• 한국자동차공학회논문집
• /
• 제4권6호
• /
• pp.78-84
• /
• 1996

In order to eliminate TPM(Total Particulate Matter) from a diesel engine, we designed and developed a particulate trap system using a burner, which was named as AEFR(Active Exhaust Feeding Regeneration) system. We have considered the temperature distributions and gradients in the filter being regenerated according to regeneration control schemes Ⅰ, Ⅱ and Ⅲ. Schemes Ⅲ has shown the most desirable peak temperature and temperature gradients in AFER system. Finally, it was concluded that much lower peak temperature and temperature gradients in the filter could be obtained than that of other advanced research results by our AEFR system.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 춘계학술대회 논문집
• /
• pp.327-328
• /
• 2003

경유자동차는 연료 특성상 매연을 포함한 입자상물질을 다량 배출하고 있으며, 이러한 디젤입자상물질은 인체에 유해한 발암성 및 돌연변이원성 물질들을 함유하고 있기 때문에 호흡 등을 통한 인체 유입시 건강에 매우 유해하다. 그러므로 디젤입자상물질을 저감시키기 위한 여러 가지 기술들 중 발생된 배출가스가 배기관을 통해 대기중으로 배출되기 전에 엔진 연소실과 배기관 사이에 후처리장치와 같은 기술들을 이용하여 이를 저감시키고 있다. 본 연구에서는 후처리장치들 중 세라믹필터에 백금과 같은 산화성이 우수한 촉매를 코팅하여 만든 촉매식 매연여과장치(DPF ; diesel particulate filter, SK제공)를 사용하였을 때 입자저감성능 및 입자크기별 분포특성을 살펴보고자 하였다. 이를 통해 도시대기오염 저감대책을 기초자료 및 환경학적, 보건학적 연구에 적극 활용하고자 한다. (중략)

• Tribology and Lubricants
• /
• 제26권4호
• /
• pp.240-245
• /
• 2010

This paper describes the influence on engine main bearing behavior of the oil film when the fuel is diluted on a diesel engine equipped with DPF system. Oil film pressure and the thickness is calculated in accordance to the fuel dilution. The calculation is based on the numerical analysis of the engine main bearing. As a result, the engine oil viscosity decreased as the fuel dilution increased. This led the increment of the maximum oil thickness pressure. Verification of the minimum oil film thickness settlement by the engine gas pressure and the fuel dilution was confirmed. Destruction possibility of the engine main bearing was foreseen when the engine speed was 2000 rpm with the fuel dilution 15% and the 5W40 engine oil.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권6호
• /
• pp.1244-1249
• /
• 2001

The characteristics of engine performance with fuel injection system in D.I. diesel engine were studied in this paper A fuel injection system has an important role in the performance and emission gas in a diesel engine. In this paper, an experimental study has been performed to verify the effect of the performance and the emission gas with the factors such as diameters of an injection nozz1e hole, diameters of an injection pipe and injection timing in the fuel injection system. The authors have obtained the results that optimizing the factors of fuel injection system is siginificant to enhance the performance of the engine system and consumption ratio of fuel, smoke, and NOx.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.37-38
• /
• 2012

Two catalyst systems with different content of precious metal coated on DOC are carefully tested in a diesel engine to investigate the emission characteristics of $NO_2$. Three types of experiment methods ($NO_2$ conversion test, ETC mode test, and BPT test) are applied to compare the performance of the two catalyst systems. All the experimental results consistently indicate that it is possible to satisfy $NO_x$ regulation by properly lowering the content of precious metal without the loss of PM removal performance.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.446-447
• /
• 2010

최근 개발된 니켈 초합금 금속폼은 기존의 매연저감장치 신소재로 여겨지고 있다. 금속폼은 세가지 두드러진 특징을 갖고 있다. 첫째, 금속폼은 큰 기공의 다공성 매질로써 매연을 포집하여 축적할 수 있는 용량이 기존 필터에 비해 상대적으로 크며 그로인하여 재생 시 연소 안전성이 두드러진다. 둘째, 복잡하고 굴곡있는 기공 구조와 큰 비표면적은 물질전달 특성을 향상시켜 촉매 적용 시 촉매의 전환성능을 향상시키고 그로 인하여 귀금속 촉매량을 줄일 수 있는 장점이 있다. 셋째, 금속폼은 다양한 기공크기를 가지며, 다양한 조합의 금속폼을 개발할 수 있어 요구 성능에 따른 최적의 필터 설계를 가능케 한다. 이번연구에서는, 금속폼의 필터 성능을 다양한 실험을 통하여 측정 평가하며, 이런 이해를 기반으로 필터로 제작하여 엔진실험벤치에서 그 성능을 검증하였다. 필터의 성능은 수트 포집효율과 그에 따른 필터의 압력강하와 촉매 활성 능력으로 평가되었다. 이러한 실험과 병행하여 금속폼에서의 수트 포집과정을 모델링하고 이를 상용 프로그램인 CFD-ACE+에 추가하여 설계전용 프로그램을 개발하였으며, 엔진실험결과와 비교 검증하였다. 본 논문에서는 금속폼의 높은 매연축적용량과 향상된 물질전달 특성이 어떻게 필터의 귀금속 촉매와 체적을 줄일 수 있는지 제시하고 있다.

• 동력기계공학회지
• /
• 제15권6호
• /
• pp.16-21
• /
• 2011

Over the past years, many research works have been carried out to investigate the factors which govern the performance of diesel engine. The air pollutant emission from the diesel engine is still a significant environmental concern in many countries. In the present study, new system of smoke filtration of diesel engine is proposed. This new system is using vacuum equipment and filter for capture smoke. To verification new system experiments are performed at diesel vehicle and engine dynamometer. As a result it is founded that smoke is decreased of 67% at vehicle test and decrease of 45.2% at full load condition of engine dynamometer test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.11-12
• /
• 2008

본 논문에서는 전력IT 국책과제로 선정된 한국형 에너지 관리시스템(Korean Energy Management System, K-EMS)의 네트워크 해석 프로그램 중 하나인 급전원 조류계산(Dispatcher Power Flow, DPF) 프로그램의 구축 및 통합에 대해서 다룬다. 여기에서는 조류계산의 기본기능 보다는 실시간 운영을 위한 DB, 프로세스, 화면 간 연계방법을 설명하고, 기존 Off-line 검토용 조류계산 프로그램과의 차이점 및 급전원 조류계산 환경에 대해 서술한다. 본 논문에 소개된 급전원 조류계산 프로그램은 K-EMS의 중간 결과물인 Baseline 단계의 성과이며, 국내 실계통 데이터를 취득하여 성공적으로 실증시험을 마친 결과임을 밝혀둔다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.97.1-97.1
• /
• 2012

Porous ceramics are widely used for applications such as catalysis supports, gas distributors and filters such as DPF. For these purpose, it is important to have proper porosity controlling pore structure while maintaining mechanical and thermal properties. In this work, we have prepared the porous ceramic structures made of reaction bonded silicon nitride with hierarchical pore structures. Uni-directionally aligned pore channels, which are mostly filled with ${\beta}$-Si3N4 whiskers, were achieved by an ice-templating method. The structures of the pore channels and the walls are controllable by the processing conditions, such as solid concentration, freezing rate of the slurry, and additives. We have investigated and characterized the influences of the conditions on the microstructures and the properties, such as porosity, pore size distribution, lamellar thickness, wavelength, and orientations. The compressive strength test and flow test was performed to determine the structural integrity and air permeability.

• 한국자동차공학회논문집
• /
• 제3권6호
• /
• pp.41-54
• /
• 1995

A mathematical model for wall-flow monolith ceramic diesel particulate filter was developed in order to describe the processes which take place in the filter during regeneration. The major output of the model comprises ceramic wall temperature and regeneration time(soot reduction). Various numerical tests were performed to demonstrate how the gas oxygen concentration, flow rate and the initial particulate trap loading affect the regeneration time and peak trap temperature. The model is shown to b in reasonable agreement with the published experimental results. This model can be applied to predict the thermal shock failure due to high temperature during combustion regeneration process.