• Journal of Industrial Technology
• /
• v.29 no.A
• /
• pp.95-100
• /
• 2009

In this paper, we implemented a speaker-independent speech recognizer using the TMS320F28335 DSP which is optimized for control applications. For this implementation, we used a small-sized commercial DSP module and developed a peripheral board including a codec, signal conditioning circuits and I/O interfaces. The speech signal digitized by the TLV320AIC23 codec is analyzed based on MFCC feature extraction methed and recognized using the continuous-density HMM. Thanks to the internal SRAM and flash memory on the TMS320F28335 DSP, we did not need any external memory devices. The internal flash memory contains ADPCM data for voice response as well as HMM data. Since the TMS320F28335 DSP is optimized for control applications, the recognizer may play a good role in the voice-activated control areas in aspect that it can integrate speech recognition capability and inherent control functions into the single DSP.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.12
• /
• pp.31-39
• /
• 1998

This paper presents the design and implementation of a new multimedia fixed-point DSP (MDSP) core for portable multimedia applications. The MDSP instruction set is designed through the analysis of multimedia algorithms and DSP instruction sets. The MDSP architecture employs parallel processing techniques, such as SIMD and vector processing as well as DSP techniques. The instruction set can handle various data formats and MDSP can perform two MAC operations in parallel. The switching network and packing network can increase the performance by overlapping data rearrangement cycles with computation cycles. We have designed Verilog HDL models and the 0.6 $\mu\textrm{m}$ Samsung KG75000 SOG library is used. The total gate count is 68,831 and the clock frequency is 30 MHz.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.67-70
• /
• 2000

DSP is used for processing the digital data in such as the multimedia applications. Because the digital data of high rate is demanded more and more, high performance is increasingly required in DSP. In this paper, we discuss important issues for development of high performance DSP, analyze architectures of several commercial DSP chips, and propose a new architecture. Finally, we show that the new architecture has the highest performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10C
• /
• pp.983-991
• /
• 2009

While H.264/AVC is in wide use for multimedia applications such as DMB and IPTV service, we have limited usage cases for embedded real-time applications due to its high computational demand. The paper provides judicious guide line for optimization method selection, by presenting the detailed experiments data through the development process of a real time H.264 software encoder on embedded DSP. The experimental analysis includes an intensive profiling analysis, fast algorithm application, optimal memory assignment, and intrinsic-based instruction selection. We have realized a real-time software that encodes CIF resolution videos 15 fps on TMS320DM64x processors.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.82-92
• /
• 2008

Recently, many digital signal processing(DSP) applications such as H.264, CDMA and MP3 are predominant tasks for modern high-performance portable devices. These applications are generally computation-intensive, and therefore, require quite complicated accelerator units to improve performance. Designing such specialized, yet fixed DSP accelerators takes lots of effort. Therefore, DSPs with multiple accelerators often have a very poor time-to-market and an unacceptable area overhead. To avoid such long time-to-market and high-area overhead, dynamically reconfigurable DSP architectures have attracted a lot of attention lately. Dynamically reconfigurable DSPs typically employ a multi-functional DSP accelerator which executes similar, yet different multiple kinds of computations for DSP applications. With this type of dynamically reconfigurable DSP accelerators, the time to market reduces significantly. However, integrating multiple functionalities into a single IP often results in excessive control and area overhead. Therefore, delay and power consumption often turn out to be quite excessive. In this thesis, to reduce power consumption of dynamically reconfigurable IPs, we propose a novel fine-grained clock gating scheme, and to reduce size of dynamically reconfigurable IPs, we propose a compact multiplier-less multiplication unit where shifters and adders carry out constant multiplications.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.406-408
• /
• 2001

In this thesis, a video tracker with a TMS320C31 DSP is designed and implemented. It is intended to work with PC through PCI Bus and can be used in real-time applications. The DSP board is capable of grabbing image data from camera, and calculating the position of a target, and tracking its movement. The tracking situation can be displayed in a PC monitor and displacement of the movement is fed back to pan and tilt the camera. Experimental results show that the tracker implemented here works well in real applications.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.18 no.1
• /
• pp.25-30
• /
• 2023

We propose a method to update DSP (Digital Signal Processor) firmware using USB (Universal Serial Bus) flash drives. The DSP automatically detects USB drives based on an interrupt when the USB drive is inserted into the USB port. The new firmware binary file is found in the mounted USB drive, and the destination address of DSP flash memory is identified for the firmware update writing by investigating the firmware file header. After the new firmware is written to the DSP flash memory, the DSP is reset and rebooted with the newly updated firmware. By employing TI's TMS320F28379D control card with USB ports, we conduct experiments and verify the normal operation of the implemented method.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.9
• /
• pp.55-65
• /
• 2000

In this paper, we propose a hardware reduced multiplier for DSP applications. In many DSP applications, all of multiplier products were not used, but only upper bits of product were used. Kidambi proposed truncated unsigned multiplier for this idea. in this paper, we adopt this scheme to Booth multiplier which can be used real DSP systems. Also, zero input guarantees zero output that was not provided in previous paper. In addition, we propose bit extension scheme to reduce truncation error more and more. And, we adopted this multiplier to FIR filters for more efficient design.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.2
• /
• pp.139-144
• /
• 2011

The modern digital logic technology does not yet satisfy the speed requirements of real-time DSP circuits due to synchronized operation of multiplication and accumulation. This operation degrades DSP performance. Therefore, the double-base number system (DBNS) has emerged in DSP system as an alternative methodology because of fast multiplication and hardware simplicity. In this paper, authors propose a novel multiplication architecture. One operand is an output of a flash analog-to-digital converter (ADC) in DBNS format, while the other operand is a coefficient in the IEEE standard floating-point number format. The DBNS digital output from ADC is produced through a new double base number encoder (DBNE). The multiplied output is in the format of the IEEE standard floating-point number (FPNS). The proposed circuits process multiplication and conversion together. Compared to a typical multiplier that uses the FPNS, the proposed multiplier also consumes 45% less gates, and 44% faster than the FPNS multiplier on Spartan-3 FPGA board. The design is verified with FIR filter applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12C
• /
• pp.1617-1622
• /
• 2004

MPEG/Audio decoder for mobile multimedia systems requires low power consumption. Implementations of AV decoder using a single RISC processor often need high power consumption owing to cash-miss in case of insufficient cash memory. In this paper, we present a MPEG/Audio decoder for mobile handset applications and implement it on a RISC processor embedding a minimized DSP accelerator. Audio decoding algorithm is splined into two parts; computation intensive and control intensive parts. Those parts we, respectively, allocated to DSP and RISC core, which are designed to run in parallel to increase the processing efficiency. The proposed system implements MP3 and AAC decoders at l7MHz and 24MHz clocks, which are reductions of 48% and 40% of complexities in comparison with implementations on a single RISC processor. The proposed method is adequate for mobile multimedia applications with insufficient cash memory.