• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.2
• /
• pp.139-144
• /
• 2014

A Fuel Cell is one of the solving to reduce greenhouse gases. Despite the high efficiency and environmental friendly of Household Fuel Cell System it has hardly obtained popularity mainly due to its high prices. In order to encourage use of the system prices and operational expenses need to become economical. In this study, optimization through simulation was conducted to find out the optimal operational condition. As a result of simulation the system is operated with DSS operation from 5 O'clock until 19 O'clock for 13 hours at the constant output of 0.4kW to maximize reduction of energy rate. Furthermore, instead of the domestic system with the rated output of 1kW, rated output of the system should be reduced to 0.4 - 0.6kW which can promote installation of household Fuel Cell System.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.13 no.21
• /
• pp.7-10
• /
• 1990

In the modern society where information system based on the computer in organization have been developed over again. A decision support system is one of the most popular topics. The computer have been discussed in relation to management strategy between enterprisers and researchers so far, but the accumulation of data resource and communication foundation have not been attended in actuality. The organic connection between business and information technique have been less progressed than our expectation. At this point of time. such a technical restrution getting removed, We have closed a gap between management strategy and computer. Now we are taking a growing interest in computer use for supporting proceedings decision, a lot of strategic marketing decision is wifely used in such a case, and the technical development is comming to advanced. In this study, I Investigate such a new tendency as strategic program and proceedings decision system. I will especially focus my study on a strategic program and a budget control corporation, so to speak, on strategic budget management system. Concretely the purpose of this study is to investigate what functions the proceedings decision support system requires in order to deal with the problem of strategic level and to practically establish the system with the use of DSS GENERATOR/ARISTOTLE in my laboratory.

• Journal of Arbitration Studies
• /
• v.29 no.4
• /
• pp.187-210
• /
• 2019

This article examines the necessity for the introduction of an ICSID Appellate System. In comparison with the WTO appellate system, the ICSID ad hoc Committee has a very limited mandate. An annulment inquiry under the ICSID arbitration system barely focuses on whether the arbitral decision resulted from a justifiable process. As long as there is procedural legitimacy, the resulting awards remain unaffected under the annulment procedure, irrespective of mistakes of fact or law. In contrast, in the WTO DSS the AB substantively reviews panel rulings and suggestions that are founded on any deficiency of objectivity or error in the interpretation of a particular WTO provision. This defect intrinsic in the annulment procedure could cause injustice to a party earnestly interested in correcting recognized misapplication of law by ICSID tribunals. Accordingly, the establishment of an appellate system would result in a more substantive and procedural review of awards. The creation of such an ICSID appellate system would ensure thorough scrutiny of the decisions of the tribunal of first instance, leading to better reasoned outcomes. This could lead to a crystallization of predictability in investment relations. The end result would be that fairness, clarity, reliability, and legality in the ICSID adjudicative process would be unassailable, to the advantage of all the contracting parties.

• Coupled systems mechanics
• /
• v.5 no.4
• /
• pp.341-353
• /
• 2016

Manufactures of multi-crystalline silicon ingots by means of the directional solidification system (DSS) is important to the solar photovoltaic (PV) cell industry. The quality of the ingots, including the grain size and morphology, is highly related to the shape of the crystal-melt interface during the crystal growth process. We performed numerical simulations to analyze the thermo-fluid field and the shape of the crystal-melt interface both for steady conditions and transient processes. The steady simulations are first validated and then applied to improve the hot zone design in the furnace. The numerical results reveal that, an additional guiding plate weakens the strength of vortex and improves the desired profile of the crystal-melt interface. Based on the steady solutions at an early stage, detailed transient processes of crystal growth can be simulated. Accuracy of the results is supported by comparing the evolutions of crystal heights with the experimental measurements. The excellent agreements demonstrate the applicability of the present numerical methods in simulating a practical and complex system of directional solidification system.

• Journal of Korean Clinical Nursing Research
• /
• v.14 no.2
• /
• pp.71-81
• /
• 2008

Purpose: The objective of this study was to determine the cause-effect and dynamic change mechanism among factors that affect calculation of the nursing workforce in the hemodialysis room and to establish a system dynamics model and create a strategic simulation to be used to increase efficiency in the clinical situation. Method: The system dynamics approach was adapted to build a simulation model for calculating the nursing workforce. The model was built using Vensim 5.0b DSS. Results: The results were as follows for Scenario A: The highest level of nursing service quality, patient satisfaction, and nurse satisfaction, and the lowest level of turnover intention is maintained when the ratio of patients to nurse is 3.5:1 compared to all other situations. Scenario B: At the ratio of patients to nurse 4.0:1 nursing service quality, patient satisfaction, and nurse satisfaction dropped slightly, and turnover intention also rose slightly. However with time the results showed improvement. Conclusion: In terms of economic efficiency in the hemodialysis room, the ratio of patients to nurse for the best nursing workforce should not exceed 4.0:1.

• Journal of Korean Port Research
• /
• v.13 no.2
• /
• pp.189-198
• /
• 1999

The purpose of this paper is to develop a knowledge-based real-time decision support system to support decision makers for efficient berth operation of Inchon Port. In these days the berth operation problems have been many studied. The berth operation rules differ from port to port and the problem is highly dependent on natural geographical and operational environment of port. In Inchon Port the ship’s entrance into port and departure from port is extremely affected status of dock. In this paper we analyzed some effects of dock a specific character of Inchon Port with a real data of ship’s in Inchon Port. And reconstruct a previous expert’s knowledge of berth allocating problem in Inchon Port. Also the mechanism for the efficient berth operation has been studied by repeatedly dispatching in order to obtain a best effect of berth allocation, with real-time updated information for delay at service time of a specific berth and changing of a working-berth. The system is developed with graphic user interface(GUI) concept using user interactive approach. And this system will be provide decision support maker with an efficient and fast way to berth allocating and reduce wastes of time space and manpower in Inchon Port operation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.44
• /
• pp.217-227
• /
• 1997

There are six perspectives of fit in strategy research, each implying distinct theoretical meaning and requiring the use of specific analytical schemes. But there is a few literature of the perspective in the discipline of Organizational Decision-Making and DSS. This study is a prior research which objective is to investigate the perspective of fit emprically in the discipline. The data were collected throughout the sampled business firms with premade questionaire and analysis were conducted with correlation analysis, regression, ANOVA and so forth. The research finding is that both predictors, one of which can be the moderator, influence the performance, and that the joint-effect of them influence the performance. Thus,'Fit as Moderation' would be suggested to be a proper model for the research in the discipline of Organizational Decision-Making and Decision Support Systems.

• Asia pacific journal of information systems
• /
• v.7 no.3
• /
• pp.145-165
• /
• 1997

Thie study examines MIS researchers, research themes, methodology, and intellectual structure in order to analyze general research patterns in the field of MIS. The methods used for this study are subject analysis of the journal articles, citation analysis, and author co-citation analysis, The source articles are all the papers in $\lceil$Journal of Korean MIS Society$\rfloor$ and MIS papers in $\lceil$Korean Management Review$\rfloor$ and $\lceil$Journal of Korean MS/OR Society$\rfloor$. In results, core journals in MIS are MIS Quarterly, Management Science, and Communications of ACM. Core authors inlcude Ives, DeSanctis, Ginzberg, Lucas, Rockart, and Davis. The major areas in Korean MIS research turn out to be information system management, DSS/GDSS strategic information systems and AI applications.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.312-315
• /
• 1993

Optimal control theories based on the maximum principles have been evolved and applied to distributed parameter systems(DPSs) represented by partial differential equations (PDEs) and integral equations (IEs). This paper intends to show that an optimal control of a tubular reactor described by a one-dimensional partial differential equation was obtained using the distributed parameter control method for parabolic PDEs. In develping an algorithm which implements the calculation, the method of lines (MOL) was adopted through using a package called the DSS/2. For the tubular reactor system chosen for this paper, the optimal control method based on PDEs with the numerical MOL showed to be more efficient than the one based on IEs.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.256-257
• /
• 2011

The development for Eco-friendly cars has been expanded as the concern about environmental pollution and a rise in gas prices. The Electric Vehicle(EV) and Plug in Hybrid Electric Vehicle(PHEV) are generally connected on distribution power systems to charge the traction batteries. The growing number of EV/PHEVs could have a effect on distribution power systems and result in overload of power utilities and power quality problems. In order to reduce the adverse effect on distribution power systems, the influence of electric vehicle loads should be evaluated. In this paper, the influence of electric vehicle loads is evaluated by using OpenDSS(Open Source Distribution System Simulator) according to the penetration rate of electric vehicle.