• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.116-125
• /
• 1997

This paper presents a novel method, entitled Orthogonal Weights Searching(OWS), for the Direction-Of-Arrival(DOA) estimation. Utilizing the modified Conjugate Gradient Method(MCGM), the weight vector which is orthogonal to the signal subspace is directly computed from the signal matrix. The proposed method does not require the computation of the eigenvalues and eigenvectors. In addition, the new technique excludes the procedure for the detection of the number of signals under the assumption that the number of weights in the array is greater than the number of input signals. Since the proposed technique can be performed independently of the detection procedure, it shows a good performance in adverse signal environments in which the detection of the number of array inputs cannot be obtained successfully. The performance of the proposed technique is compared with that of the convectional eigen-decomposition method in terms of angle resolution for a given signal-to-noise ratio(SNR) and a required amount of computations.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.1
• /
• pp.1-10
• /
• 2005

This paper presents a wideband LPA (local polynomial approximation) beamforming algorithm that is appropriate for wideband moving sources. The Proposed wideband LPA algorithm adopts STMV (steered minimum variance) method that utilizes a steered covariance matrix obtained from multiple frequency components in one data snapshot, instead of multiple data snapshots in one frequency bin. The wideband LPA cost function is formed using STMV weight vector. The Proposed algorithm searches for the instantaneous DOA and angular velocity that maximize the wideband LPA cost function. resulting in a higher resolution performance than that of a DS LPA beamforming algorithm. Several simulations using artificial data and sea trial data are used to demonstrate the performance of the Proposed algorithm.

• Polymer(Korea)
• /
• v.38 no.2
• /
• pp.213-219
• /
• 2014

The rheological characteristics of highly concentrated polymer bonded explosive simulant were studied. Hydroxyl terminated polybutadiene (HTPB) and polyethylene plastomer (Exact) were used as binders. Sugar and Dechlorane particles whose physical properties are similar to research department explosive (RDX) were used as fillers. When HTPB was used, diethyl hexyl adipate (DEHA or DOA) was used as a plasticizer together for some cases. Highly concentrated suspensions were mixed in a batch melt mixer (Rheomixer 600, Haake) and rheological properties were measured by plate-plate and capillary rheometers. Wall slip phenomena, thixotropy with shear hysteresis, and flow instability were investigated as shear rate and amount of fillers changed.

• Imaging Science in Dentistry
• /
• v.37 no.1
• /
• pp.53-59
• /
• 2007

Purpose : Bone mineral density (BMD) and bone microarchitecture are important determinants for bone strength. Recently micro-CT have provided possibilities for measuring a variety of structural indices to characterize bone microarchitecture. The objective of this study was to compare the BMD and micro-CT parameters with Young's modulus calculated by finite element analysis (FEA) for the evaluation of bone strength. Materials and Methods Bone specimens were obtained from the 18 female rabbits aged 16 weeks. Of those, 36 samples (right and left femur) were selected for 3D micro-CT analysis $(ANT^{TM},\;SKYSCAN,\;Belgium)$ and BMD by PIXlmus 2 (GE Lunar Co. USA). Five microstructural parameters of micro-CT, such as trabecular thickness (Tb.Th), bone specific surface (BS/BV), percent bone volume (BV/TV), structure model index (SMI) and degree of anisotropy (DOA) were studied. Young's modulus was obtained by software program (ANSYS 9.0, ANSYS Inc, Canonsburg, PA) based on micro-CT three dimensional images. Results : Young's modulus assessed by FEA correlated significantly with Tb.Th, BV/TV, BS/BV and SMI respectively. Young's modulus showed higher correlation with these rnicrostructural parameters of micro-CT than BMD. Microstructural parameters except DOA showed significant correlations within the examined group. Conclusion The microarchitectural parameters o( micro-CT and BMD represented some informations in the evaluation of bone strength assessed by FEA.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.4
• /
• pp.274-280
• /
• 2009

In order to estimate the accurate location of a user, Global Positioning system (GPS) requires at least four satellites. Since a conventional despreader operate for an GPS signal of interest, we need multiple despreaders for detecting multiple GPS signals. In this paper, we introduce the extension of the recently proposed system consisting of a null despreader, a conventional despreader, multi-stage CM (constant modulus) array, for the multiple GPS signals, and present the mathematical expression of the signal-to-interference-and-noise ratio (SINR). The extended system does not require the exact information of the direction of arrival (DOA) to suppress the directional interferences. We present the computer simulation to demonstrate the interference suppression performance of the proposed system for multiple GPS signals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9C
• /
• pp.871-879
• /
• 2009

The performance variations of a spatio temporal smart antenna which is equipped at the basestation of CDMA cellular communication network due to the parametric change of multipath fading environment are studied in this paper. The smart antenna of interest employs space diversity based adaptive array structure in conjunction with rake receiver that has fingers the number of which is the same as that of multipath links. The beamforming is achieved via LMS(Least Mean Square) algorithm in which a reference signal is generated using decision directed formula. It has been shown by computer simulation that the performance of our smart antenna of interest depends significantly upon not only the degree of desired signal's DOA(Direction of Arrival)spread but the number of fingers of the rake receiver. The relative insensitivity of the smart antenna's performance on desired signal's delay spread has also been observed. Computer simulation has shown that the increase of the number of fingers brings in a nonlinear enhancement of the performance of our smart antenna. The renewal of weight vector in the beamforming procedure is taken place at post PN despread stage.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.6
• /
• pp.32-38
• /
• 2017

Plasticizers play roles in increasing plasticity or fluidity during mixing. Representative plasticizers are DOS, DOA, IDP and BTTN. In particular, BTTN is an energy plasticizer that helps propellant performance and is widely used. However these compounds are sensitive relatively. So, in order to develop insensitive energetic plasticizer, synthesis of one of the derivatives of triazole, 4,5-bis (azido methyl)-(1-butyl)-1,2,3-triazole (1-DABTR), was studied. Also, the compound was characterized by NMR, IR spectroscopy, and physicochemical properties such as glass transition temperature, melting point, decomposition temperature, density, viscosity and impact sensitivity were measured. In addition, the heats of formation (${\Delta}H_f$) of 1-DABTR was also calculated using Gaussian 09.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.1832-1838
• /
• 2009

In this paper, we present new signal de-interleaving method for the frequency agility radar in which the carrier frequency is changed irregularly. Generally radar use a fixed carrier frequency, and it is easy for electronic warfare system to de-interleave the radar signal with respect to the frequency, pulse width(PW), and direction of signal arriving(DOA). In frequency agility radar, it is difficult to de-interleave the radar signals according to the carrier frequency because the frequency is changed irregularly. We suggest a good de-interleaving method to identify the frequency agility radar signals in comparison with PRI's of radars. First we calculate pulse repeat Interval(PRI) of radar in linked-list and queue structure and de-interleave the radar signals with PRI, PW, and DOA, then identify the frequency agility radar. When we use the proposed algorism to the frequency agility radar, we have a good de-interleaving results with electronic warfare systems.

• Journal of the Korean Chemical Society
• /
• v.37 no.8
• /
• pp.773-778
• /
• 1993

Poly(vinyl chloride)(PVC) membrane electrodes based on the lipophilic neutral carrier, dibenzo-18-crown-6(DB18C6) and benzo-15-crown-5 (B15C5) as the active sensors for Tl$^+$ ion have been prepared and tested in different content of the potassium tetrakis(4-chlorophenyl)borate (KTClPB) as lipophilic salt. Dioctyl adipate (DOA), 2-nitrophenyl phenyl ether (NPPE) and o-nitrophenyl actyl ether (NPOE) were used as plasticizing solvent mediators. Electrodes exhibited good linear responses of 40∼55 mV decade$^{-1}$ for Tl$^+$ ion within the concentration ranges 10$^{-1}$∼10$^{-5}$M TlNO$_3$. Selectivity coefficients of interfering ions (alkali metal, alkaline earth metal and some transition metal ions) for Tl$^+$-ISE were determined by separate solution method and were sufficiently small for most of them. These crown ether type ion-selective electrodes are suitable for use with aqueous solution at pH > 3.

• ETRI Journal
• /
• v.43 no.5
• /
• pp.869-880
• /
• 2021

Herein, we estimate the direction of arrival (DOA) of non-Gaussian signals for nested arrays (NAs) by implementing the fourth-order difference co-array (FODC) and successive methods. In particular, considering the property of the fourth-order cumulant (FOC), we first construct the FODC of the NA, which can obtain O(N⁴) virtual elements using N physical sensors, whereas conventional FOC methods can only obtain O(N²) virtual elements. In addition, the closed-form expression of FODC is presented to verify the enhanced degrees of freedom (DOFs). Subsequently, we exploit the vectorized FOC (VFOC) matrix to match the FODC of the NA. Notably, the VFOC matrix is a single snapshot vector, and the initial DOA estimates can be obtained via the discrete Fourier transform method under the underdetermined correlation matrix condition, which utilizes the complete DOFs of the FODC. Finally, fine estimates are obtained through the spatial smoothing-Capon method with partial spectrum searching. Numerical simulation verifies the effectiveness and superiority of the proposed method.