• 제목/요약/키워드: DNP3.0

검색결과 73건 처리시간 0.034초

배전자동화통신망을 위한 DNP 3.0 최적 설계 방안 (Optimal design of DNP 3.0 network for the Distribution Automation System)

  • 김태경
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2009년도 제40회 하계학술대회
    • /
    • pp.422_423
    • /
    • 2009
  • DNP 3.0 is the most widely used data communication protocol for electric power control systems. KEPCO(Korea Electric Power Corporation) also uses DNP 3.0 as a data transmission protocol for the DAS(Distribution Automation System) and the SCADA system of the transmmission system. But DNP 3.0 is one of the oldest industrial standard having many restrictions and there are many considerations for optimal design of DNP 3.0 network for the Distribution Automation System.

  • PDF

DNP 3.0과 IEC 61850 게이트웨이 기능 설계 (Design of the Gateway Function for DNP3.0 and IEC61850)

  • 송병권;김건웅
    • 전기전자학회논문지
    • /
    • 제12권3호
    • /
    • pp.151-157
    • /
    • 2008
  • 전력 설비를 감시하고자 하는 SCADA 시스템 표준으로 대표적인 프로토콜이 DNP3.0과 IEC61850이다. 두 표준은 각각의 특성과 장단점을 가지고 있으며, 따라서 상당 기간 두 표준이 공존할 것으로 예상된다. 본 논문은 두 프로토콜 간 변환 기능을 제공하는 게이트웨이 기능을 설계한 내용을 소개한다. 두 표준 모두 객체지향 모델링을 이용하여 유 사점이 많지만, DNP3.0 객체는 객체 번호와 인덱스로 묘사되고, IEC61850 객체는 이름으로 묘사된다. 따라서 이들을 변환시켜주는 기능이 필요하다. 또한 각 표준의 통신 프리미티브를 분석하여 변환 가능한 프리미티브를 표로 정리하고, 게이트웨이 기능의 처리 절차를 제안하였다.

  • PDF

Distributed Network Protocol Version 3.0을 이용한 필드버스 시스템 구현 (Implementation of a Fieldbus System Based On Distributed Network Protocol Version 3.0)

  • 김정섭;김종배;최병욱;임계영;문전일
    • 제어로봇시스템학회논문지
    • /
    • 제10권4호
    • /
    • pp.371-376
    • /
    • 2004
  • Distributed Network Protocol Version 3.0 (DNP3.0) is the communication protocol developed for the interoperability between a RTU and a central control station of SCADA in the power utility industry. In this paper DNP3.0 is implemented by using HDL with FPGA and C program on Hitachi H8/532 processor. DNP3.0 is implemented from physical layer to network layer in hardware level to reduce the computing load on a CPU. Finally, the ASIC for DNP3.0 has been manufactured from Hynix Semiconductor. The commercial feasibility of the hardware through the communication test with ASE2000 and DNP Master Simulator is performed. The developed protocol becomes one of IP, and can be used to implement SoC for the terminal device in SCADA systems. Also, the result can be applicable to various industrial controllers because it is implemented in HDL.

DPA(DNP3.0 Protocol Analyzer) 플랫폼 개발 (Development of DPA(DNP3.0 Protocol Analyzer) Platform)

  • 송병권;이상훈;정태의;김건웅;김진칠;김영억
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2008년도 한국컴퓨터종합학술대회논문집 Vol.35 No.1 (D)
    • /
    • pp.480-484
    • /
    • 2008
  • DNP3.0은 산업 분야에서 SCADA(Supervisory Control And Data Aquisition) system의 개방형 프로토콜로 사용되어지고 있다. 본 논문에서는 개발하거나 개발된 Module들 사이에서 송 수신되는 DNP3.0 PDU를 분석할 수 있는 기능을 제공하는 DPA(DNP3.0 Protocol Analyzer) Module을 설계 및 구현하였다. 해당 Master Station에서 Request 메시지를 생성하여 Outstation으로 전송하고 Outstation에서 수신된 Request 메시지를 분석하여 Response 메시지를 생성하여 Response 한다. 또한 Master Station 과 Outstation에서 DNP3.0 프로토콜을 사용하여 통신하는 중간에서 송 수신하는 메시지를 Monitoring한다.

  • PDF

DNP3.0 프로토콜을 이용한 배전계통 멀티 에이전트 보호시스템의 통신 모듈 개발에 관한 연구 (A Study on the Development of an Agent Communication Module for a Multi-Agent Based Power Distribution Network Protection System Using DNP 3.0 Protocols)

  • 최면송;이한웅;민병운;정광호;이승재;현승호
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제52권9호
    • /
    • pp.506-512
    • /
    • 2003
  • In this paper, a communication module between Relay agents in a multi-agent system based power distribution network protection system is realized using DNP3.0(Distributed Network Protocol), which is the standard communication protocol of distribution automation system in KEPCO. The key words for agent communication in the multi-agent based protection system are defined and represented by use of DNP application function code. The communication module developed based on the proposed communication scheme is tested by use of the Communication Test Harness, a test tool for DNP protocol, then used to the multi-agent system based power distribution net work protection system.

DNP3.0 트래픽 모니터링 시스템 (DNP3.0 Traffic Monitoring System)

  • 송병권;김새벽;정태의;김건웅
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2008년도 춘계학술발표대회
    • /
    • pp.845-848
    • /
    • 2008
  • DNP3.0(Distributed Network Protocol 3.0) 프로토콜은 자동화 처리 시스템 사이에서 Master와 Slave의 개념을 적용한 프로토콜로써 현재 한전 SCADA 시스템의 표준 프로토콜로 선정되어 원방 감시 제어용으로 사용되고 있다. 이 DNP3.0 데이터를 RS-232C를 이용해서 전송 할 때, 각각의 DNP3.0 Layer인 DataLink Layer, Transport Layer 그리고 Application Layer의 분석 모듈을 설계하고 구현하였다.

Solid State Dynamic Nuclear Polarization of 1H Nuclear Spins at 0.3 T and 4.2 K

  • Shim, Jeong Hyun
    • 한국자기공명학회논문지
    • /
    • 제21권4호
    • /
    • pp.114-118
    • /
    • 2017
  • Here, I report solid state Dynamic Nuclear Polarization (DNP) of $^1H$ nuclear spins at 0.3 T and 4.2 K. The DNP polarizer was developed based on a commercial X-band Electron Spin Resonance (ESR) modified for DNP, in combination with a NMR console and a liquid-Helium cryostat. By detuning magnetic field, DNP spectrum was measured to find the optimal condition. At +3 mT detuned from on-resonance field, $^1H$ NMR signal of 60:40 glycerol/water frozen solution doped with 20 mM perdeuterated-Tempone was amplified 43 times. The $^1H$ spin polarization obtained at 4.2 K is over 3100 times higher than that at 300 K. The width of the DNP spectrum, which is five times broader than ESR spectrum, is inconsistent with solid effect or thermal mixing, and presumably suggests a different DNP mechanism.

DNP3.0을 이용한 과전류 계전기 에이전트의 통신 방안 연구 (A Study on communication method between OverCurrent Relay Agents using DNP 3.0)

  • 이한웅;정광호;임성일;현승호;최면송;이승재
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 추계학술대회 논문집 전력기술부문
    • /
    • pp.265-267
    • /
    • 2002
  • In this paper, the communication between Over-Current Relay agents is realized using DNP(Distributed Network Protocol), which is the standard communication protocol of distribution automation system in KEPKO. The key words in OCR agent communication are defined and represented by use of DNP application function code. And the DNP index for OCR agent is defined. The proposed communication scheme is tested by use of Communication Test Harness, a test tool for DNP protocol to show its soundness.

  • PDF

Bence Jones 단백질(蛋白質)의 정제(精製) 및 N-말단검출(末端檢出) (Purification and N-Terminal Study of Bence Jones Proteins)

  • 김준평
    • Applied Biological Chemistry
    • /
    • 제13권1호
    • /
    • pp.59-64
    • /
    • 1970
  • Bence Jones 단백질(蛋白質)(As,Ik,In)를 DEAE-Sephadex A-50 Column으로 0.02M phosphate Buffer(pH8.)와 0.5M NaCl를 gradient로 사용(使用)해 정재(精製)하였다. 시료(試料) As(K-형(型))의 정재결과(精製結果) 주성분(主成分)인 F-1는 조단백질(粗蛋白質) 500mg로부터 350mg 얻었으며 다른 시료(試料) Im와 Ik($lambda$-형(型))에서도 각각 주성분(主成分)을 242mg(Im)와 146mg(Ik) 얻을 수 있었다. 정재(精製)한 시료(試料)는 그의 순도(純度)를 알기 위해 Poly acryl amide의 Disc electrophoresis로 확인한 후 K-형(型) Bence jones단백질(蛋白質)의 일종(一種)인 As와 $lambda$-형(型)의 일종(一種)인 IM를 6N-HCI로 $105^{\circ}C$에서 20시간(時間) 가수분해(加水分努)후 Amino 산(酸) 조정(組成)을 살펴보았다. DNP법(法)으로 시료(試料) K-형(型)(As, Ko, Ta)의 단백질(蛋白質)의 N-말단(末端)을 검출(檢出)해 Ta는 glutamic acid, Ko, As는 Aspartic acid임을 확인하였으며 Paper 상(上)에 나타난 DNP-Amino 산(酸)은 5% $NaHCO_3$ (pH8) 4ml에 추출(抽出)해 그 수량(收量)을 ${\varepsilon}=18.1{\times}10^3DNP$ $Asp\;{\varepsilon}=17.41{\times}10^(3){\;}DNP{\;}Glu$에 의(依)해 산출(算出)하였더니 Ko는 54.3%, As는 65%이였으며 Ta는 85%의 수량(收量)이였다. ${\lambda}$-형(型)의 Im,Ik의 시료(試料)도 DNP법(法)으로 N-말단(末端)을 검출(檢出)해 보았더니 검출(檢出)되지 아니하였다.

  • PDF

범용 SCADA 게이트웨이 개발을 위한 DNP 3.0 응용 계층 분석 (A Study on the Application Layer of the DNP3.0 for Development of General SCADA Gateways)

  • 김건웅;송병권;김새벽
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2008년도 춘계학술발표대회
    • /
    • pp.931-934
    • /
    • 2008
  • SCADA 시스템과 관련된 많은 표준 프로토콜이 등장하고 있으며, 이들 프로토콜들이 공존하는 형태로 발전할 것으로 예상된다. 본 논문은 범용 SCADA 게이트웨이 개발을 위해 DNP 3.0 응용 계층을 분석한 결과를 소개하고 있다. 여기에는 게이트웨이 설계 시 반드시 고려되어야 하는, DNP3.0 응용 계층의 객체 모델링과 객체 의미, 그리고 통신 기능이 포함된다.