352
• /
• 2010

인터넷의 등장은 세계를 초단위 정보 소통 영역으로 묶어 정보가 사회를 주도하는 형태로 발전시켰듯이, 미래 전쟁 양상도 정보가 전쟁의 승패를 결정하는 네트워크중심전(NCW)으로 발전되고 있으며, NCW의 핵심은 무기체계간 상호운용성이다. 무기체계간 상호운용성을 확보하기 위해서는 표준화된 정보를 활용해서 연동하는 중요하며, 우리 군은 무기체계간 연동을 위해 연동메시지인 KMTF를 활용하고 있다. 그러나 현 KMTF 표준은 메시지구조(message frame)만을 제시하고 세부적인 메시지는 정의하지 않아 각 체계 개발자가 나름대로 메시지를 정의함으로써 중복된 메시지를 각 체계별로 관리하고 있고, 동일한 메시지를 다른 방식으로 적용하는 부작용이 발생할 수 있으며, 체계간 연동을 위해 별도의 변환기를 개발해야 하는 문제점이 발생하고 있다. 이를 위해 본 논문에서는 첫째, 미군 메시지포맷인 USMTF를 벤치마킹하여 무기체계에 공통 적용이 가능한 공통메시지 설계방안을 제시하며, 둘째, 메시지 생명주기 관리 및 메시지 추가등록 절차 관리를 위한 KMTF 표준 관리 절차를 제시하고, 셋째, 개정된 메시지 규격에 맞는 KMTF 관리도구 개발의 방향을 제시한다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.432-440
• /
• 2011

Operational Mode Summary/Mission Profile(OMS/MP) is a document to quantify the operational and maintenance requirements based on the future operational environments and its mission and How to Fight concept in the development of the weapon system. It is important as a key document for the RAM goal setting in the early phase of weapon system development. The paper presents a systematic and practical submarine OMS/MP model processes with a deep analysis of relevant case studies and current status domestic and abroad. Especially, it proposes the unique Scenario Planning and Switch on List techniques with real case studies which have recently performed. The paper will contribute not only the basis of improved requirements for the development of weapon system but also the sustainment of readiness with the enhancement of RAM and reduction of total life cycle cost.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.414-422
• /
• 2011

In this paper, we analyze the standards of the bolts for maintaining the products. The maintainer don't know the detail information of bolts by seeing the shape of bolts when they repair the products. So they waste much time and cost. To solve the these problem, we propose the new systematical discrimination of bolts. To propose the discrimination code, we divide the shapes of the bolts into four classes(head, internal drive, shank and end). User can fine preferentially similar standards by just the shapes of bolts under the this discrimination code. And, User can find the standards of bolts that they want by using the additional information such as measurements. We will reduce the cost and time for the maintaining the products by using the proposed discrimination code.