• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.86-95
• /
• 2006

Brillouin backscatter is a type of reflection that occurs when light is shone into an optical fibre. Brillouin reflections are very sensitive to changes in the fibre arising from external effects, such as temperature, strain and pressure. We report here several case studies on the measurement of strain using Brillouin reflections. A mechanical bending test of an I beam, deployed with both fiber optic sensors and conventional strain gauge rosettes, was performed with the aim of evaluating: (1) the capability and technical limit of the DTSS technology for strain profile sensing; (2) the reliability of strain measurement using fiber optic sensor. The average values of strains obtained from both DTSS and strain gauges (corresponding to the deflection of I beam) showed a linear relationship and an excellent one-to-one match. A practical application of DTSS technology as an early warning system for land sliding or subsidence was examined through a field test at a hillside. Extremely strong, lightweight, rugged, survivable tight-buffered cables, designed for optimal strain transfer to the fibre, were used and clamped on the subsurface at a depth of about 50cm. It was proved that DTSS measurements could detect the exact position and the progress of strain changes induced by land sliding and subsidence. We also carried out the first ever distributed dynamic strain measurement (10Hz) on the Korean Train eXpress(KTX) railway track in Daejeon, Korea. The aim was to analyse the integrity of a section of track that had recently been repaired. The Sensornet DTSS was used to monitor this 85m section of track while a KTX train passed over. In the repaired section the strain increases to levels of 90 microstrain, whereas in the section of regular track the strain is in the region of 30-50 microstrain. The results were excellent since they demonstrate that the DTSS is able to measure small, dynamic changes in strain in rails during normal operating conditions. The current 10km range of the DTSS creates a potential to monitor the integrity of large lengths of track, and especially higher risk sections such as bridges, repaired track and areas at risk of subsidence.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권4호
• /
• pp.446-459
• /
• 2017

Naval ships are assigned many and varied missions. Their performance is critical for mission success, and depends on the specifications of the components. This is why performance analyses of naval ships are required at the initial design stage. Since the design and construction of naval ships take a very long time and incurs a huge cost, Modeling and Simulation (M & S) is an effective method for performance analyses. Thus in this study, a simulation core is proposed to analyze the performance of naval ships considering their specifications. This simulation core can perform the engineering level of simulations, considering the mathematical models for naval ships, such as maneuvering equations and passive sonar equations. Also, the simulation models of the simulation core follow Discrete EVent system Specification (DEVS) and Discrete Time System Specification (DTSS) formalisms, so that simulations can progress over discrete events and discrete times. In addition, applying DEVS and DTSS formalisms makes the structure of simulation models flexible and reusable. To verify the applicability of this simulation core, such a simulation core was applied to simulations for the performance analyses of a submarine in an Anti-SUrface Warfare (ASUW) mission. These simulations were composed of two scenarios. The first scenario of submarine diving carried out maneuvering performance analysis by analyzing the pitch angle variation and depth variation of the submarine over time. The second scenario of submarine detection carried out detection performance analysis by analyzing how well the sonar of the submarine resolves adjacent targets. The results of these simulations ensure that the simulation core of this study could be applied to the performance analyses of naval ships considering their specifications.

• 상하수도학회지
• /
• 제23권3호
• /
• pp.363-369
• /
• 2009

In order to evaluate primary clarifier performance on TSS(Total Suspended solids) removal, four different sampling sets were collected as part of this study; (1) weekly test, (2) the diurnal sampling, (3) the settling velocity distribution sampling. Primary effluent TSS($TSS_{PE}$) and non settleable TSS($TSS_{NON}$) concentrations were averaged 160 and 75.5 mg/L, respectively. These data suggest approximately 85 mg/L TSS can be removed more. Average $TSS_{NON}$, $TSS_{PE}$, and Dispersed TSS(DTSS) concentrations(75.5, 160, and 104 mg/L, respectively) suggest that 28.5 mg/L of TSS difference attributable to poor flocculation, whereas 56 mg/L of TSS difference attributable to poor hydraulics within primary clarifier. In this study, equations for maximum TSS removal efficiency and effluent TSS concentration were suggested and compared with experimented data.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.275-276
• /
• 2006

선박 및 해양기자재의 안전 진단을 위한 기존의 기술은 접 센서(point sensor)를 이용한 변형률 측정 기술이 대부분이라 할 수 있다. 본 논문은 기존의 기술보다 효율적으로 응용될 수 있는 광섬유 센서를 이용한 분포 개념의 온도 및 변형률 측정(DTSS: Distributed Temperature & Strain Sensing) 기술에 대해 소개하고 있다. 이 기술은 선체 응력 모니터링, 해양 구조물 안전진단, subsea flowline 모니터링, platform의 riser 안정성, umbilical 모니터링 등에 활용될 수 있다.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2003년도 추계학술대회 및 정기총회
• /
• pp.87-93
• /
• 2003

This paper reviews existing message-filtering schemes and presents a quantization-based message-filtering approach which reduces state update transmission and message traffic requirement. For a realization of the approach we develop a DEVS-based integrator which provides behavior and characteristic of the quantization-based approach. We take a spaceship and space traveling system as a case study to evaluate performance of the quantization-based approach. The approach is validated by DEVSJAVA simulations of the case study. The comparison of message traffic requirement between DTSS (Discrete Time System Specification)-based and DEVS-based systems apparently shows system performance improvement through the quantization-based approach.

• 방사성폐기물학회지
• /
• 제8권4호
• /
• pp.293-301
• /
• 2010

한국원자력연구원 내에 위치하는 방사성폐기물지하처분연구시설의 터널 내 벽면의 지반변위 및 온도 변화를 실시간으로 감시할 수 있는 시스템을 구축하였다. 이 시스템은 광섬유케이블(Optical Fiber Cable)의 Brillouin 산란현상을 이용하는 분포개념의 온도 및 변형율 측정기법(Distributed Temperature and Strain Sensor: DTSS)을 적용하는 기술이다. 2년여 동안 감시한 결과 터널 벽면 쇼크리트 표면에서 균열 등과 관련한 뚜렷한 벽면 변위 징후는 발견되지 않았다. 다만, 시간이 경과함에 따라 터널 내에서 지하수 누출 지점을 중심으로 벽면에서 변형의 누적 크기가 증대되어가는 경향을 보이나 그 크기는 미약하고 완만하게 진행함을 확인하였다. 계속적인 지하수에 의한 포화-습윤-건조 등의 현상이 반복되는 구간이나 포화상태에 있는 구간은 점진적으로 영향이 커질 것으로 예상된다. 광섬유센서케이블을 이용한 분포 개념의 측정 및 분석기술은 구조물의 특성에 따라 선택적 탄력적 적용이 가능하다. 변형률의 계측 범위는 $20{\mu}{\varepsilon}{\sim}28,000{\mu}{\varepsilon}$ 크기까지 변위 계측이 가능하다. 변형률의 해상도는 0.01mm로서 최소 매 1m 간격, 온도는 $0.01^{\circ}C$ 해상도를 가지고 최소 0.5m 간격으로 감시가 가능하다. 기존의 특정지점 계측방법(Point Sensing)과는 확연하게 차별된다. 현재까지 운영한 결과 본 감시시스템은 방사성폐기물 처분시설 등 공동과 사면의 장기감시시스템으로 적용 가능성을 확인하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.395-399
• /
• 2007

Renewable energy sources such as wind energy is copiously available without any limitation. Wind turbines are used to tap the potential of wind energy which is available in millions of megawatt. Reliability of wind turbine is critical to extract this maximum amount of energy from the wind. We reviewed different techniques, methodologies, and algorithms developed to monitor the performance of wind turbine as well as for an early fault detection to keep away the wind turbines from catastrophic conditions due to sudden breakdowns. To keep the wind turbine in operation, implementation of Condition Monitoring System (CMS) is paramount, and for this purpose ample knowledge of these types of system is mandatory. So, an attempt has been made in this direction to review maximum approaches related to CMS in this piece of writing.

• Ocean Systems Engineering
• /
• 제7권3호
• /
• pp.247-273
• /
• 2017

Many different engagement situations require naval ships to achieve some level of effectiveness. The performance of the naval ships is very important for such effectiveness. There have been many studies that analyze the effectiveness and the performance. The former are largely related to engagement level simulations, while the latter are largely related to engineering level simulations. However, there have been few studies that consider both the engagement level and the engineering level at the same time. Therefore, this study presents three case studies using engagement simulation of the engineering level to check the performance of the related parameters. First, detection performance simulations are carried out by changing the specifications of the passive sonars of a submarine in different scenarios. Maneuvering performance simulations are carried out by changing the specification of the hydroplanes of a submarine in different scenarios. Lastly, in order to check whether or not our forces would succeed in attacking enemy forces, we perform an engagement simulation with various naval ship models that consist of several engineering level models, such as command systems, weapon systems, detection systems, and maneuver systems. As a result, the performance according to the specifications of the naval ships and weapons is evaluated.

• 대한조선학회논문집
• /
• 제46권3호
• /
• pp.303-312
• /
• 2009

Recently, requests for the accurate process planning using modeling and simulation technique are increasing in many engineering fields including shipbuilding industry. In this study, Combined DEVS(Discrete EVent System specification) and DTSS(Discrete Time System Specification) simulation kernel is developed, and an integration strategy of dynamics simulation module and graphics module is also implemented. To evaluate the efficiency and applicability of the simulation kernel and integration strategy, these are applied to the block erection simulation of offshore structures.

• 대한조선학회논문집
• /
• 제45권6호
• /
• pp.656-668
• /
• 2008

When it comes to design and acquire underwater vehicles such as a submarine and a torpedo according to the process of SBA(Simulation Based Acquisition)/SBD(Simulation Based Design), it is necessary to predict the performance of interest precisely and to perform the test over and over again using the M&S(Modeling and Simulation) of the engineering and the engagement level. In this paper, we research the DEVS(Discrete Event System Specification) and DTSS(Discrete Time System Specification) formalism based standard model architecture for the underwater vehicle which can support both the heterogeneous level of the M&S(Engineering/Engagement) and the different system of the M&S(Discrete Event System and Discrete Time System). To validate this standard modeling architecture, we apply it to the submarine normal diving simulation.