• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.2
• /
• pp.183-190
• /
• 2014

A multiphase pump was developed in this study. The optimum multiphase pump design was arrived at, and the interactions among the different geometric configurations were explained by applying numerical analysis and the DOE (design of experiments) method. First, we designed the base model to meet the specifications. Then, we defined the design parameters related to the meridional plane and the blade angle. Each design parameter was used for generating experiment sets, and numerical analyses were performed on these sets. Finally, the optimized design was selected based on the results of the DOE analysis. The numerical optimization resulted in the optimum model having higher efficiency than the base model. In addition, performance degradation due to changes in the GVF (gas volume fraction) is discussed.

• Korea Journal of Geothermal Energy
• /
• v.8 no.2
• /
• pp.16-21
• /
• 2012

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.106-113
• /
• 2008

The starter motor noise is usually well identified by the customers since it is operated while the engine is quiet, and leaves distinct impressions of the vehicle. In this study the design of experiments(DOE) was applied to the identification of the noise sources of direct drive starter motor since this process usually requires lengthy analysis and elaborate experiments. In the first stage of the test, five controllable factors(alignment and dynamic unbalance of armature, tightening torques of T/bolt and center bracket bolt, and alignment of the center bracket-yoke-rear bracket), excluding static unbalance, are sorted out of all possible factors. Test results showed that the dynamic unbalance and misalignment of armature are the major factors. However, the error level of the first test was relatively high, indicating that there might be some missing major factors. In the second stage test the results showed that both static and dynamic unbalances are the dominant factors contributing to more than 80% of the overall noise, while the misalignment contributes around 12%. Error of the second test was about 4% that could be considered satisfactory. The noise level of the optimal product was predicted to be reduced by 19dBA, and verification test showed the average noise reduction of 16.8dBA with the standard deviation of 3.2dBA, and proved the usefulness of the whole DOE process.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.1
• /
• pp.74-85
• /
• 2010

In order to formulate the compounded polypropylene(C-PP) which is suitable to an automotive door trim panel, 9 sorts of properties were measured after manufacturing the C-PP using an extruder and an injection machine with polypropylene(PP), ethylene-octene rubber(EOR) and talc. Mixture design, especially extreme vertices design, in DOE with MINITAB - commercial software was used to analyze the data. The relations between each property and each component, for example, $y=0.00907222x_1+0.00870556x_2+0.0155722x_3$ for specific gravity, were found out by the regression analysis and the variance analysis. The optimized formulation of the C-PP for an automotive door trim panel was acquired at PP(77.6962), EOR(11.0238) and talc(10.2800) by use of the response optimizer(mixture) in MINITAB.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.5
• /
• pp.65-71
• /
• 2006

This paper presents the robust design of gripper part for a high-speed LCD(Liquid Crystal Display) transfer system. In this paper, the $1^{st}$ DOE(Design of Experiment) is conducted to find out main-effect factors for the design of gripper part. Thirty-six analysis are performed using $ANSYS^{(R)}$ and their results are statistically analyzed using $MINITAB^{(R)}$, which shows that the factors, i.e., First-width, Second-width, Rec-width, and thickness of gripper part, are more important than other factors. The main effect plots shows that the maximum deflection and mass of gripper part are minimized by increasing First-width, Second-width, Rec-width and thickness. The $2^{nd}$ DOE is conducted to obtain RSM(Response Surface Method) equation. The CCD(Central Composite Design) technique with four factors is used. Optimum design is conducted using the RSM equation. Genetic algorithm is used for optimal design. Six sigma robust design is conducted to find out a guideline for control range of design parameter. To obtain six sigma level quality, the standard deviations of design parameters are shown to be controlled within 5% of average design value.

• Journal of Powder Materials
• /
• v.20 no.3
• /
• pp.191-196
• /
• 2013

Nano-sized cobalt powder was fabricated by wet chemical reduction method at room temperature. The effects of various experimental variables on the overall properties of fabricated nano-sized cobalt powders have been investigated in detail, and amount of NaOH and reducing agent and dropping speed of reducing agent have been properly selected as experimental variables in the present research. Minitab program which could find optimized conditions was adopted as a statistic analysis. 3D Scatter-Plot and DOE (Design of Experiments) conditions for synthesis of nano-sized cobalt powder were well developed using Box-Behnken DOE method. Based on the results of the DOE process, reproducibility test were performed for nano-sized cobalt powder. Spherical nano-sized cobalt powders with an average size of 70-100 nm were successfully developed and crystalline peaks for the HCP and FCC structure were observed without second phase such as $Co(OH)_2$.

• Journal of the Korean Home Economics Association
• /
• v.39 no.5
• /
• pp.89-105
• /
• 2001

This study on Jeung San Kyo, one of Korea's new religions, considered the name, kind, form, color and the thoughts of ritual dress which is involved in 15 religious blanches acting currently according to books and the actual research. The following is below. 1 Each names of ritual dresses called rigious branches are Bob Bok(법복), Doh Bok(도복), Yeah Bok(예복) and Jea Bok(제복). 2 In most religious blanches, ritual dress is the Korean cloths which Poh is wear above and Kwan is put on, and the form of Poh(포) is the similar with Durumagi(두루마기), Danryungpoh(단령포), Jungchimak(중치막), Jikryungpoh(직령포) etc, but not the form of Git, Moo and Yiohmim. Kwanmoh is named Chill-Chung-Kwan(칠층관), Yiun-Hwa-Kwan(연화관), Yiun-Kwan(연관), In-Hwa-Kwan(인화관), Tong-Chon-Kwan(통천관) etc. 3. In most religious orders but Dae Suun Jin Li Hueay(대순진리회), Jeung San Doe Jang(증산도장), Colors are used, white, lightblue, and yellow is used in Jeung San Pop Jong Kyo(증산법종교), Dong Doe Pop Jong Gyum Gang Doe(동도법 종금강도). White color means the mind of a people tradition, and light blue expresses an Oriental nation, namely, “Korea”, and is the color representing Jeung San Kyo, and yellow shows the central religion in the future. 4. Jeung San Kyo ceremony fashion reflects the ideologies of the principal role, the Um and Yang-five elements, and, nationalism according to form, color.

• Journal of Distribution Science
• /
• v.21 no.2
• /
• pp.53-63
• /
• 2023

Purpose: This study aims to determine the effect of Customer Experience Management (CEM) on the distribution of Marketing Performance mediated by Digital Business Innovation (DBI), Digital Operational Excellence (DOE), and Digital Value Co-Creation (DVC) in Indonesia Information & Technology (IT) industry. Research design, data, and methodology: This research was conducted in two stages, namely exploratory and explanatory on IT companies in Indonesia. The authors took 132 samples using proportionate random sampling method in three groups of companies. Results: The results showed that CEM had no significant positive effect on the distribution of Marketing Performance. CEM has no direct effect on the distribution of Marketing Performance through the mediation of DBI. CEM has direct effect on the distribution of Marketing Performance through the mediation of DOE and DVC. DBI has no significant effect in increasing the distribution of Marketing Performance. However, DOE and DVC have a significant effect in increasing the distribution of Marketing Performance. Conclusion: The distribution of Marketing Performance can be indicated better through CEM through mediation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.8
• /
• pp.1810-1817
• /
• 2004

A diffractive optical element(DOE) for an optical pickup system is proposed in this thesis. Optimization algorithms are used to synthesise the DOE to meet a detailed specification of the two kind of cost function. The one isso called as apodization which refers to the process of suppressing the secondary maxima and the other is so called as sharpness which refers to the process of reducing the size of primary maxima. The result obtained by simplex optimization method is that the apodization and sharpness are well achieved separately. In apodization, the secondary maxima is reduced up to 39%. And in sharpness, the size of first maxima is reduced to 95.2％.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.1
• /
• pp.43-49
• /
• 2013

The aim of this study was to compare both the performance of litters derived from two sire genetic origins (SGO), Vienna Blue (VB) and Burgundy Fawn (BF), along successive seasons of birth (SB; winter, spring, summer and autumn), and doe reproductive performance in an organic production system. A total of fifty-eight does consisting of a mixture of crosses of several medium-large size breeds at different parity order (P, 1 = nulliparous; 2 = primiparous; ${\geq}3$ = multiparous) and twelve males (6 VB and 6 BF) were housed indoors at environmental conditions that followed seasonality. An extensive reproductive rhythm was used and kits were weaned at $46{\pm}6$ d of age. Doe reproductive performance and the data of 105 litters (55 from VB and 50 from BF SGO) were recorded throughout the SB. No statistically significant differences related to SGO effect were observed. As regards parity order, multiparous does showed higher live weights (LW) (p<0.05), total born (p<0.01), total born alive (p<0.05) per delivery, and litter weight of born alive (p<0.05), but lower milk output at 21st d than primiparous does (p<0.05). The extensive reproductive rhythm mainly increased litter performance at birth in multiparous does but was not sufficient to permit a complete recovery of body reserves lost during lactation. Autumn SB negatively affected doe LW variation between deliveries. The number of pups born and born alive per delivery (p<0.05) and litter size at 21 d of age and at weaning (p<0.01) were lower during hot SB. Due to the lower litter size of pups born in summer and autumn, their individual weight at 21st d of age and daily individual growth rate 0 to 21 d were higher than those of pups born in winter (p<0.001). Litter performance at 21st d of age and individual pup pre-weaning growth rate were poorer for those born in spring than in other seasons due to the harmful effects of increased environmental temperatures. SB affected most of the performance traits of does and young rabbits reared under the organic farming system. The rabbits seemed better suited to organic rearing conditions during winter than in other seasons. The worst results overall were obtained in the spring SB, whereas the hot SB negatively affected both doe energy balance and prolificacy. In conclusion, the pups of the 2 SGO showed good pre-weaning performance and seemed suited to the organic rabbit production system.