• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.158-163
• /
• 2011

Recently, more attention has been paid to DSC(Dye-sensitized Solar Cell) with the potential of glazing applications. The aim of the study is to analyze thermal and electrical performance according to composition of glazing with DSC. For this study, the electrical and thermal performance of glazing with DSC modules were measured and their result were compared. The measurement were performed according to the KS L2525 and with a solar simulator of DSC modules. The result show that the U-value of the DSC double glazings with clear glass and low-e glass were 2.78 $W/m^2K$ and 1.70 $W/m^2K$, respectively. The electrical measurement indicated that the electrical efficiency of the DSC double glazings with clear glass and low-e glass decreaced by 9.9% and 13.3%, respectively, compared to the DSC medules electrical performance.

• 융복합기술연구소 논문집
• /
• 제4권1호
• /
• pp.5-8
• /
• 2014

Recently ionic liquids received much attention as novel materials capable of replacing traditional solvents. The applicability of the ionic liquids should be determined based on their physico-chemical properties. Heat capacity is one of the most important properties to be considered when a process is developed using the ionic liquids and currently DSC has been proved as an effective technique to measure the heat capacity. Micro DSCII can measure heat capacities of various liquids by both an isothermal step method and a scanning method. DSC Q100 and MDSC are able to measure heat capacities of several ionic liquids. For each ionic liquid linear regression of the heat capacity as a function of temperature has been performed to increase accuracy. To investigate the feasibility of ionic liquids as PCMs, their heat capacities have been measured by using Pysis I DSC. This paper briefly summarizes the present techniques of measuring heat capacities of ionic liquids by DSC.

• Design & Manufacturing
• /
• 제17권1호
• /
• pp.1-5
• /
• 2023

In multi-material injection molding, since two or more materials with different process conditions are used, it is essential to maximize process efficiency by operating the cooling or heating system to a minimum. In this study, Liquid silicone rubber (LSR) that can be cured at a low temperature suitable for the multi-material injection molding was selected and the cure behavior according to the process conditions was analyzed through differential scanning calorimetry (DSC). Dynamic measurement results of DSC with different heating rate were obtained, and through this, the total heat of reaction when the LSR was completely cured was calculated. Isothermal measurement results of DSC were derived for 60 minutes at each temperature from 80 ℃ to 110 ℃ at 10 ℃ intervals, and the final degree of cure at each temperature was calculated based on the total heat of reaction identified from the Dynamic DSC measurement results. As the result, it was found that when the temperature is lowered, the curing start time and the time required for the curing reaction increase, but at a temperature of 90 ℃ or higher, LSR can secure a degree of cure of 80% or more. However, at 80 ℃., it was found that not only had a relatively low degree of curing of about 60%, but also significantly increased the curing start time. In addition, in the case of 110 ℃, the parameters were derived from experimental result using the Kamal kinetic model.

• 대한화장품학회지
• /
• 제38권3호
• /
• pp.197-200
• /
• 2012

보습제 베이스를 립스틱에 사용하여 보습효과가 우수한 제품개발에 응용하고자 DSC에 의한 결합수형성능, 수분보유능을 고찰하였다. 보습제 베이스를 배제한 견본에서 결합수 형성능은 5.12 %임을 알았다. 보습제 베이스함량에 따른 결합수형성능을 측정한 결과 보습제 베이스 함량이 증가함에 따라 결합수 형성능이 비례적으로 증가함을 DSC측정결과 알았다. 한편 DSC측정결과와 in vitro 수분보유능 측정법을 비교 실험한 결과 유사한 경향을 나타냄을 알 수 있었다. 따라서 DSC에 의한 결합수 형성능 측정법은 앞으로 립스틱 제품의 보습효과를 예측 하는데 유용한 방법으로 생각되었다.

• 방사성폐기물학회지
• /
• 제4권3호
• /
• pp.209-216
• /
• 2006

중성자가 조사된 흑연에 내재되어 있는 Wigner 에너지를 배출시키는 방법의 하나인 가열냉각공정의 적용 예로 DSC(미분 주사선 열량계) 측정을 통해 흑연으로부터 Wigner 에너지가 배출되는 열 배출 특성을 연구하였다. 일정온도 상승 방법 에 의한 DSC 운전에서 중성자가 조사된 흑연을 가열냉각(annealing)하는 동안 배출되는 Wigner 에너지의 총량과 처리온도에 따른 배출속도를 측정하였다. 연구로 2호기(KRR-2) thermal column 내에 위치별로 중성자의 조사량에 차이가 나는 흑연 시료를 분말로 만들어 상온에서 $500^{\circ}C$까지의 온도 범위에서 DSC를 운전하고 이로부터 Wigner 에너지의 배출 속도를 측정하였다. 가열냉각 동안 중성자가 조사된 흑연에서 배출되는 Wigner 에너지의 배출 특성은 가변적 활성화 에너지 속도 식으로 잘 상관시킬 수 있었다.

• Elastomers and Composites
• /
• 제53권2호
• /
• pp.52-56
• /
• 2018

The present study examines the transformation of dynamic DSC data into the equivalent isothermal data for the formation kinetics of a polyurethane elastomer. The reaction of 2'-dichloro-4,4'-methylenedianiline (MOCA) with a PTMG/TDI-based isocyanate prepolymer was evaluated. DSC measurement was performed in the dynamic scanning mode with several different heating rates to obtain the reaction thermograms. Then, the data was transformed into the isothermal data through a procedure based on Ozawa analysis. The main feature of this procedure was the transformation of $({\alpha}-T)_{\beta}$ curves from dynamic DSC into $({\alpha}-t)_T$ curves using the isoconversional $(t-T)_{\alpha}$ diagram. Validity was discussed for the relationship between the dynamic DSC data and the transformed isothermal results.

• 한국태양에너지학회 논문집
• /
• 제40권1호
• /
• pp.35-47
• /
• 2020

Due to the large window area, the lighting environment of the educational space between the window and deep part of the room is not uniformly illuminated, and the phenomenon of glare is severe. For this reason, the daylight performance of DSC-BIPV windows was analyzed in order to improve the natural lighting in the educational sector. The method derives the correlation with natural lighting by measurement and simulation. Dynamic simulation confirmed that the average illuminance of the target space was higher at later than the early afternoon. The performance of natural lighting at 40% and 30% transmission of DSC has the effect of significantly reducing the amount of excess light in existing windows. Nevertheless, the actual average illuminance in all seasons corresponds to the standard illuminance of the educational facility, 300 Lux. In addition, the uniformity is also seen through the skylight illuminance ratio.

• Food Science and Biotechnology
• /
• 제17권1호
• /
• pp.102-105
• /
• 2008

The freezing patterns of commercial frozen foods were characterized by using proton nuclear magnetic resonance ($^1H$ NMR) relaxometry and differential scanning calorimetry (DSC). The liquid-like components like unfrozen water were investigated as a function of temperature (10 to $-40^{\circ}C$) and then compared with the unfrozen water content measured by DSC. The formation of ice crystals and the reduction of water in the foods during freezing were readily observed as a loss of the NMR signal intensity. The proton NMR relaxation measurement showed that the decreasing pattern of the liquid-like components varied depending on the samples even though they exhibited the same onset temperature of ice formation at around $0^{\circ}C$. When compared with the unfrozen water content obtained by the DSC, the NMR and DSC results could be closely correlated at the temperature above $-20^{\circ}C$. However, the distinct divergence in the values between 2 methods was observed with further decreasing temperatures probably due to the solid glass formation which was not detected by DSC.

• 한국추진공학회지
• /
• 제22권4호
• /
• pp.55-60
• /
• 2018

열적 특성은 에너지 물질 분야에서 중요한 특성 중 하나로, 분해열을 방출하기 때문에, 열적 특성 분석에 DSC(Differential Scanning Calorimetry)가 자주 사용된다. 그러나 DSC 측정의 경우, 용융과 같은 열역학적 변화가 kinetics 분석에 방해를 끼친다. 이번 연구에서는 이 문제점을 해결하는 방안으로, 등온 조건으로 한 DSC 기초 데이터와 g 단위로 측정하는 ARC(Accelerating Rate Calorimetry)의 데이터를 이용하여 AKTS(Advanced Kinetics and Technology Solutions) thermokinetic 프로그램을 이용하여 열적 노화 특성을 예측, 비교한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.529-534
• /
• 2002

범세계 해상 조난·안전 시스템(Global Maritime Distress ＆ Safety System： GMDSS)에 따라 DSC(Digital Selective Calling) 전용 수신기, DSC 장치, VHF 송수신기 등이 국제항해에 종사하는 300GT 이상의 모든 선박에 의무적으로 탑재하도록 규정되었다. 또한, 최근에 국제해사기구(International Maritime Organization： IMO)는 GMDSS를 포함한 항해·통신 장비에 EMC 규정을 적용하도록 권고함에 따라 현재 선박에서 사용되는 대부분의 전자가 새로운 규정에 대응해야 하는 문제점에 직면하게 되었다. 본 연구에서는 채널 70 DSC 전용 수신기, DSC 장치, VHF 송수신장치가 집적된 장치에 대하여 예상되는 EMC 규정을 미리 적용 및 분석하여 보고 대처방안을 모색하였다. 시험은 도선 및 방사를 통한 불요파의 측정과 같은 전자파 간섭을 비롯하여 전압, 주파수 변위에 대한 내성과 정전기 방전에 대한 내성을 포함한 다양한 전자파 감응성 시험 등이 적용되었고 이에 따른 국내외 제품의 전원 및 접지에 대한 문제점을 파악할 수 있게 되었다.